CS Paper Radar

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Koki Kanzaki, Katsuya Suto, Koya Sato

eess.SP cs.NI ·submitted 2026-09-10 06:36 UTC · v1

Abstract

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

Comment
16 pages, 11 figures. This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

A Tutorial on Infrastructure Self-Calibration for Radio-Based Indoor Positioning

eess.SP ·2026-11-11 ·Paul Schwarzbach
code/data similarity 0.64
Abstract

Radio positioning needs the positions of its anchors, access points, base stations, or reconfigurable intelligent surfaces, and manual surveying is costly and error-prone. Calibrating this infrastructure from its own measurements is one estimation problem, studied in at least four communities as self-calibration, auto-positioning, anchor self-localization, network localization, or radio simultaneous localization and mapping. This tutorial teaches the problem through one factor graph. The measurement topology sets its factors, the reference information enters as priors, and other measurement models add nuisance states. The tutorial shows what ranges can identify, from rigidity to the motion a mobile device must contribute, and presents multidimensional scaling, nonlinear least squares, recursive filters, and convex relaxations as inference engines over this graph. One session of a ten-anchor ultra-wideband deployment is carried through every step, and recordings from a second, harsher deployment and a public partial mesh serve as contrasts. The examples illustrate three lessons. On a full mesh, choose a robust loss and set its scale first, and calibrate with the engine of the positioning system, since the engines then reach similar errors. On thinned or partial meshes, test the result at surveyed check points, because the start decides which minimum a solver reaches. On a line-of-sight deployment, estimate range offsets, which lower the error floor that a systematic ranging bias sets and a robust loss cannot remove. A decision tree and a table of their effects turn them into deployment guidance. Code and result tables are openly released, and the data are published separately.

0.32

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.62
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.61
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

ChronoChart: Setup-Agnostic Channel Charting for Label-Free Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Majid Sharghi Foroushani, Jonas Pirkl, Jonathan Ott, Maximilian Stahlke, George Yammine +2 more
published similarity 0.60
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Accurate radio-based indoor localization remains challenging in multipath-rich and dynamic indoor environments. Supervised fingerprinting methods achieve high positioning accuracy by learning mappings from radio channel measurements to physical locations, but require costly position labels and frequent recalibration. Channel Charting (CC) addresses this limitation by learning low-dimensional representations of Channel State Information (CSI) without position labels, yielding channel charts in which nearby points correspond to nearby physical locations. However, prominent CC methods rely on setup-specific dissimilarity metrics, such as ADP-, CIRA-, or PDR-based distances, and on precomputed $O(n^2)$ distance matrices, limiting scalability and transferability across radio systems. We propose ChronoChart, a timestamp-supervised CC framework that requires only CSI and timestamps without prior knowledge for training. Our method jointly optimizes complementary objectives: a triplet loss using temporally derived positive and negative samples to establish coarse global structure, a temporal-proximity loss that promotes smooth trajectories in the chart, and a joint-embedding loss that enforces consistency between representations of different augmentations. Evaluated on real-world 5G, MIMO, and passive UWB data, our method matches or exceeds prior CC baselines that depend on tailored distance metrics, and remains scalable and applicable across heterogeneous radio systems.

0.23

Integrated Sensing and Communication via Channel Knowledge Maps Built from Beam Feedback Coefficients

eess.SP ·2026-10-29 ·Chongda Huang, Yue Xiao, Gang Wu, Vladimir Poulkov, Xianfu Lei +1 more
similarity 0.59
Abstract

Channel knowledge maps (CKMs) support wireless localization by linking channel features to user locations. Detailed channel fingerprints, however, can require substantial storage. This paper proposes a CKM-based localization framework that uses beam feedback coefficients collected during communication. These coefficients serve as compact location fingerprints within the beam management process, without requiring full channel feedback or additional sensing measurements. Using a coarse position prior, the base station searches nearby CKM entries and refines the location estimate through local interpolation. We analyze the relationship between spatial fingerprint variation and localization accuracy, and evaluate the effect of feedback quantization. Simulations show favorable storage--accuracy trade-offs relative to dense and sparsified spectral fingerprinting in the tested multipath environments.

0.33

Joint RF-VLP Position and Velocity Tracking: Bayesian Estimation and Performance Analysis

eess.SP ·2026-11-14 ·Chaedam Son, Si-Hyeon Lee
theory similarity 0.59
Abstract · 13 page, 8 figures, this work has been submitted to the IEEE for possible publication

Visible light positioning (VLP) provides accurate indoor positioning through optical received signal strength (RSS) measurements, while radio-frequency (RF) delay and Doppler measurements offer complementary range and velocity information. Motivated by this complementarity, we investigate joint RF--VLP position and velocity tracking, addressing both recursive state estimation and its fundamental performance characteristics. We formulate a Bayesian maximum a posteriori (MAP) estimation problem that combines optical RSS, RF delay and Doppler measurements, and motion prediction, and develop a Gauss--Newton-based algorithm for recursive tracking. To characterize the estimation limits and the benefits of RF--VLP integration, we derive the Bayesian information matrix and the corresponding Bayesian Cramér--Rao lower bound (BCRLB). We further introduce a state-conditioned information matrix (SCIM), whose inverse coincides with the MAP estimator's mean-squared error matrix under a first-order observation model, enabling tractable analysis of RF-induced information gains. The analysis quantifies the distinct contributions of RF delay and Doppler measurements and reveals different asymptotic estimation-error behaviors with respect to RF and VLP signal-to-noise ratios. Numerical results demonstrate improved position and velocity tracking over the considered baselines, with substantial velocity gains from RF sensing. The results also validate the theoretical asymptotic predictions and show that the inverse of the SCIM closely captures the estimator's error trends.

0.25

Improving Radio SLAM via Information Sharing: Collaborative Performance Bounds

eess.SP ·2026-11-16 ·Radovan Juran, Ossi Kaltiokallio, Julia Equi, Jukka Talvitie, Elena Simona Lohan +1 more
published similarity 0.59
Abstract · 7 pages. Accepted for presentation at IEEE VTC2026-Spring

This paper studies the fundamental performance limits of radio-based collaborative simultaneous localization and mapping (C-SLAM) in dense vehicular environments towards the 6G integrated sensing and communications (ISAC) era. We consider a collaborative estimation task consisting of multiple user equipments (UEs) with unknown local state variables together with joint estimation of unknown states of the environment landmarks or targets, using cellular radio measurements. Specifically, a posterior Cramér-Rao bound (PCRB) is derived for such centralized multi-UE cellular radio SLAM with information sharing, capturing the effects of the number of involved UEs, their geometric configuration, and their mutually different abilities to measure or observe different landmarks. The analysis reveals how information sharing scales with UE density, identifies regimes of diminishing returns, and provides estimator-independent limits for collaborative radio-based environment mapping and localization. The provided numerical results validate the proposed framework in a vehicular system context, while also demonstrating substantial gains against more ordinary single-UE radio SLAM approach.

0.40

GLocFM: A Geometry-Aware Foundation Model for 3D Indoor Wireless Localization

eess.SP cs.AI ·2026-08-10 ·Chenghong Bian, Chaozheng Wen, Hongze Chen, Jun Zhang
similarity 0.58
Abstract · 13 pages, single column

Learning-based wireless localizers often fail to utilize geometric information about the propagation environment, limiting their ability to exploit non-line-of-sight (NLoS) propagation and generalize across scenes. To bridge this gap, we propose GLocFM, a Geometry-aware Localization Foundation Model, which jointly exploits WiFi measurements and scene geometry represented as a 3D point cloud. We formulate localization as a maximum-likelihood (ML) estimation problem, where the goal is to find a transmitter position that maximizes the likelihood of the wireless observations conditioned on the scene geometry. The likelihood of a candidate transmitter position is calculated by a learned scoring function that matches the observed delay--angle-of-arrival (AoA) spectrum against the spectrum predicted for that candidate. A hierarchical scene encoder extracts propagation-relevant features to produce geometric priors for LoS and one-bounce reflection paths. For scenarios with imperfect synchronization, we further introduce a time-of-flight (ToF)-robust GLocFM model to handle unknown ToF offsets. GLocFM is trained on a multi-modal synthetic indoor localization dataset comprising 221 diverse scenes whose associated wireless signals are generated using Sionna RT. On both synthetic and the NeRF$^{2}$ dataset based on real measurements, GLocFM reduces mean 3D localization error relative to one of the state-of-the-art localization baselines by 49.5\% and 48.8\%, respectively. Ablations across different number of receiver, bandwidths, and array sizes further demonstrate the effectiveness and robustness of the proposed framework.

0.40