CS Paper Radar

Ray-Traced Augmentation for Signal Strength Based Localization

Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian

cs.NI ·submitted 2026-08-24 23:14 UTC · v1

Abstract

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

Comment
28 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Interpretable Physics Informed WiFi Indoor Localization: Learning an Effective Access Point Geometry and Using It to Prune

cs.AI cs.LG ·2026-09-26 ·Arshia Eftekhari zadeh, Rezvan Nasiri, Hadi Moradi
similarity 0.73
Abstract

Deep learning models can achieve high accuracy for indoor localization, but their black-box nature limits interpretability and the reuse of learned information. We propose a hierarchical deep learning framework for WiFi fingerprint-based indoor localization that jointly predicts user location and learns an effective geometry of the surrounding access points (APs). Physics-informed decoders infer this geometry directly from RSSI measurements and labelled user positions, without requiring the true AP coordinates during training. The learned geometry is then used to rank and prune APs. On the UJIIndoorLoc dataset, the proposed chained model achieves a mean 3D localization error of 7.07 m, reducing error by 26% to 36% compared with baseline models. Previously published methods evaluated on the same official split report errors 10.6% to 31.0% higher. Pruning 35% or 50% of the APs causes only a small loss in localization accuracy. The inferred geometry also enables Fisher-information-based AP ranking even when fingerprint databases do not contain surveyed AP coordinates. Experiments on the Tampere/TUT and UTSIndoorLoc datasets show that geometry-guided AP selection performs comparably to selectors built directly from labelled data. These results show that physics-informed interpretability can improve indoor localization while also supporting effective feature selection.

0.07

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
code/data similarity 0.71
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.20

Resource-Aware Model Selection for Scalable Indoor Localization on HPC Platforms

cs.DC ·2026-09-24 ·Fukuharu Tanaka, Hamada Rizk, Moustafa Youssef, Hirozumi Yamaguchi
published similarity 0.71
Abstract · 20 pages, 15 figures. Accepted for publication in 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Comput…

Large-scale indoor localization is increasingly needed in campuses, smart buildings, factories, and digital-twin infrastructures, where wireless conditions, access-point deployments, and spatial layouts evolve over time. Such systems must be accurate, extendable, and maintainable, allowing new buildings, floors, rooms, and service areas to be added without retraining a monolithic model. Modular learning-based localization supports this goal by assigning independent models to buildings, floors, and fine-grained spatial regions. However, this extendability introduces a high-performance inference challenge: each query may require selecting and executing among hundreds or thousands of local models, making exhaustive inference costly in computation, accelerator memory residency, model loading, and scheduling. This paper presents a resource-aware modular inference framework for WiFi fingerprint-based indoor localization on high-performance and distributed computing platforms. The framework organizes local autoencoder models into a building-floor-spot hierarchy and formulates localization as model selection over a large pretrained model ensemble. To reduce inference cost under resource constraints, we introduce two lightweight execution-pruning strategies: Hierarchical Candidate Pruning, which performs coarse-to-fine model selection, and Trajectory-Aware Pruning, which uses temporal locality in user movement to restrict inference to spatially plausible neighboring models. Experiments on a real-world dataset demonstrate that the proposed framework delivers scalable inference without sacrificing localization quality. Compared with exhaustive evaluation over 735 spot models, Hierarchical Candidate Pruning requires only 67 model evaluations, while Trajectory-Aware Pruning reduces this number to just 10, cutting model executions by 98.6%.

0.28

Efficient Deep Learning Adaptation for Cross-Environment RSS-Based Indoor Localization

eess.SP ·2026-09-08 ·Cien Zhang, Jiaming Zhang
publisheddataset similarity 0.70
Abstract

Received signal strength (RSS)-based indoor localization has attracted increasing attention due to its low cost and compatibility with existing wireless infrastructures. However, RSS measurements are highly sensitive to environmental variations, making it challenging for deep learning-based localization models to generalize across different physical configurations. Driven by these challenges, this paper proposes a scenario-adaptive RSS localization framework based on backbone reuse and efficient adaptation. The proposed architecture consists of a lightweight extractor and a shared backbone, where the extractor projects heterogeneous RSS inputs into a unified feature space and the backbone captures transferable localization knowledge. During adaptation, the backbone trained from the source dataset is reused, while the extractor is optimized to adapt to the new dataset configuration. A short optimization stage is further introduced to slightly refine the backbone with a lower learning rate. Experimental results on four datasets demonstrate that the proposed training strategy enables faster convergence and improved adaptation compared with training from scratch. In addition, the proposed framework reduces training time under different dataset configurations, verifying its effectiveness and efficiency for adaptive RSS-based indoor localization.

0.19

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.70
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39

Scaling Cheap Synthetic Pretraining Improves Indoor Radio-Map Prediction

cs.LG cs.AI ·2026-10-13 ·Khoren Petrosyan, Artashes Mkrtchyan, Rafayel Mkrtchyan, Hrant Khachatrian, Theofanis P. Raptis
top venuebenchmarkcode/data similarity 0.68
Abstract · Accepted at NeurIPS 2026. This research was in part sponsored by the HESC MESCS RA grant No. 22rl-052 (DISTAL), and by the NATO Science for …

Real measurements are too limited to train an accurate indoor pathloss predictor that works across a wide range of buildings. Large-scale synthetic pretraining offers a way forward, but real building layouts are also scarce, and accurate ray-tracing simulators are slow, expensive, and often proprietary. We address both problems by introducing a generator that automatically creates diverse indoor layouts and a fast, open-source approximate ray tracer that computes radio maps for them. Using this pipeline, we generate 128M synthetic samples, pretrain ResNet-101 and Swin-T encoder-decoders, and fine-tune them on high-quality benchmark data. Despite simulator mismatch, our ResNet-101 model reduces error by 15% on average relative to the best known methods across five indoor radio-map prediction tasks and improves transfer on a small real-measurement dataset. Both architectures show predictable data-scaling trends: power laws fitted on 2M-16M samples predict the mean normalized downstream RMSE at 32M-128M with 3.33% mean absolute percentage error for ResNet-101 and 7.10% for Swin-T. These results show that pretraining on large amounts of cheap simulated data can improve indoor radio-map prediction, even when real measurements and high-quality simulations are limited.

0.38

GLocFM: A Geometry-Aware Foundation Model for 3D Indoor Wireless Localization

eess.SP cs.AI ·2026-08-10 ·Chenghong Bian, Chaozheng Wen, Hongze Chen, Jun Zhang
similarity 0.67
Abstract · 13 pages, single column

Learning-based wireless localizers often fail to utilize geometric information about the propagation environment, limiting their ability to exploit non-line-of-sight (NLoS) propagation and generalize across scenes. To bridge this gap, we propose GLocFM, a Geometry-aware Localization Foundation Model, which jointly exploits WiFi measurements and scene geometry represented as a 3D point cloud. We formulate localization as a maximum-likelihood (ML) estimation problem, where the goal is to find a transmitter position that maximizes the likelihood of the wireless observations conditioned on the scene geometry. The likelihood of a candidate transmitter position is calculated by a learned scoring function that matches the observed delay--angle-of-arrival (AoA) spectrum against the spectrum predicted for that candidate. A hierarchical scene encoder extracts propagation-relevant features to produce geometric priors for LoS and one-bounce reflection paths. For scenarios with imperfect synchronization, we further introduce a time-of-flight (ToF)-robust GLocFM model to handle unknown ToF offsets. GLocFM is trained on a multi-modal synthetic indoor localization dataset comprising 221 diverse scenes whose associated wireless signals are generated using Sionna RT. On both synthetic and the NeRF$^{2}$ dataset based on real measurements, GLocFM reduces mean 3D localization error relative to one of the state-of-the-art localization baselines by 49.5\% and 48.8\%, respectively. Ablations across different number of receiver, bandwidths, and array sizes further demonstrate the effectiveness and robustness of the proposed framework.

0.40

Cross-Domain Inference for Human Localization: Applying Wi-Fi RSSI Data to CSI-Trained Models

cs.CR cs.LGcs.NI ·2026-09-15 ·Ariel Duschanek-Myers, Thomas Welsh, Helmut Neukirchen
top venue similarity 0.67
Abstract

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.

0.43