CS Paper Radar

Efficient Deep Learning Adaptation for Cross-Environment RSS-Based Indoor Localization

Cien Zhang, Jiaming Zhang

eess.SP ·submitted 2026-09-08 12:01 UTC · v1
publisheddataset

Abstract

Received signal strength (RSS)-based indoor localization has attracted increasing attention due to its low cost and compatibility with existing wireless infrastructures. However, RSS measurements are highly sensitive to environmental variations, making it challenging for deep learning-based localization models to generalize across different physical configurations. Driven by these challenges, this paper proposes a scenario-adaptive RSS localization framework based on backbone reuse and efficient adaptation. The proposed architecture consists of a lightweight extractor and a shared backbone, where the extractor projects heterogeneous RSS inputs into a unified feature space and the backbone captures transferable localization knowledge. During adaptation, the backbone trained from the source dataset is reused, while the extractor is optimized to adapt to the new dataset configuration. A short optimization stage is further introduced to slightly refine the backbone with a lower learning rate. Experimental results on four datasets demonstrate that the proposed training strategy enables faster convergence and improved adaptation compared with training from scratch. In addition, the proposed framework reduces training time under different dataset configurations, verifying its effectiveness and efficiency for adaptive RSS-based indoor localization.

Closest papers

Nearest neighbours by meaning across the whole index.

Foundation Models for Wireless Localization: Pretraining, Adaptation, and Utilization

eess.SP ·2026-08-31 ·Guangjin Pan, Jiajia Guo, Zheng Xing, Hui Chen, Chao-Kai Wen +2 more
similarity 0.72
Abstract · 4 pages, 1 table. This work has been submitted to the IEEE for possible publication

Accurate wireless localization is a key enabler for 6G networks, yet remains challenging under diverse and rapidly changing propagation conditions. Model-based methods degrade when multipath channels are non-resolvable and model mismatches occur, while supervised deep learning demands large labeled datasets and generalizes poorly to new deployments. Inspired by foundation models (FMs) in language and vision, this article presents a unified framework for FM-based wireless localization that learns transferable channel representations from large-scale unlabeled channel state information and adapts to new environments with minimal or even no supervision. We review the fundamentals of FMs, compare the FM paradigm with existing localization approaches, and introduce a three-stage framework spanning large-scale pretraining, localization-oriented fine-tuning, and context-augmented inference, together with the location-aware applications it enables. Ray-tracing-based case studies show improved positioning accuracy and cross-environment generalization. Finally, we present an outlook on key research directions toward AI-native networks for wireless localization.

0.21

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.70
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Resource-Aware Model Selection for Scalable Indoor Localization on HPC Platforms

cs.DC ·2026-09-24 ·Fukuharu Tanaka, Hamada Rizk, Moustafa Youssef, Hirozumi Yamaguchi
published similarity 0.69
Abstract · 20 pages, 15 figures. Accepted for publication in 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Comput…

Large-scale indoor localization is increasingly needed in campuses, smart buildings, factories, and digital-twin infrastructures, where wireless conditions, access-point deployments, and spatial layouts evolve over time. Such systems must be accurate, extendable, and maintainable, allowing new buildings, floors, rooms, and service areas to be added without retraining a monolithic model. Modular learning-based localization supports this goal by assigning independent models to buildings, floors, and fine-grained spatial regions. However, this extendability introduces a high-performance inference challenge: each query may require selecting and executing among hundreds or thousands of local models, making exhaustive inference costly in computation, accelerator memory residency, model loading, and scheduling. This paper presents a resource-aware modular inference framework for WiFi fingerprint-based indoor localization on high-performance and distributed computing platforms. The framework organizes local autoencoder models into a building-floor-spot hierarchy and formulates localization as model selection over a large pretrained model ensemble. To reduce inference cost under resource constraints, we introduce two lightweight execution-pruning strategies: Hierarchical Candidate Pruning, which performs coarse-to-fine model selection, and Trajectory-Aware Pruning, which uses temporal locality in user movement to restrict inference to spatially plausible neighboring models. Experiments on a real-world dataset demonstrate that the proposed framework delivers scalable inference without sacrificing localization quality. Compared with exhaustive evaluation over 735 spot models, Hierarchical Candidate Pruning requires only 67 model evaluations, while Trajectory-Aware Pruning reduces this number to just 10, cutting model executions by 98.6%.

0.28

Cross-Area Transfer Learning for VLC-based Indoor Localization with a Transfer Efficiency Score

cs.LG eess.SP ·2026-10-21 ·Masood Jan, Wafa Njima, Xun Zhang, Alexander Artemenko
published similarity 0.65
Abstract

Indoor localization systems are critical for Industry-4.0 applications. Visible Light Communication (VLC)-based systems offer advantages such as immunity to electromagnetic interference, high accuracy, and energy efficiency, but their performance is hindered by environmental variability across deployment areas. This paper presents a transfer learning (TL) framework for VLC-based indoor localization that enhances cross-area robustness while reducing data requirements. Using real-world measurements from four distinct areas of a Bosch manufacturing facility, we show that fine-tuning a deep neural network (DNN) pre-trained on source area data with only 40% of target-area measurements recovers 97% of full-data performance, thereby reducing the amount of target data needed. We further introduce the Transfer Efficiency Score (TES), a composite metric that identifies the most effective source models for transfer without exhaustive evaluation. Guided by TES, the framework selects the best source model, yielding localization errors as low as 40.9 cm with success rates above 86%. Validation on an unseen area confirms its generalization capability, with a 3.28 cm mean error achieved using the TES-selected source model. Overall, the proposed framework provides a scalable and data-efficient pathway for industrial VLC localization, substantially reducing deployment costs and computational burden while maintaining high accuracy in diverse and dynamic environments.

0.36

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
publishedcode/data similarity 0.64
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.28

Interpretable Physics Informed WiFi Indoor Localization: Learning an Effective Access Point Geometry and Using It to Prune

cs.AI cs.LG ·2026-09-26 ·Arshia Eftekhari zadeh, Rezvan Nasiri, Hadi Moradi
similarity 0.64
Abstract

Deep learning models can achieve high accuracy for indoor localization, but their black-box nature limits interpretability and the reuse of learned information. We propose a hierarchical deep learning framework for WiFi fingerprint-based indoor localization that jointly predicts user location and learns an effective geometry of the surrounding access points (APs). Physics-informed decoders infer this geometry directly from RSSI measurements and labelled user positions, without requiring the true AP coordinates during training. The learned geometry is then used to rank and prune APs. On the UJIIndoorLoc dataset, the proposed chained model achieves a mean 3D localization error of 7.07 m, reducing error by 26% to 36% compared with baseline models. Previously published methods evaluated on the same official split report errors 10.6% to 31.0% higher. Pruning 35% or 50% of the APs causes only a small loss in localization accuracy. The inferred geometry also enables Fisher-information-based AP ranking even when fingerprint databases do not contain surveyed AP coordinates. Experiments on the Tampere/TUT and UTSIndoorLoc datasets show that geometry-guided AP selection performs comparably to selectors built directly from labelled data. These results show that physics-informed interpretability can improve indoor localization while also supporting effective feature selection.

0.07

Orientation-Aware Deep Learning Framework for RSSI-Based Indoor Localization in RIS-Aided mmWave Systems

cs.NI eess.SP ·2026-10-15 ·Varun S. Advani, Ahmed Nasser, Mohamed Y. Selim, Ahmed M. Eltawil
similarity 0.64
Abstract · 18 pages, 11 figures, 10 tables. Under review at IEEE Transactions on Machine Learning in Communications and Networking

Reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) systems provide directional measurements of received power for indoor localization, but device orientation changes the fingerprints. This work proposes an orientation-aware dual-stream gated (O-DSG) deep learning framework for received signal strength indicator (RSSI)-based indoor localization. An orientation classifier estimates device orientation from RSSI, so inference needs only received power. An embedding of the predicted angle and posterior entropy controls feature modulation and soft expert gating. Parallel convolutional and statistical streams are fused through bidirectional long short-term memory (BiLSTM) processing and temporal attention. Single-user measurements in an indoor laboratory at 28 GHz under non-line-of-sight (NLoS) conditions yield a median localization error of 0.141 m, a 25.8% improvement over the closest evaluated baseline (supplied with the measured orientation), and 92.3% orientation classification accuracy across four discrete classes. In spatial regions withheld from training, O-DSG has an average median error of 0.247 m, against 0.392 m for a validation-selected sequence model. A separate offline evaluation constructs non-orthogonal multiple access (NOMA)-style power mixtures from the single-user measurements and measures localization accuracy and computational scaling with up to eight emulated users whose power contributions overlap, under the specified mixture model.

0.25

A Transfer Learning-Driven Methodology for Efficient and Sustainable Indoor Localization Using VLC

cs.LG eess.SP ·2026-10-21 ·Masood Jan, Wafa Njima, Xun Zhang, Alexander Artemenko
published similarity 0.63
Abstract

The rapid expansion of the Internet of Things enables seamless collaboration among connected devices, making indoor localization a critical component of industrial automation. However, conventional localization techniques struggle in dynamic environments. These methods depend on extensive, frequent data collection and environment-specific calibration, limiting scalability, interoperability, and effective use of prior research while imposing significant energy penalties that hinder practical deployment. To address these challenges, we propose an energy-efficient transfer learning (TL) based approach for visible light communication based indoor localization. Our method leverages TL to tackle environmental variability, including lighting fluctuations and physical obstacles that typically degrade localization performance, while simultaneously reducing computational overhead and energy consumption compared to conventional approaches. We also introduce a novel model efficiency (ME) metric, designed to integrate localization accuracy, energy efficiency, data efficiency, and transfer gain into a single evaluative measure for comprehensive optimization. Evaluations on a real-world dataset collected from a BOSCH factory demonstrate that our model achieves a 47% improvement in localization accuracy compared to a conventional model that does not utilize TL, and achieves up to 67.5% ME with TL models, compared to only 10.4% in conventional models under high-noise conditions. These results underscore the potential of our approach to deliver a highly efficient and scalable indoor localization system suitable for energy-constrained industrial applications.

0.63