CS Paper Radar

Orientation-Aware Deep Learning Framework for RSSI-Based Indoor Localization in RIS-Aided mmWave Systems

Varun S. Advani, Ahmed Nasser, Mohamed Y. Selim, Ahmed M. Eltawil

cs.NI eess.SP ·submitted 2026-10-15 00:36 UTC · v1

Abstract

Reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) systems provide directional measurements of received power for indoor localization, but device orientation changes the fingerprints. This work proposes an orientation-aware dual-stream gated (O-DSG) deep learning framework for received signal strength indicator (RSSI)-based indoor localization. An orientation classifier estimates device orientation from RSSI, so inference needs only received power. An embedding of the predicted angle and posterior entropy controls feature modulation and soft expert gating. Parallel convolutional and statistical streams are fused through bidirectional long short-term memory (BiLSTM) processing and temporal attention. Single-user measurements in an indoor laboratory at 28 GHz under non-line-of-sight (NLoS) conditions yield a median localization error of 0.141 m, a 25.8% improvement over the closest evaluated baseline (supplied with the measured orientation), and 92.3% orientation classification accuracy across four discrete classes. In spatial regions withheld from training, O-DSG has an average median error of 0.247 m, against 0.392 m for a validation-selected sequence model. A separate offline evaluation constructs non-orthogonal multiple access (NOMA)-style power mixtures from the single-user measurements and measures localization accuracy and computational scaling with up to eight emulated users whose power contributions overlap, under the specified mixture model.

Comment
18 pages, 11 figures, 10 tables. Under review at IEEE Transactions on Machine Learning in Communications and Networking

Closest papers

Nearest neighbours by meaning across the whole index.

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
code/data similarity 0.65
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.20

Practical Deep Learning-Based Block Demapping for mmWave MIMO Systems

cs.AR ·2026-11-08 ·Syed Asrar ul haq, Jesus O. Lacruz, Joerg Widmer, Sumit J. Darak
published similarity 0.64
Abstract · Submitted for publication to IEEE Transactions on Wireless Communications

Deep learning is expected to play a central role in 6G systems, by enabling data-driven physical layer designs that can adapt to practical wireless impairments. This is particularly important for millimetre-wave (mmWave) multiple-input multiple-output (MIMO) systems, which are strongly affected by residual channel distortions, interference, and hardware non-idealities that are difficult to capture with analytical models. In this paper, we propose a deep learning-based soft demapper that performs block-wise processing of received symbols instead of conventional symbol-wise detection. The demapper employs a one-dimensional convolutional neural network to learn temporal structure induced by practical propagation and hardware effects, while producing soft bit outputs compatible with soft-decision decoding stages. The proposed approach is trained and evaluated for a 4$\times$4 wideband mmWave MIMO system at 60~GHz, using an over-the-air dataset collected across multiple days and settings. Experimental results demonstrate consistent improvements over a conventional soft-decision demapper, including up to a 2.6$\times$ reduction in bit error rate for 16QAM and up to a 17.6$\times$ reduction for 64QAM under real over-the-air mmWave MIMO conditions. The proposed demapper is further implemented on a Zynq RFSoC platform using a reconfigurable convolution engine and fixed-point arithmetic, achieving an approximately 34.3$\times$ speedup compared to a processor-based implementation, and demonstrating that learning-based demapping can be deployed efficiently on resource-constrained edge hardware.

0.32

Efficient Deep Learning Adaptation for Cross-Environment RSS-Based Indoor Localization

eess.SP ·2026-09-08 ·Cien Zhang, Jiaming Zhang
publisheddataset similarity 0.64
Abstract

Received signal strength (RSS)-based indoor localization has attracted increasing attention due to its low cost and compatibility with existing wireless infrastructures. However, RSS measurements are highly sensitive to environmental variations, making it challenging for deep learning-based localization models to generalize across different physical configurations. Driven by these challenges, this paper proposes a scenario-adaptive RSS localization framework based on backbone reuse and efficient adaptation. The proposed architecture consists of a lightweight extractor and a shared backbone, where the extractor projects heterogeneous RSS inputs into a unified feature space and the backbone captures transferable localization knowledge. During adaptation, the backbone trained from the source dataset is reused, while the extractor is optimized to adapt to the new dataset configuration. A short optimization stage is further introduced to slightly refine the backbone with a lower learning rate. Experimental results on four datasets demonstrate that the proposed training strategy enables faster convergence and improved adaptation compared with training from scratch. In addition, the proposed framework reduces training time under different dataset configurations, verifying its effectiveness and efficiency for adaptive RSS-based indoor localization.

0.19

Interpretable Physics Informed WiFi Indoor Localization: Learning an Effective Access Point Geometry and Using It to Prune

cs.AI cs.LG ·2026-09-26 ·Arshia Eftekhari zadeh, Rezvan Nasiri, Hadi Moradi
similarity 0.63
Abstract

Deep learning models can achieve high accuracy for indoor localization, but their black-box nature limits interpretability and the reuse of learned information. We propose a hierarchical deep learning framework for WiFi fingerprint-based indoor localization that jointly predicts user location and learns an effective geometry of the surrounding access points (APs). Physics-informed decoders infer this geometry directly from RSSI measurements and labelled user positions, without requiring the true AP coordinates during training. The learned geometry is then used to rank and prune APs. On the UJIIndoorLoc dataset, the proposed chained model achieves a mean 3D localization error of 7.07 m, reducing error by 26% to 36% compared with baseline models. Previously published methods evaluated on the same official split report errors 10.6% to 31.0% higher. Pruning 35% or 50% of the APs causes only a small loss in localization accuracy. The inferred geometry also enables Fisher-information-based AP ranking even when fingerprint databases do not contain surveyed AP coordinates. Experiments on the Tampere/TUT and UTSIndoorLoc datasets show that geometry-guided AP selection performs comparably to selectors built directly from labelled data. These results show that physics-informed interpretability can improve indoor localization while also supporting effective feature selection.

0.07

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.61
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.61
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Foundation Models for Wireless Localization: Pretraining, Adaptation, and Utilization

eess.SP ·2026-08-31 ·Guangjin Pan, Jiajia Guo, Zheng Xing, Hui Chen, Chao-Kai Wen +2 more
similarity 0.61
Abstract · 4 pages, 1 table. This work has been submitted to the IEEE for possible publication

Accurate wireless localization is a key enabler for 6G networks, yet remains challenging under diverse and rapidly changing propagation conditions. Model-based methods degrade when multipath channels are non-resolvable and model mismatches occur, while supervised deep learning demands large labeled datasets and generalizes poorly to new deployments. Inspired by foundation models (FMs) in language and vision, this article presents a unified framework for FM-based wireless localization that learns transferable channel representations from large-scale unlabeled channel state information and adapts to new environments with minimal or even no supervision. We review the fundamentals of FMs, compare the FM paradigm with existing localization approaches, and introduce a three-stage framework spanning large-scale pretraining, localization-oriented fine-tuning, and context-augmented inference, together with the location-aware applications it enables. Ray-tracing-based case studies show improved positioning accuracy and cross-environment generalization. Finally, we present an outlook on key research directions toward AI-native networks for wireless localization.

0.21

LocAttMamba: A Low-Complexity Mamba Framework with Attention-Based Multi-AP Fusion for Indoor Localization

cs.NI ·2026-10-05 ·MohammadMahdi Ghadaksaz, Mohammad Farzanullah, Melike Erol-Kantarci
benchmark similarity 0.60
Abstract

Accurate and low-complexity indoor localization is important for location-based services in fifth generation (5G) and sixth generation (6G) networks, where positioning devices operate under limited computational budgets and non conditions. Indoor localization has been studied widely using traditional signal-level localization approaches. However, these techniques often show degraded performance in on-line-of-sight (NLoS) scenarios. Recently, artificial intelligence (AI)-based techniques, including transformers, have been applied to address these challenges. While transformer-based architectures can capture the dependencies within the measurements collected from distributed access points (APs), their high computational complexity results in a large number of multiply-accumulate operations and long inference time. In contrast, lightweight recurrent and convolutional models trade this cost for degraded accuracy. In this paper, we propose LocAttMamba, a low-complexity localization framework in which the channel impulse response (CIR) and time-based features of each AP are processed by a separate Mamba encoder with near-linear complexity, and the resulting per-AP embeddings are fused through a multi-head attention layer that weights each AP according to its importance at every time step. The framework jointly predicts the user location and its per-axis uncertainty, which is refined through a post-hoc calibration step. We evaluate the proposed framework using two real-world 5G and ultra-wideband (UWB) measurement datasets. Our numerical results reveal that LocAttMamba obtains a mean two-dimensional (2-D) positioning error of 1.004 m and 0.599 m, respectively, on 5G and UWB datasets, outperforming the second-best benchmark by 9.79% and 5.82%, while requiring the fewest multiply-accumulate operations among all evaluated models and being 4.4-16 times faster than the transformer-based benchmarks.

0.19