CS Paper Radar

Scaling Cheap Synthetic Pretraining Improves Indoor Radio-Map Prediction

Khoren Petrosyan, Artashes Mkrtchyan, Rafayel Mkrtchyan, Hrant Khachatrian, Theofanis P. Raptis

cs.LG cs.AI ·submitted 2026-10-13 18:09 UTC · v1
top venuebenchmarkcode/data

Abstract

Real measurements are too limited to train an accurate indoor pathloss predictor that works across a wide range of buildings. Large-scale synthetic pretraining offers a way forward, but real building layouts are also scarce, and accurate ray-tracing simulators are slow, expensive, and often proprietary. We address both problems by introducing a generator that automatically creates diverse indoor layouts and a fast, open-source approximate ray tracer that computes radio maps for them. Using this pipeline, we generate 128M synthetic samples, pretrain ResNet-101 and Swin-T encoder-decoders, and fine-tune them on high-quality benchmark data. Despite simulator mismatch, our ResNet-101 model reduces error by 15% on average relative to the best known methods across five indoor radio-map prediction tasks and improves transfer on a small real-measurement dataset. Both architectures show predictable data-scaling trends: power laws fitted on 2M-16M samples predict the mean normalized downstream RMSE at 32M-128M with 3.33% mean absolute percentage error for ResNet-101 and 7.10% for Swin-T. These results show that pretraining on large amounts of cheap simulated data can improve indoor radio-map prediction, even when real measurements and high-quality simulations are limited.

Comment
Accepted at NeurIPS 2026. This research was in part sponsored by the HESC MESCS RA grant No. 22rl-052 (DISTAL), and by the NATO Science for Peace and Security Programme under grant ID G9270 (OASIS)

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Unrolled Neural Operator for Accelerating High-Fidelity Wireless Ray Tracing

cs.LG cs.AI ·2026-08-19 ·Rafid Umayer Murshed, Saif Ur Rahman, Mingyue Tang, Elahe Soltanaghai
top venuetheoryhot direction similarity 0.68
Abstract · Accepted at NeurIPS 2026 (camera-ready version). 42 pages, 8 figures, 14 tables

Site-specific wireless design relies on ray tracing to predict how signal strength varies across a floorplan, but a converged indoor radio map takes tens of seconds to simulate and planning a single building requires thousands of them. A learned surrogate can remove most of that cost, yet training one runs into a second problem: high-fidelity labels are exactly what is too expensive to produce at scale, so the affordable labels come from finite-ray simulations that carry residual Monte Carlo noise. We address this with RayNO, a physics-unrolled neural operator that reconstructs the converged output of a ray tracer from one cheap low-fidelity run and scene priors. Rather than treating a radio map as a generic image, RayNO refines the field through three stages matched to reflection, diffraction, and scattering, each supervised by a label of matching physical complexity. We prove that when the label error is conditionally unbiased the learned operator can end up closer to the high-fidelity reference than the labels it was trained on, and we verify that condition directly in the simulator using repeated independent ray seeds. Across diverse floorplans, RayNO outperforms image-to-image baselines, wireless learning models, monolithic neural operators, and classical multi-fidelity regression on both image-quality and wireless deployment metrics, while reducing the cost of a high-fidelity map from roughly 28 s to 0.11 s.

0.51

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.68
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

DyTransRM: A Unified Simulation-to-Real Framework for Dynamic Radio Map Prediction

eess.SP ·2026-11-14 ·Simin Wang, Jiayi Wei, Jihong Li, Guhan Zheng, Rui Cheng +1 more
similarity 0.66
Abstract · 14 pages, 5 figures

Dynamic radio map (RM) prediction enables proactive wireless network control by forecasting future propagation conditions from historical observations. However, collecting temporally continuous and spatially dense real-world RMs is prohibitively expensive, while models trained on large-scale simulated data often suffer from limited transferability to real environments. To address this issue, we propose DyTransRM, a unified simulation-to-real framework for dynamic RM prediction under sparse real-world measurements. DyTransRM first introduces RadioCLIP to learn physics-semantic representations by aligning environmental evolution with the corresponding propagation evolution, thereby improving both prediction accuracy and cross-domain transferability. To further bridge the simulation-to-real gap, SparseUOT employs sparse-mask simulation refinement to mimic realistic measurement patterns and unbalanced optimal transport to selectively align compatible propagation representations across domains. Experiments on RadioMapMotion and real-world datasets demonstrate that RadioCLIP achieves an NMSE of 0.0018 and an RMSE of 0.012 in simulation-domain prediction. After sparse real-domain adaptation, DyTransRM achieves an NMSE of 0.023, RMSE of 0.079, and MAE of 0.064, outperforming representative adaptation baselines without requiring spatially complete real RMs. These results demonstrate the effectiveness of DyTransRM for transferring simulation-learned dynamic propagation knowledge to practical sparse-measurement scenarios.

0.36

SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

eess.SP ·2026-09-05 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +3 more
similarity 0.64
Abstract · 6 pages, 4 figures

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

0.19

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.62
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Channel2World: A Wireless Foundation Model for RF Environment Representation

eess.SP ·2026-08-18 ·Hyung-Joo Moon, Joonkyu Jang, Kwang Soon Kim, Seong-Lyun Kim, Robert W. Heath +1 more
similarity 0.62
Abstract · 13 pages, 10 figures

Wireless channels are commonly treated as link-specific observations, although their multipath structure is governed by the surrounding radio-frequency (RF) environment. In this paper, we propose Channel2World, a wireless foundation model that learns a reusable environment-level representation from multiple-input multiple-output (MIMO) channel-position observations. The model aggregates channels collected within the same base-station-centered environment into a wireless world embedding using a Transformer-based encoder. The encoder is pretrained through context-query prediction, where context channels condition user equipment (UE) position and relative path-gain prediction for disjoint query channels. After pretraining, the encoder is frozen and used as a task-agnostic environment-conditioning module for downstream wireless models, enabling adaptation to unseen environments without site-specific fine-tuning. To learn an environment-level latent space that generalizes across deployments, we pretrain Channel2World using ray-tracing data from 26,000 environments, with approximately 5,000 channel measurements per environment. Evaluations on UE localization, beam-domain channel state information (CSI) reconstruction, and RF-observable geometry reconstruction show that the learned embeddings provide effective conditioning in unseen environments. For localization and CSI reconstruction tasks, embedding-based conditioning outperforms or remains competitive with site-specific fine-tuning, although fine-tuning requires task-specific labeled data and additional gradient-based adaptation. The embeddings also support the reconstruction of dominant reflector structures, indicating their utility as reusable environmental priors across tasks.

0.43

Synergizing Data-Driven Learning and Physical Rendering for Radio Map Prediction

eess.SP ·2026-11-12 ·Junyu Jiang, Jing Wang, Yantao Wang, Xinhao Li, Yi Zhang +2 more
similarity 0.62
Abstract

Accurate urban radio map prediction is challenging due to complex building geometries and sophisticated electromagnetic interactions. To address this, we propose a data- and physics-driven framework that decouples wave propagation from environmental feature extraction. The core idea is to predict a sparse set of low-dimensional Secondary Reradiation Points (SRPs), which, together with a closed-form renderer deduced from electromagnetic theory, yields the final radio map. By learning these SRPs end-to-end rather than directly regressing the high-dimensional map, the neural network focuses on a compact physical parameterization, significantly improving accuracy and generalization. Numerical experiments demonstrate that our framework outperforms all seven baselines and consistently yields the lowest errors across all building-coverage quintiles, underscoring its robustness in dense, heavily obstructed urban environments.

0.17

CHANNELS4WORLD: An Environment-Scale Dataset for Wireless Foundation Models

cs.LG cs.ITeess.SP ·2026-11-08 ·Joonkyu Jang, Hyung-Joo Moon, Kwang Soon Kim, Seong-Lyun Kim, Jakob Hoydis +2 more
dataset similarity 0.61
Abstract · 21 pages, 7 figures, 7 tables

Wireless foundation models learn reusable representations across tasks, configurations, and deployment environments. Their pretraining requires environmental breadth, yet wireless datasets often sample few sites densely. We introduce Channels4World, a scene-centered dataset of 100,000 distinct outdoor RF scenes and a procedural method for generating them. Each scene links a generated environment and RF material assignments to 32 base-station (BS) positions, 16,384 UE positions, and aligned variable-length multipath and ordered interaction records at 3.5 and 7~GHz. The corpus comprises 52.43 billion physical BS-UE pairs, 104.86 billion frequency-specific evaluations, and a 29.14-TB packaged payload. Scene identity aligns geometry, placements, channels, and interactions across frequencies, allowing environmental breadth and within-scene observation density to vary independently. The public release offers predefined subsets at multiple scales and separate access to corpus components. A deterministic 90K/10K scene-level train-test split keeps both frequencies and all scene components together. We characterize morphology, RF materials, and transceiver placement across three generation profiles. Controlled propagation and path-retention analyses show that diffraction materially affects retained-link availability and multipath structure, while the retention policy reduces storage substantially with little loss in represented aggregate power. Under matched training exposure, models trained on broader scene collections perform better on held-out scenes, although an equal-episode control shows that scene count alone cannot explain the gain. By making environmental breadth explicit and controllable, Channels4World supports the development and evaluation of wireless foundation models for generalization across deployment environments.

0.27