CS Paper Radar

SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte, Peijie Ma, Dipankar Shakya, Theodore S. Rappaport

eess.SP ·submitted 2026-09-05 13:09 UTC · v1

Abstract

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

Comment
6 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Scaling Cheap Synthetic Pretraining Improves Indoor Radio-Map Prediction

cs.LG cs.AI ·2026-10-13 ·Khoren Petrosyan, Artashes Mkrtchyan, Rafayel Mkrtchyan, Hrant Khachatrian, Theofanis P. Raptis
top venuebenchmarkcode/data similarity 0.64
Abstract · Accepted at NeurIPS 2026. This research was in part sponsored by the HESC MESCS RA grant No. 22rl-052 (DISTAL), and by the NATO Science for …

Real measurements are too limited to train an accurate indoor pathloss predictor that works across a wide range of buildings. Large-scale synthetic pretraining offers a way forward, but real building layouts are also scarce, and accurate ray-tracing simulators are slow, expensive, and often proprietary. We address both problems by introducing a generator that automatically creates diverse indoor layouts and a fast, open-source approximate ray tracer that computes radio maps for them. Using this pipeline, we generate 128M synthetic samples, pretrain ResNet-101 and Swin-T encoder-decoders, and fine-tune them on high-quality benchmark data. Despite simulator mismatch, our ResNet-101 model reduces error by 15% on average relative to the best known methods across five indoor radio-map prediction tasks and improves transfer on a small real-measurement dataset. Both architectures show predictable data-scaling trends: power laws fitted on 2M-16M samples predict the mean normalized downstream RMSE at 32M-128M with 3.33% mean absolute percentage error for ResNet-101 and 7.10% for Swin-T. These results show that pretraining on large amounts of cheap simulated data can improve indoor radio-map prediction, even when real measurements and high-quality simulations are limited.

0.38

Physics-Unrolled Neural Operator for Accelerating High-Fidelity Wireless Ray Tracing

cs.LG cs.AI ·2026-08-19 ·Rafid Umayer Murshed, Saif Ur Rahman, Mingyue Tang, Elahe Soltanaghai
top venuetheoryhot direction similarity 0.62
Abstract · Accepted at NeurIPS 2026 (camera-ready version). 42 pages, 8 figures, 14 tables

Site-specific wireless design relies on ray tracing to predict how signal strength varies across a floorplan, but a converged indoor radio map takes tens of seconds to simulate and planning a single building requires thousands of them. A learned surrogate can remove most of that cost, yet training one runs into a second problem: high-fidelity labels are exactly what is too expensive to produce at scale, so the affordable labels come from finite-ray simulations that carry residual Monte Carlo noise. We address this with RayNO, a physics-unrolled neural operator that reconstructs the converged output of a ray tracer from one cheap low-fidelity run and scene priors. Rather than treating a radio map as a generic image, RayNO refines the field through three stages matched to reflection, diffraction, and scattering, each supervised by a label of matching physical complexity. We prove that when the label error is conditionally unbiased the learned operator can end up closer to the high-fidelity reference than the labels it was trained on, and we verify that condition directly in the simulator using repeated independent ray seeds. Across diverse floorplans, RayNO outperforms image-to-image baselines, wireless learning models, monolithic neural operators, and classical multi-fidelity regression on both image-quality and wireless deployment metrics, while reducing the cost of a high-fidelity map from roughly 28 s to 0.11 s.

0.51

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

eess.SP ·2026-10-06 ·Wenyu Huang, Alireza Javid, Nuria González-Prelcic
code/data similarity 0.60
Abstract · This work has been submitted to the IEEE for possible publication

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

0.25

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.60
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

MPSi: Neural Extraction of Site-Specific Multipath Propagation Properties for Massive MIMO

eess.SP ·2026-11-07 ·Maryam Rezvani, Raviraj Adve, Amr El-Keyi, Akram bin Sediq
similarity 0.59
Abstract · Submitted to IEEE for possible publication

Accurate extraction of site-specific multipath propagation properties enables a wide range of wireless applications, including initial access, wideband channel reconstruction, and the generation of channel datasets for learning-based and continual-learning systems. Classical parametric channel-sounding algorithms such as RIMAX provide physically interpretable estimates, but their data-dependent model-order selection and iterative nonlinear refinement introduce substantial delay and computational cost. This paper proposes MPSi, a physics-guided neural framework that replaces these costly stages with a compact path-count network and a fixed-depth, deep-unfolded Levenberg-Marquardt refinement. MPSi estimates the complex gain, angle of arrival, and propagation delay of each multipath component while preserving the underlying physical channel model. We evaluate MPSi in two site-specific ray-traced environments, a small cell and a dense urban area, and show that it achieves initial-access and full-channel-estimation performance comparable to an enhanced RIMAX baseline while requiring significantly fewer optimization iterations. The reconstructed channels also yield bit-error-rate performance close to the perfect-channel knowledge reference. These results position MPSi as a promising low-overhead framework for extracting multipath propagation properties in massive-MIMO systems and for generating cell-specific channel pseudo-labels for training when direct ground-truth measurements are unavailable.

0.31

PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3

eess.SP ·2026-10-02 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +2 more
published similarity 0.58
Abstract · 5 pages, 3 figures, 3 tables. Presented at the 2026 Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, CA, USA, Oct. 25-…

Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz, degrading outdoor-to-indoor (O2I) coverage. A reconfigurable intelligent surface (RIS) on a neighboring building bypasses this blockage by focusing energy onto indoor users. This paper introduces PRIMO (Parallel RIS Min-Rate Optimization), a training-free joint optimizer of base-station precoding, RIS phase shifts, and RIS placement, validated by calibrated ray tracing in a MetroTech Commons digital twin (Brooklyn, NY) at 6.75 and 16.95 GHz. At equal physical aperture, half-wavelength spacing packs 6.25 times as many elements per array at FR3 as at FR1(C), so FR1(C) leads at low indoor-user counts while FR3 dominates at higher counts, where the additional spatial degrees of freedom suppress inter-user interference. Above a 1 bps/Hz service floor, PRIMO supports 92% more indoor users at FR3 than at FR1(C), and raises the minimum user rate by up to 90% over a fully converged alternating-optimization baseline while running about 100 times faster.

0.38

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.58
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.58
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04