CS Paper Radar

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

Wenyu Huang, Alireza Javid, Nuria González-Prelcic

eess.SP ·submitted 2026-10-06 18:50 UTC · v1
code/data

Abstract

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

Comment
This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

MPSi: Neural Extraction of Site-Specific Multipath Propagation Properties for Massive MIMO

eess.SP ·2026-11-07 ·Maryam Rezvani, Raviraj Adve, Amr El-Keyi, Akram bin Sediq
similarity 0.68
Abstract · Submitted to IEEE for possible publication

Accurate extraction of site-specific multipath propagation properties enables a wide range of wireless applications, including initial access, wideband channel reconstruction, and the generation of channel datasets for learning-based and continual-learning systems. Classical parametric channel-sounding algorithms such as RIMAX provide physically interpretable estimates, but their data-dependent model-order selection and iterative nonlinear refinement introduce substantial delay and computational cost. This paper proposes MPSi, a physics-guided neural framework that replaces these costly stages with a compact path-count network and a fixed-depth, deep-unfolded Levenberg-Marquardt refinement. MPSi estimates the complex gain, angle of arrival, and propagation delay of each multipath component while preserving the underlying physical channel model. We evaluate MPSi in two site-specific ray-traced environments, a small cell and a dense urban area, and show that it achieves initial-access and full-channel-estimation performance comparable to an enhanced RIMAX baseline while requiring significantly fewer optimization iterations. The reconstructed channels also yield bit-error-rate performance close to the perfect-channel knowledge reference. These results position MPSi as a promising low-overhead framework for extracting multipath propagation properties in massive-MIMO systems and for generating cell-specific channel pseudo-labels for training when direct ground-truth measurements are unavailable.

0.31

Channel2World: A Wireless Foundation Model for RF Environment Representation

eess.SP ·2026-08-18 ·Hyung-Joo Moon, Joonkyu Jang, Kwang Soon Kim, Seong-Lyun Kim, Robert W. Heath +1 more
similarity 0.67
Abstract · 13 pages, 10 figures

Wireless channels are commonly treated as link-specific observations, although their multipath structure is governed by the surrounding radio-frequency (RF) environment. In this paper, we propose Channel2World, a wireless foundation model that learns a reusable environment-level representation from multiple-input multiple-output (MIMO) channel-position observations. The model aggregates channels collected within the same base-station-centered environment into a wireless world embedding using a Transformer-based encoder. The encoder is pretrained through context-query prediction, where context channels condition user equipment (UE) position and relative path-gain prediction for disjoint query channels. After pretraining, the encoder is frozen and used as a task-agnostic environment-conditioning module for downstream wireless models, enabling adaptation to unseen environments without site-specific fine-tuning. To learn an environment-level latent space that generalizes across deployments, we pretrain Channel2World using ray-tracing data from 26,000 environments, with approximately 5,000 channel measurements per environment. Evaluations on UE localization, beam-domain channel state information (CSI) reconstruction, and RF-observable geometry reconstruction show that the learned embeddings provide effective conditioning in unseen environments. For localization and CSI reconstruction tasks, embedding-based conditioning outperforms or remains competitive with site-specific fine-tuning, although fine-tuning requires task-specific labeled data and additional gradient-based adaptation. The embeddings also support the reconstruction of dominant reflector structures, indicating their utility as reusable environmental priors across tasks.

0.43

Do Ray-Traced Cities Make a Better Channel Prior for an Unseen Site? A Pre-Registered Study in Simulation, and a Test on Measured Channels that Reverses It

cs.LG cs.ITeess.SP ·2026-11-03 ·Krish Patel
similarity 0.66
Abstract · 11 pages, 3 figures, 3 tables

Channel estimators at a newly deployed base station usually start from 3GPP stochastic channel models, which describe no particular street. We ask whether a channel prior pooled from many ray-traced cities serves an unseen site better than the 3GPP CDL models, and whether learned estimators make the difference. With Sionna RT on 14 city scenes, LMMSE estimation from covariance priors, leave-one-city-out evaluation, and pass/fail bars written down before each main experiment, we find in simulation that the pooled prior sits about 0.6 dB from a site-trained estimator with no site measurements, about what CDL reaches after 50 measurements. Learned models added little: at most 0.65 dB in estimation, and in channel prediction a simple classical method beat CNN predictors by 1.8-12 dB from 2 ms ahead. On measured channels from the DICHASUS outdoor dataset (1.272 GHz, three 2x8 arrays on one building) the result reversed: the pooled ray-traced prior was 3.2-4.1 dB worse than CDL. The simulated channels were too clean; with users at the real distances, even a scattering level tuned from 50 site measurements left the prior about 2 dB behind CDL. A pre-registered follow-on on two more measured environments found the generic CDL prior 2.1-4.7 dB from a site-trained one: no further in a factory hall than on the street, furthest in a small lab room. Finally, a hallway model calibrated to measurements by differentiable ray tracing reproduced delay spread, but as a prior in an unmeasured part of the hallway it was 4.5 dB worse than CDL on the full array. All measured results come from one sounder.

0.33

WiNeRF: Measurement Constrained Radiance Fields for Actionable Wireless Channel Modeling

cs.NI cs.LG ·2026-08-24 ·Saif Ur Rahman, Rafid Umayer Murshed, Anton Dmitriev, Cagri Tanriover, Rahul C. Shah +1 more
published similarity 0.66
Abstract · Accepted to EWSN 2026

Wireless embedded systems increasingly rely on wireless channel information for decision making, yet practical platforms operate under severe constraints, including few antennas, narrow bandwidth, and sparse, noisy measurements. While neural field based approaches inspired by Neural Radiance Fields (NeRFs) have recently been explored for continuous wireless channel modeling, existing approaches depend on dense measurements or external priors such as known geometry, visual context, or angle-of-arrival (AoA) information, limiting their practicality in real-world deployments. We present WiNeRF, a neural field framework that learns a spatially continuous, complex-valued wireless channel representation directly from sparse channel state information (CSI) collected by commodity WiFi devices. WiNeRF embeds intrinsic system constraints, such as antenna geometry, limited spatial resolution, and phase uncertainty, as inductive biases through a 3D conical wave sampling model, a multi-resolution implicit scene representation, and a differentiable optimization framework for complex-valued channel learning. Across diverse indoor environments with non-line-of-sight (NLoS) regions, WiNeRF achieves a median prediction SNR of 5.3 dB, outperforming prior neural baselines by 4.9 dB on average (approximately 3x higher prediction SNR), and produces a task-agnostic channel representation that can be directly reused in standard signal-processing pipelines, including beamforming, AoA estimation, and RSSI coverage mapping, without modifying existing hardware or wireless protocols.

0.37

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.66
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Environment-Aware Diffusion Model for Massive MIMO-OFDM Channel Estimation

eess.SP ·2026-09-15 ·Wanchen Hu, Jie Yang, Yi Song, Jun Xia, Shuangyang Li +2 more
similarity 0.66
Abstract

This paper proposes an environment-aware diffusion based channel estimation in massive multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. The high dimensionality of massive MIMO channels combined with limited pilot resources makes accurate estimation challenging. To address this issue, we exploit the spatial variability of wireless channels by training a diffusion model to learn the location-conditioned distribution of channel state information, which provides an environment-aware prior for channel estimation. Based on this learned prior, a posterior inference algorithm is developed to incorporate pilot observations into the reverse diffusion process, enabling Bayesian channel estimation by combining the received-signal likelihood with the learned channel prior. By jointly leveraging location information and measurement data, the proposed approach improves estimation accuracy under limited pilot resources. Simulation results based on ray-tracing channel datasets demonstrate that the proposed method consistently outperforms conventional estimators and existing learning-based approaches across various signal-to-noise ratios and pilot configurations.

0.40

GIST: Location-Dependent Uplink Path Structure Transfer for FDD Downlink Channel Estimation

eess.SP ·2026-11-02 ·Jinghan Zhang, Xitao Gong, Qi Wang, Mate Boban, Giuseppe Caire
hot direction similarity 0.64
Abstract · Submitted to IEEE ICC 2027

A key challenge of downlink (DL) channel estimation in frequency division duplex (FDD) massive multiple-input multiple-output (MIMO) systems is the pilot overhead, which grows with the numbers of antennas and subcarriers. However, a prior on path delays and directions shared by the uplink (UL) and DL channels can reduce this overhead. A model trained only on UL channels measured at a base station (BS) can predict the path structure (delays, directions and power gains) from the location of a user equipment (UE) and thereby assist DL channel estimation. In this paper, we propose Gaussian-Informed Structure Transfer (GIST), in which each Gaussian primitive models one propagation path, whose delay, directions and power gain are predicted from the UE location relative to the primitive center. The complex gains of the predicted paths are estimated from DL pilots by linear minimum mean square error estimation with this prior. Experiments on a ray-traced and a measured dataset show that GIST outperforms all baselines, reaching a lower DL estimation error with fewer pilot subcarriers. Further experiments demonstrate its robustness to UE location errors, its low storage and computational requirements.

0.32

Multi-Antenna Channel Prediction in 5G and Beyond using Data driven approach

eess.SP ·2026-10-31 ·A. Sathi Babu, V. Udaya Sankar, Vishnu Ram OV
similarity 0.63
Abstract · 7 pages, 10 figures, conference

As Wireless Communication evolves towards 5G and beyond, it satisfies Quality of Service (QoS) requirements of users by utilizing beam forming, adaptive transmission and multi antenna communication techniques. It is essential to have accurate channel information at Base station (BS) to provide satisfactory QoS to users. Traditional channel estimation approach involves transmitting pilots from User Equipments (UEs) and estimating the channel at BS, increases computational complexity as it is periodic process. It also increases communication complexity as number of antennas at BS increases which leads to increase in pilots. In this paper, we consider channel vector prediction using Machine learning approach at 7GHz. In this work, we generated data using ray tracing mechanism and used this generated data to train Machine learning models. We Considered XG Boost regression and Multilayer perceptron regression model.

0.32