CS Paper Radar

Environment-Aware Diffusion Model for Massive MIMO-OFDM Channel Estimation

Wanchen Hu, Jie Yang, Yi Song, Jun Xia, Shuangyang Li, Yu Zhu, Giuseppe Caire

eess.SP ·submitted 2026-09-15 03:34 UTC · v1

Abstract

This paper proposes an environment-aware diffusion based channel estimation in massive multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. The high dimensionality of massive MIMO channels combined with limited pilot resources makes accurate estimation challenging. To address this issue, we exploit the spatial variability of wireless channels by training a diffusion model to learn the location-conditioned distribution of channel state information, which provides an environment-aware prior for channel estimation. Based on this learned prior, a posterior inference algorithm is developed to incorporate pilot observations into the reverse diffusion process, enabling Bayesian channel estimation by combining the received-signal likelihood with the learned channel prior. By jointly leveraging location information and measurement data, the proposed approach improves estimation accuracy under limited pilot resources. Simulation results based on ray-tracing channel datasets demonstrate that the proposed method consistently outperforms conventional estimators and existing learning-based approaches across various signal-to-noise ratios and pilot configurations.

Closest papers

Nearest neighbours by meaning across the whole index.

MIMO-OFDM AI Receiver Based on Incrementally Conditioned Diffusion with Soft Decision

eess.SP ·2026-09-22 ·Weijie Zhou, Zhaoyang Zhang, Zhixian Kong, Zhaohui Yang
similarity 0.71
Abstract

Conventional iterative receiver usually begins with channel estimation using sparse pilot observations and follows with data detection based on the channel estimates, and then updates channel estimation using decision feedback, and so on. In Artificial Intelligence (AI)-based receiver design, it is also crucial to make use of such progressively enriched data observations to enhance the generative channel estimation. However, the statistical characteristics and reliability of the data decisions always evolve with the channel estimation processes, which brings great challenges to the design of the overall learning framework and algorithms. In this paper, we propose \textit{Diff-Rx}, an incrementally conditioned diffusion-based receiver with co-designed data detection and channel estimation, for multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. Specifically, we develop a condition-adaptive post-training method which enables the generative channel estimator to adapt to the conditioning inputs that are progressively enriched by soft data decisions, and also to implicitly align the pilot- and data-induced channel feature spaces to mitigate potential estimation errors. The threshold-free soft decisions provide smooth condition updates without condition-specific reliability tuning. We further develop a conditional diffusion transformer that is capable of performing robust channel estimation under noisy observations and various pilot patterns while reducing the conventional multi-step diffusion generation to one single step. Simulations on both statistical and site-specific ray-tracing channels show that, Diff-Rx exhibits consistent gains across different noise levels, pilot densities and modulation schemes, and works well at a pilot density as low as 1/32 while achieving significant improvement in channel estimation and data detection performances.

0.34

JEPA-Inspired Latent Field Prediction for Sparse-Pilot MIMO-OFDM Channel Reconstruction

eess.SP cs.AI ·2026-10-27 ·Yuzhi Yang, Brahim Mefgouda, Hang Zou, Lina Bariah, Anis Bara +3 more
similarity 0.69
Abstract

Accurate acquisition of full channel state information (CSI) is essential for multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) wireless systems, while dense pilot-based estimation incurs substantial overhead. Directly minimizing the prediction error over raw CSI coefficients is fragile in realistic propagation environments, since small-scale fading, mobility, local scattering, and small spatial perturbations can induce large phase-sensitive variations. Nevertheless, wireless channels contain strong spatial, temporal, and frequency-domain correlations that can be more predictably represented in a latent propagation-field domain. Motivated by this observation, we propose a joint-embedding predictive architecture (JEPA)-inspired field world model, defined as a latent predictive model of the wireless propagation field, for sparse-pilot channel reconstruction. The model maps CSI observations into latent time-frequency tokens, predicts masked or future latent field states from historical multi-band context, and fuses the predicted latent prior with sparse noisy current pilots to reconstruct the full MIMO-OFDM channel. Ray-tracing experiments show that the proposed method improves normalized mean square error (NMSE) over pilot-only and direct reconstruction baselines, supporting latent field prediction as an effective prior for sparse-pilot channel acquisition.

0.10

FACE: Flow-Guided Angular Channel Estimation Framework for mmWave MIMO Systems

cs.LG ·2026-11-16 ·Samitha Gunarathne, Eslam Eldeeb, Nurul Huda Mahmood, Matti Latva-aho
benchmark similarity 0.68
Abstract · 14 pages, 11 figures

Acquiring accurate channel state information (CSI) is essential for millimeter-wave (mmWave) multi-input multi-output (MIMO) systems. However, it remains challenging due to high-dimensional channels, limited pilot observations, and measurement noise. To address these challenges, we propose flow-guided angular channel estimation (FACE), a novel channel estimation framework based on flow matching, an emerging generative modeling paradigm that learns continuous transport dynamics between probability distributions. FACE exploits the inherent angular-domain sparsity of mmWave channels and incorporates the learned flow matching model as a generative channel prior. Numerical results show that FACE consistently achieves higher channel estimation accuracy than both conventional estimators and diffusion-based generative estimator across diverse channel and system configurations. Moreover, FACE maintains high estimation accuracy with fewer pilot observations and achieves an average achievable rate close to the perfect-CSI benchmark. Compared with diffusion-based estimation, FACE requires substantially fewer sampling steps while achieving superior or comparable estimation accuracy, reducing inference time and computational cost. Overall, the proposed framework demonstrates the potential of flow matching for accurate, pilot-efficient, and computationally efficient mmWave MIMO channel estimation.

0.33

Joint Channel Estimation, Data Detection, and Phase Noise Tracking in Massive MIMO Systems

cs.IT ·2026-11-13 ·Toan-Van Nguyen, Duy H. N. Nguyen
similarity 0.67
Abstract

Communication over multiple-input multiple-output (MIMO) systems is degraded by phase noise (PN) arising from imperfect local oscillators, with PN becoming more severe at higher carrier frequencies. Existing methods either rely on linearized Kalman-filter approaches or apply variational Bayes (VB) only to individual stages, such as data detection under a static phase prior, or channel estimation alone, leaving no unified framework that tracks an evolving PN process consistently across pilot and data transmission. This paper develops such a framework for uplink massive MIMO. Specifically, we first propose VB-Tracking, which employs von Mises priors and coordinate-ascent VB inference to jointly estimate the channel and track the transmit and receive PN trajectories during the pilot phase without linearization. We then propose VB-Detecting for joint data detection and phase tracking by absorbing the transmit PN into a composite transmit variable. Using a sequentially propagated von Mises predictive prior, the composite variable admits an exact closed-form posterior. Finally, we propose VB-Refining, which periodically re-estimates the channel during data transmission using the soft posterior moments of reliably detected transmit symbols as virtual pilots. We show that VB-Detecting scales linearly in the number of users, receive antennas, constellation size, and iterations. Simulations against EKF-EP, EKF-ZF, and JED baselines show that VB-Tracking, VB-Detecting, and VB-Refining together achieve lower channel NMSE and symbol error rate, with the performance gap widening at high SNR and under severe PN.

0.13

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

eess.SP ·2026-10-06 ·Wenyu Huang, Alireza Javid, Nuria González-Prelcic
code/data similarity 0.66
Abstract · This work has been submitted to the IEEE for possible publication

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

0.25

Channel2World: A Wireless Foundation Model for RF Environment Representation

eess.SP ·2026-08-18 ·Hyung-Joo Moon, Joonkyu Jang, Kwang Soon Kim, Seong-Lyun Kim, Robert W. Heath +1 more
similarity 0.65
Abstract · 13 pages, 10 figures

Wireless channels are commonly treated as link-specific observations, although their multipath structure is governed by the surrounding radio-frequency (RF) environment. In this paper, we propose Channel2World, a wireless foundation model that learns a reusable environment-level representation from multiple-input multiple-output (MIMO) channel-position observations. The model aggregates channels collected within the same base-station-centered environment into a wireless world embedding using a Transformer-based encoder. The encoder is pretrained through context-query prediction, where context channels condition user equipment (UE) position and relative path-gain prediction for disjoint query channels. After pretraining, the encoder is frozen and used as a task-agnostic environment-conditioning module for downstream wireless models, enabling adaptation to unseen environments without site-specific fine-tuning. To learn an environment-level latent space that generalizes across deployments, we pretrain Channel2World using ray-tracing data from 26,000 environments, with approximately 5,000 channel measurements per environment. Evaluations on UE localization, beam-domain channel state information (CSI) reconstruction, and RF-observable geometry reconstruction show that the learned embeddings provide effective conditioning in unseen environments. For localization and CSI reconstruction tasks, embedding-based conditioning outperforms or remains competitive with site-specific fine-tuning, although fine-tuning requires task-specific labeled data and additional gradient-based adaptation. The embeddings also support the reconstruction of dominant reflector structures, indicating their utility as reusable environmental priors across tasks.

0.43

Temporal Diffusion Models for Joint Signal-Channel Estimation under Gaussian and $α$-Stable MIMO Channels

eess.SP cs.LG ·2026-11-17 ·Rawad Kansoh, Bahaa Ammoury, Charbel Hannoun, Jihad Fahs, Ibrahim Abou-Faycal
similarity 0.65
Abstract · 14 pages, 10 figures

Diffusion models have emerged as powerful tools for learning complex data distributions and solving inverse problems. However, most diffusion models rely on the Gaussian distribution, which does not accurately represent heavy-tailed data. In this work, we study diffusion-based reconstruction under Gaussian and symmetric $α$-stable fading channels, while also exploring the benefits of using possible temporal dependence in the channel. We consider two variants: pilot-based channel-only estimation and joint image-channel recovery for MIMO systems. Our approach is based on several standard and score-based diffusion models for both Gaussian and $α$-stable distributions. We refine these models by guiding the reverse diffusion process using the observation likelihood and show how a single trained diffusion model can be reused for the location-scale family of distributions without retraining. In blind MIMO recovery, separate diffusion models are used for the image and channel, and their estimates are combined through likelihood guidance. For each setting, we compare independent and temporal reconstruction, where information from previous observations is used to improve the estimation. We show that, under a time-dependent channel model, such a temporal reconstruction improves channel estimation and the quality of the reconstructed image. Finally, we show that, for the same heavy-tailed channel data, using an $α$-stable diffusion prior provides better channel estimation and image reconstruction than using a Gaussian diffusion prior.

0.31

GIST: Location-Dependent Uplink Path Structure Transfer for FDD Downlink Channel Estimation

eess.SP ·2026-11-02 ·Jinghan Zhang, Xitao Gong, Qi Wang, Mate Boban, Giuseppe Caire
hot direction similarity 0.65
Abstract · Submitted to IEEE ICC 2027

A key challenge of downlink (DL) channel estimation in frequency division duplex (FDD) massive multiple-input multiple-output (MIMO) systems is the pilot overhead, which grows with the numbers of antennas and subcarriers. However, a prior on path delays and directions shared by the uplink (UL) and DL channels can reduce this overhead. A model trained only on UL channels measured at a base station (BS) can predict the path structure (delays, directions and power gains) from the location of a user equipment (UE) and thereby assist DL channel estimation. In this paper, we propose Gaussian-Informed Structure Transfer (GIST), in which each Gaussian primitive models one propagation path, whose delay, directions and power gain are predicted from the UE location relative to the primitive center. The complex gains of the predicted paths are estimated from DL pilots by linear minimum mean square error estimation with this prior. Experiments on a ray-traced and a measured dataset show that GIST outperforms all baselines, reaching a lower DL estimation error with fewer pilot subcarriers. Further experiments demonstrate its robustness to UE location errors, its low storage and computational requirements.

0.32