CS Paper Radar

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu, Yuxiang Zhang, Jikun Du, Guangyi Liu

eess.SP ·submitted 2026-11-06 07:07 UTC · v1

Abstract

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

Comment
15 pages, 14 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.70
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.69
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

DeepTelecom: A Differentiable Multimodal Framework for Channel Twinning in Dynamic Heterogeneous Wireless Environments

cs.IT ·2026-10-10 ·Bohao Wang, Tianen Yuan, William Yen, Zehua Jiang, Chongwen Huang +10 more
similarity 0.69
Abstract

Large-scale multimodal data are a key enabler for integrating large generative artificial intelligence models into wireless networks. However, existing wireless datasets offer limited support for heterogeneous environments, particularly in terms of reusable high-fidelity scenes, scalable differentiable ray tracing, and synchronized multimodal data. These limitations are more pronounced in mobile and aerial scenarios with time-varying environments and channels. To address these limitations, we propose DeepTelecom, a material-aware, high-fidelity multimodal channel dataset and reproducible generation framework for networks involving unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces. DeepTelecom refines coarse indoor/outdoor reconstructions and uses a large language model to map segmented surfaces to frequency-dependent electromagnetic parameters, yielding material-aware Level of Detail 3 digital twins. Then, a differentiable GPU-accelerated Sionna ray tracer simulates propagation across the sub-6 GHz/millimeter-wave/sub-terahertz bands, and specifically captures rotor-induced micro-Doppler signatures of stationary or moving UAVs at different pitch angles and translational velocities. The framework synchronously produces channel tensors, coverage maps, transmission videos, multi-view images, and weather-conditioned renderings, and supports differentiable material calibration from sparse channel anchors. The released dataset contains 10 material-aware indoor/outdoor scenes and 50,000 synchronized UAV samples; the framework supports scalable generation of additional data for user-defined scenes and system configurations. In 3D UAV localization, DeepTelecom reduces the 90th-percentile error from 31.05 m to 2.43 m compared with schemes considering only channel state information, demonstrating its significance for artificial-intelligence-enabled wireless systems.

0.23

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.68
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.67
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Neural Multipath Fields for 6G FR3 Digital Twins: Latent Adaptation from Sparse Data

eess.SP ·2026-11-09 ·Srijita Sanyal, Adam Umra, Aydin Sezgin
similarity 0.67
Abstract

Wireless digital twins are essential for environment-aware 6G communications, motivating the investigation of frequency range 3 (FR3), an emerging mid-band regime offering a promising balance between bandwidth and propagation characteristics. Neural Radio Frequency (RF) fields provide continuous surrogates for site-specific radio propagation, but adapting a scene-specific field to a new environment can require substantial measurements and retraining. To this end, we propose the Latent-Adaptive Neural Multipath Field (LANMF), a scene-conditioned FR3 model that predicts path-resolved delays, complex channel impulse response (CIR) coefficients, and arrival and departure directions from transmitter-receiver coordinates. LANMF learns shared propagation representations across source environments and adapts to unseen scenes by optimizing only a 16-dimensional scene latent. Evaluated on six ray-traced indoor scenes at 7.5 GHz, latent-only adaptation yields improvements in prediction with just 5-10 target links (0.42-0.83% of available links). Compared with full-network fine-tuning, it updates only 16 persistent target parameters, reducing adaptation time by 28-30% and incremental peak GPU memory by 82-85%. While the proposed solution supports various wireless applications, we demonstrate its utility through beam-candidate reduction using a 64-beam codebook, retaining measurement-based final beam selection.

0.34

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

eess.SP ·2026-10-06 ·Wenyu Huang, Alireza Javid, Nuria González-Prelcic
code/data similarity 0.66
Abstract · This work has been submitted to the IEEE for possible publication

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

0.25

Channel-Informed Neural Network for Physical Layer Key Generation

cs.LG eess.SP ·2026-09-14 ·Jose Angel Sanchez Viloria, George Sklivanitis, Dimitris Pados, Elizabeth Serena Bentley
similarity 0.65
Abstract

Physical-layer key generation (PKG) enables wireless devices to establish shared keys from reciprocal channel observations without directly exchanging the key. This capability is attractive for edge networks, where distributed and resource-constrained devices may require lightweight key establishment with limited access to centralized infrastructure. We introduce a channel-informed neural network for PKG that derives binary key features directly from received IQ measurements while explicitly grounding the learned representation in the underlying multipath channel. The proposed multi-task recurrent neural network jointly learns reciprocity-preserving binary features and an auxiliary channel estimate using a training objective that combines deep metric learning with channel-informed supervision. Structured channel sounding enables channel estimation from over-the-air measurements, while Sionna-RT ray tracing is used to augment training with additional propagation conditions. We evaluate the framework using indoor and outdoor software-defined-radio measurements collected on the POWDER radio testbed. Across all evaluated scenarios, the proposed model produces lower bit disagreement for reciprocal Alice-Bob observations than for Eve-related observations. Ray-traced data augmentation substantially improves key diversity, increasing the unique-key rate to 0.94, 0.99, and 0.99 across the indoor and two outdoor scenarios, respectively. Successfully reconciled channel-informed keys pass the selected NIST randomness tests prior to SHA-3 privacy amplification. The results demonstrate the potential of channel-informed representation learning for decentralized wireless key establishment while highlighting an important tradeoff between key diversity and reconciliation reliability.

0.17