CS Paper Radar

Neural Multipath Fields for 6G FR3 Digital Twins: Latent Adaptation from Sparse Data

Srijita Sanyal, Adam Umra, Aydin Sezgin

eess.SP ·submitted 2026-11-09 13:50 UTC · v1

Abstract

Wireless digital twins are essential for environment-aware 6G communications, motivating the investigation of frequency range 3 (FR3), an emerging mid-band regime offering a promising balance between bandwidth and propagation characteristics. Neural Radio Frequency (RF) fields provide continuous surrogates for site-specific radio propagation, but adapting a scene-specific field to a new environment can require substantial measurements and retraining. To this end, we propose the Latent-Adaptive Neural Multipath Field (LANMF), a scene-conditioned FR3 model that predicts path-resolved delays, complex channel impulse response (CIR) coefficients, and arrival and departure directions from transmitter-receiver coordinates. LANMF learns shared propagation representations across source environments and adapts to unseen scenes by optimizing only a 16-dimensional scene latent. Evaluated on six ray-traced indoor scenes at 7.5 GHz, latent-only adaptation yields improvements in prediction with just 5-10 target links (0.42-0.83% of available links). Compared with full-network fine-tuning, it updates only 16 persistent target parameters, reducing adaptation time by 28-30% and incremental peak GPU memory by 82-85%. While the proposed solution supports various wireless applications, we demonstrate its utility through beam-candidate reduction using a 64-beam codebook, retaining measurement-based final beam selection.

Closest papers

Nearest neighbours by meaning across the whole index.

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.67
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.65
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.65
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.64
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

cs.LG cs.IT ·2026-09-01 ·Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han
similarity 0.63
Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

0.21

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.63
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.46

CoRF: Cross-Scene RF Synthesis by Learning Propagation and Preserving Array Physics

cs.NI ·2026-09-28 ·Kang Yang, Duaa Nakshbandi, Wan Du, Mani Srivastava
similarity 0.61
Abstract

Existing radio-frequency (RF) neural fields fit each scene separately, making new-scene deployment measurement- and optimization-intensive. This work studies amortized cross-scene spatial spectrum synthesis, where a shared model learns propagation across scenes and instantiates an unseen scene from sparse target-scene measurements without scene-specific training. To achieve this, CoRF separates learned scene-dependent propagation from the known receiver-array observation model. An unordered set of spectrum-only references conditions a canonical anchor field, producing arrival directions and query-dependent component powers for each query. Analytic array physics maps these components to the receiver covariance and then to the spatial spectrum. This factorization keeps the pretrained propagation model frozen, enabling synthesis at arbitrary query locations after a single reference-conditioning pass. A necessary local reference-capacity bound and an error decomposition further characterize the formulation. Across 35 simulated scenes spanning seven categories, CoRF outperforms the strongest baseline by 7.09 dB PSNR on unseen variants of represented scene categories and by 6.97 dB on entirely unseen scene categories.

0.47

DeepTelecom: A Differentiable Multimodal Framework for Channel Twinning in Dynamic Heterogeneous Wireless Environments

cs.IT ·2026-10-10 ·Bohao Wang, Tianen Yuan, William Yen, Zehua Jiang, Chongwen Huang +10 more
similarity 0.61
Abstract

Large-scale multimodal data are a key enabler for integrating large generative artificial intelligence models into wireless networks. However, existing wireless datasets offer limited support for heterogeneous environments, particularly in terms of reusable high-fidelity scenes, scalable differentiable ray tracing, and synchronized multimodal data. These limitations are more pronounced in mobile and aerial scenarios with time-varying environments and channels. To address these limitations, we propose DeepTelecom, a material-aware, high-fidelity multimodal channel dataset and reproducible generation framework for networks involving unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces. DeepTelecom refines coarse indoor/outdoor reconstructions and uses a large language model to map segmented surfaces to frequency-dependent electromagnetic parameters, yielding material-aware Level of Detail 3 digital twins. Then, a differentiable GPU-accelerated Sionna ray tracer simulates propagation across the sub-6 GHz/millimeter-wave/sub-terahertz bands, and specifically captures rotor-induced micro-Doppler signatures of stationary or moving UAVs at different pitch angles and translational velocities. The framework synchronously produces channel tensors, coverage maps, transmission videos, multi-view images, and weather-conditioned renderings, and supports differentiable material calibration from sparse channel anchors. The released dataset contains 10 material-aware indoor/outdoor scenes and 50,000 synchronized UAV samples; the framework supports scalable generation of additional data for user-defined scenes and system configurations. In 3D UAV localization, DeepTelecom reduces the 90th-percentile error from 31.05 m to 2.43 m compared with schemes considering only channel state information, demonstrating its significance for artificial-intelligence-enabled wireless systems.

0.23