CS Paper Radar

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han

cs.LG cs.IT ·submitted 2026-09-01 17:01 UTC · v1

Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

Closest papers

Nearest neighbours by meaning across the whole index.

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.65
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25

Digital Twin Networks for 6G Wireless Systems: Architecture, Enabling Technologies, AI-Driven Control, and Open Challenges

eess.SY ·2026-08-12 ·Charalampos Oikonomidis, Emmanouel T. Michailidis, Demosthenes Vouyioukas, Nikolaos I. Miridakis
survey similarity 0.65
Abstract

The transition to the Sixth Generation (6G) of mobile networks requires proactive and deterministic orchestration to satisfy the stringent key performance indicators of future services, including ultra-reliable low-latency communications, enhanced mobile broadband, and massive machine-type communications. Digital Twin Networks (DTNs) have emerged as a foundational technology to meet these demands, offering real-time and high-fidelity virtual replicas of the physical network. Although the literature explores DTNs conceptually, a gap exists in the coverage of technical classification and computational feasibility evaluations. This survey addresses this gap by formally categorizing state-of-the-art DTN architectures into passive monitoring twins and active control twins. We evaluate their enabling technologies, namely ray-tracing, reconfigurable intelligent surfaces, artificial intelligence, and multi-access edge computing. Importantly, we analyze the complexity of ten state-of-the-art frameworks, five reporting complexity expressions, four derived in this survey, and one not derivable, to assess hardware scalability and inference bottlenecks. These architectures are then linked to forthcoming 6G use cases, including smart cities, Industry 5.0, healthcare, and smart grids. Finally, we synthesize crucial unresolved challenges, highlighting graphics processing unit hardware limitations, cyber-physical actuation latency, and the need for a zero-trust security paradigm, offering research directions toward the unified Internet of Everything.

0.04

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.64
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Tutorial on Closed-Loop and Application-Aware Digital Twins for Future Wireless Networks

cs.NI ·2026-10-10 ·Yuchen Liu, Sara Garcia Sanchez, Mingzhe Chen, Xingqin Lin, Berk Canberk +1 more
surveyhot direction similarity 0.64
Abstract

To support emerging applications such as extended reality, autonomous systems, and large-scale cyber-physical infrastructures, next-generation wireless networks must evolve beyond traditional communication paradigms toward tightly integrated and closed-loop systems. Digital Twin Networks (DTNs) have recently emerged as a key enabler of this transformation by bridging the physical and digital worlds through real-time, bidirectional interactions and adaptive control mechanisms. In this tutorial, we provide a comprehensive overview of DTN design and optimization across multiple system dimensions. Specifically, we first introduce the fundamental design principles of DTN creation, including high-fidelity twin modeling, telemetry integration, and cyber-physical synchronization. We then present resource optimization and semantic-driven DTNs, where application-aware objectives and semantic abstractions guide efficient data processing, communication, and decision-making. Subsequently, we explore physical-layer optimization techniques for DTNs, emphasizing joint sensing, communication, and adaptive wireless resource control. Furthermore, we examine DTN-guided network management and feedback optimization, focusing on closed-loop learning, real-time control, and reinforcement-driven adaptation between digital twins and physical networks. Finally, we review ongoing standardization efforts and enabling tools that support the practical deployment of DTNs in real-world systems. This tutorial aims to provide a unified perspective on DTNs as an emerging paradigm for application-aware, AI-native, and closed-loop wireless systems, and to highlight key challenges and future research directions in this rapidly evolving field.

0.24

Neural Multipath Fields for 6G FR3 Digital Twins: Latent Adaptation from Sparse Data

eess.SP ·2026-11-09 ·Srijita Sanyal, Adam Umra, Aydin Sezgin
similarity 0.63
Abstract

Wireless digital twins are essential for environment-aware 6G communications, motivating the investigation of frequency range 3 (FR3), an emerging mid-band regime offering a promising balance between bandwidth and propagation characteristics. Neural Radio Frequency (RF) fields provide continuous surrogates for site-specific radio propagation, but adapting a scene-specific field to a new environment can require substantial measurements and retraining. To this end, we propose the Latent-Adaptive Neural Multipath Field (LANMF), a scene-conditioned FR3 model that predicts path-resolved delays, complex channel impulse response (CIR) coefficients, and arrival and departure directions from transmitter-receiver coordinates. LANMF learns shared propagation representations across source environments and adapts to unseen scenes by optimizing only a 16-dimensional scene latent. Evaluated on six ray-traced indoor scenes at 7.5 GHz, latent-only adaptation yields improvements in prediction with just 5-10 target links (0.42-0.83% of available links). Compared with full-network fine-tuning, it updates only 16 persistent target parameters, reducing adaptation time by 28-30% and incremental peak GPU memory by 82-85%. While the proposed solution supports various wireless applications, we demonstrate its utility through beam-candidate reduction using a 64-beam codebook, retaining measurement-based final beam selection.

0.34

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.61
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29

ST-NDT: A Topological Framework for Reducing Communication Overhead in Network Digital Twins

cs.NI cs.ET ·2026-08-15 ·John Sengendo, Fabrizio Granelli
published similarity 0.60
Abstract · Accepted at 17th International Conference on Network of the Future NoF 2026

Next-generation networks (NGN) are becoming increasingly complex, especially with the increasing size of topologies. To manage this complexity requires the adoption of frameworks that enable real-time monitoring, optimization, and ``what-if'' case scenario analysis. Network Digital Twins (NDTs) have emerged as a key enabler technology for supporting these capabilities because of their ability to provide digital replicas of physical networks operations, enabling scenario testing without interfering with the live network. Although NDTs are considered a key enabler technology, maintaining continuous synchronization with the Physical Twin (PT) introduces considerable communication overhead and excessive bandwidth utilization, limiting sustainability in resource-constrained networks. This paper proposes a topological signal processing framework for sparse network monitoring in NDTs. We represent network edge flows as signals defined on a cell complex, and exploit the Hodge spectral structure of the graph to identify a minimal set of maximally informative sensor edges, thereby reducing the measurement overhead between the physical network and its digital twin replica. Results show that the proposed Sparse Topological Network Digital Twin (ST-NDT) framework consistently outperforms all four baseline frameworks across most of the edge monitoring budgets. For example, at a 20\% monitoring budget (48 of 243 edges monitored), ST-NDT achieves improvements of 10.85\%, 11.24\%, 7.36\%, and 6.15\% over degree-based, core-number, betweenness centrality, and random-selection frameworks, respectively.

0.19

Hybrid Ray-Tracing and Physics-Embedded Neural Modeling for High-Fidelity Channel Reconstruction in Wireless Digital Twins

cs.NI ·2026-10-04 ·Huiwen Zhang, Chu Ma, Feng Ye
similarity 0.59
Abstract · Submitted to an IEEE transaction

Many existing wireless digital twins (DTs) rely heavily on ray-tracing (RT)-based channel simulators to achieve scalability in large-scale environments. However, the geometric-optics (GO) approximations underlying RT become inaccurate in propagation regimes dominated by diffraction and refraction, which are prevalent at sub-6 GHz carrier frequencies. This paper presents a hybrid RT and physics-embedded physics-informed neural network (PE-PINN) framework that enhances site-specific wireless DTs with physics-consistent full-wave accuracy. Building on prior PE-PINN work, we introduce targeted architectural extensions, including a finite-length edge diffraction kernel and a lossy dielectric formulation based on complex wavenumbers, to accurately model electromagnetic wave interactions with realistic objects and materials. To balance accuracy and efficiency, we further propose a localized tunnel strategy that deploys PE-PINN models only along dominant propagation paths, selectively replacing or augmenting RT predictions in regions where GO assumptions break down. Comprehensive evaluations against full-wave COMSOL simulations demonstrate that the proposed framework closely matches reference solutions and significantly outperforms RT-only approaches in diffraction- and refraction-dominated scenarios. We further demonstrate seamless integration of the proposed approach into a realistic indoor wireless DT, highlighting its practicality and scalability for next-generation wireless network design.

0.28