CS Paper Radar

Digital Twin Networks for 6G Wireless Systems: Architecture, Enabling Technologies, AI-Driven Control, and Open Challenges

Charalampos Oikonomidis, Emmanouel T. Michailidis, Demosthenes Vouyioukas, Nikolaos I. Miridakis

eess.SY ·submitted 2026-08-12 17:07 UTC · v2
survey

Abstract

The transition to the Sixth Generation (6G) of mobile networks requires proactive and deterministic orchestration to satisfy the stringent key performance indicators of future services, including ultra-reliable low-latency communications, enhanced mobile broadband, and massive machine-type communications. Digital Twin Networks (DTNs) have emerged as a foundational technology to meet these demands, offering real-time and high-fidelity virtual replicas of the physical network. Although the literature explores DTNs conceptually, a gap exists in the coverage of technical classification and computational feasibility evaluations. This survey addresses this gap by formally categorizing state-of-the-art DTN architectures into passive monitoring twins and active control twins. We evaluate their enabling technologies, namely ray-tracing, reconfigurable intelligent surfaces, artificial intelligence, and multi-access edge computing. Importantly, we analyze the complexity of ten state-of-the-art frameworks, five reporting complexity expressions, four derived in this survey, and one not derivable, to assess hardware scalability and inference bottlenecks. These architectures are then linked to forthcoming 6G use cases, including smart cities, Industry 5.0, healthcare, and smart grids. Finally, we synthesize crucial unresolved challenges, highlighting graphics processing unit hardware limitations, cyber-physical actuation latency, and the need for a zero-trust security paradigm, offering research directions toward the unified Internet of Everything.

Closest papers

Nearest neighbours by meaning across the whole index.

Tutorial on Closed-Loop and Application-Aware Digital Twins for Future Wireless Networks

cs.NI ·2026-10-10 ·Yuchen Liu, Sara Garcia Sanchez, Mingzhe Chen, Xingqin Lin, Berk Canberk +1 more
surveyhot direction similarity 0.74
Abstract

To support emerging applications such as extended reality, autonomous systems, and large-scale cyber-physical infrastructures, next-generation wireless networks must evolve beyond traditional communication paradigms toward tightly integrated and closed-loop systems. Digital Twin Networks (DTNs) have recently emerged as a key enabler of this transformation by bridging the physical and digital worlds through real-time, bidirectional interactions and adaptive control mechanisms. In this tutorial, we provide a comprehensive overview of DTN design and optimization across multiple system dimensions. Specifically, we first introduce the fundamental design principles of DTN creation, including high-fidelity twin modeling, telemetry integration, and cyber-physical synchronization. We then present resource optimization and semantic-driven DTNs, where application-aware objectives and semantic abstractions guide efficient data processing, communication, and decision-making. Subsequently, we explore physical-layer optimization techniques for DTNs, emphasizing joint sensing, communication, and adaptive wireless resource control. Furthermore, we examine DTN-guided network management and feedback optimization, focusing on closed-loop learning, real-time control, and reinforcement-driven adaptation between digital twins and physical networks. Finally, we review ongoing standardization efforts and enabling tools that support the practical deployment of DTNs in real-world systems. This tutorial aims to provide a unified perspective on DTNs as an emerging paradigm for application-aware, AI-native, and closed-loop wireless systems, and to highlight key challenges and future research directions in this rapidly evolving field.

0.24

ST-NDT: A Topological Framework for Reducing Communication Overhead in Network Digital Twins

cs.NI cs.ET ·2026-08-15 ·John Sengendo, Fabrizio Granelli
published similarity 0.70
Abstract · Accepted at 17th International Conference on Network of the Future NoF 2026

Next-generation networks (NGN) are becoming increasingly complex, especially with the increasing size of topologies. To manage this complexity requires the adoption of frameworks that enable real-time monitoring, optimization, and ``what-if'' case scenario analysis. Network Digital Twins (NDTs) have emerged as a key enabler technology for supporting these capabilities because of their ability to provide digital replicas of physical networks operations, enabling scenario testing without interfering with the live network. Although NDTs are considered a key enabler technology, maintaining continuous synchronization with the Physical Twin (PT) introduces considerable communication overhead and excessive bandwidth utilization, limiting sustainability in resource-constrained networks. This paper proposes a topological signal processing framework for sparse network monitoring in NDTs. We represent network edge flows as signals defined on a cell complex, and exploit the Hodge spectral structure of the graph to identify a minimal set of maximally informative sensor edges, thereby reducing the measurement overhead between the physical network and its digital twin replica. Results show that the proposed Sparse Topological Network Digital Twin (ST-NDT) framework consistently outperforms all four baseline frameworks across most of the edge monitoring budgets. For example, at a 20\% monitoring budget (48 of 243 edges monitored), ST-NDT achieves improvements of 10.85\%, 11.24\%, 7.36\%, and 6.15\% over degree-based, core-number, betweenness centrality, and random-selection frameworks, respectively.

0.19

Digital Twin for Pre-Deployment Validation of AI-Driven Safety-Critical Industrial Edge Control Loops

cs.NI cs.RO ·2026-10-08 ·Sara Cavallero, Federico Tonini, Tony Chahoud, Giampaolo Cuozzo, Davide Borsatti +3 more
similarity 0.66
Abstract · submitted to journal publication

Industrial environments are increasingly characterized by the tight interaction among physical processes, communication infrastructures, and intelligent applications. In this context, Digital Twins (DTs) have emerged as a key technology for system analysis and optimization. However, existing DT solutions typically focus either on industrial processes or communication networks, while lacking an integrated and application-aware perspective. To fill this gap, this paper proposes a modular DT framework for industrial environments that jointly models physical processes, wireless communications, and application logic within a unified architecture. The feasibility of the proposed framework is experimentally validated through a real-world Proof-of-Concept (PoC) implemented in the BI-REX pilot line, involving a 5G-connected Autonomous Mobile Robot (AMR) transporting hazardous liquids and remotely controlled by an AI-driven application. The proposed DT is used to reproduce the behaviour of the real deployment and to investigate the impact of different placements of the AI application, including on-premise, edge, and remote cloud execution scenarios. Experimental results demonstrate a close agreement between DT predictions and PoC measurements in terms of both network-level metrics, such as Reference Signal Received Power (RSRP) and latency, and end- to-end application metrics, including application-level Round- Trip-Time (RTT). Moreover, the analysis shows how inaccuracies of network modeling can critically affect the feasibility of latency-sensitive industrial control loops, highlighting the potential of integrated DTs as tools for the pre-deployment design and validation of next-generation industrial systems.

0.32

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

cs.LG cs.IT ·2026-09-01 ·Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han
similarity 0.65
Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

0.21

Optical Network Digital Twin: From Digital Coherent Transmission to Intelligent Network Operations

eess.SY ·2026-11-05 ·Hideki Nishizawa, Enrico Miotto, Andrea Rosso, Takahito Tanimura, Zehao Wang +18 more
survey similarity 0.65
Abstract

Optical Network Digital Twins (ONDTs) are emerging as a key framework for representing, synchronizing, and utilizing the physical state of optical networks for quality-of-transmission (QoT) estimation, optimization, and intelligent operation. This survey provides a comprehensive view of ONDTs, spanning digital coherent transmission and physical-layer observability to intelligent network operations. We systematically organize ONDT technologies from ecosystem, functional, control, and implementation architecture perspectives and review the enabling technologies required to construct, synchronize, and utilize digital representations of physical optical networks. As a unifying framework to describe both ONDT design and validation, we introduce a categorization based on the following figures of merit: Fidelity, Dynamicity, and Deployability (FDD). In particular, we emphasize fit-for-purpose Fidelity, where modeling effort focuses on the physical effects of components rather than solely maximizing model accuracy, favoring scalability and generalizability. Furthermore, experimental and field validations are examined to evaluate the practical applicability of ONDT technologies. We further examine experimental and field validations, from physics-based QoT estimation and measurement-informed model refinement to field synchronization, service provisioning, multi-domain observability, and infrastructure characterization. Finally, we discuss the complementary roles of ONDTs and AI agents toward autonomous optical networks and identify key research directions for practical deployment.

0.33

ONDT: A Modular and Virtualized O-RAN Digital Twin for xApp/rApp Closed-Loop Experimentatio

cs.NI ·2026-10-06 ·Miguel Catalan-Cid, Joan Josep Aleixendri, August Betzler, George Oikonomou, Lydia Ntzogani +1 more
published similarity 0.64
Abstract

Open Radio Access Network (O-RAN) architectures extend programmability in next-generation cellular networks through Near-Real-Time and Non-Real-Time RAN Intelligent Controllers (RICs), enabling AI/ML-driven xApps and rApps to optimize network behavior dynamically. However, validating automated closed-loop control algorithms in live environments presents significant operational risks and deployment costs. To address this challenge, this paper introduces the O-RAN Digital Twin (ONDT), a modular, virtualized, and cloud-native experimentation framework developed as a 6G enabler within the SNS SUNRISE-6G project. We present the ONDT architecture and its end-to-end experimentation workflows, showing how the framework automates O-RAN-compliant rApp/xApp onboarding, RAN scenario configuration and initialization, Key Performance Metric (KPM) collection, and closed-loop control validation. Experimental validation using Juniper RIC platforms and the Keysight RICtest emulation framework demonstrates ONDT ability to provide an isolated and reproducible environment for KPM monitoring, cell ON/OFF control, automated dataset generation, and rApp/xApp validation.

0.35

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.63
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25

Darpan: A Digital Twin Framework for the Next-Generation Computing Continuum

cs.DC ·2026-09-30 ·Zhiyu Wang, Rajkumar Buyya
similarity 0.62
Abstract

Computing-continuum applications distribute work across devices, edge systems, fog resources, and clouds. While a placement, scheduling, or recovery decision is being made, resource availability, network conditions, and application progress may change, so the decision can be invalid by the time it is executed. Existing runtimes enact predetermined decisions, whereas simulation tools compare alternatives in preconfigured environments; neither explores alternative outcomes directly from the current state of a running application. We propose a Digital Twin framework, called Darpan, that supports both physical and digital execution: the physical side runs real applications and continuously observes their runtime state, while the digital side maintains a continuously updated, executable virtual counterpart based on these physical observations. Darpan evaluates candidate decisions independently from the same starting point and returns the selected decision to the physical side, where its feasibility is validated against the latest physical state before actual execution. Across real Directed Acyclic Graph (DAG) workloads, Darpan predicts physical response time with a mean absolute error of 0.485 s and retains 93.1% scale-out efficiency at 40 nodes. In the state-change trials, Darpan takes about 2 ms on average from state capture to rejection of an invalidated decision, stopping the request before data transfer and avoiding unnecessary physical execution overhead. Under the same physical-DAG budget, Darpan-generated experience enables a weaker Proximal Policy Optimization (PPO) scheduler to outperform two state-of-the-art Deep Reinforcement Learning (DRL) schedulers by 29.1% and 20.2%.

0.25