CS Paper Radar

ST-NDT: A Topological Framework for Reducing Communication Overhead in Network Digital Twins

John Sengendo, Fabrizio Granelli

cs.NI cs.ET ·submitted 2026-08-15 18:22 UTC · v1
published

Abstract

Next-generation networks (NGN) are becoming increasingly complex, especially with the increasing size of topologies. To manage this complexity requires the adoption of frameworks that enable real-time monitoring, optimization, and ``what-if'' case scenario analysis. Network Digital Twins (NDTs) have emerged as a key enabler technology for supporting these capabilities because of their ability to provide digital replicas of physical networks operations, enabling scenario testing without interfering with the live network. Although NDTs are considered a key enabler technology, maintaining continuous synchronization with the Physical Twin (PT) introduces considerable communication overhead and excessive bandwidth utilization, limiting sustainability in resource-constrained networks. This paper proposes a topological signal processing framework for sparse network monitoring in NDTs. We represent network edge flows as signals defined on a cell complex, and exploit the Hodge spectral structure of the graph to identify a minimal set of maximally informative sensor edges, thereby reducing the measurement overhead between the physical network and its digital twin replica. Results show that the proposed Sparse Topological Network Digital Twin (ST-NDT) framework consistently outperforms all four baseline frameworks across most of the edge monitoring budgets. For example, at a 20\% monitoring budget (48 of 243 edges monitored), ST-NDT achieves improvements of 10.85\%, 11.24\%, 7.36\%, and 6.15\% over degree-based, core-number, betweenness centrality, and random-selection frameworks, respectively.

Comment
Accepted at 17th International Conference on Network of the Future NoF 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Digital Twin Networks for 6G Wireless Systems: Architecture, Enabling Technologies, AI-Driven Control, and Open Challenges

eess.SY ·2026-08-12 ·Charalampos Oikonomidis, Emmanouel T. Michailidis, Demosthenes Vouyioukas, Nikolaos I. Miridakis
survey similarity 0.70
Abstract

The transition to the Sixth Generation (6G) of mobile networks requires proactive and deterministic orchestration to satisfy the stringent key performance indicators of future services, including ultra-reliable low-latency communications, enhanced mobile broadband, and massive machine-type communications. Digital Twin Networks (DTNs) have emerged as a foundational technology to meet these demands, offering real-time and high-fidelity virtual replicas of the physical network. Although the literature explores DTNs conceptually, a gap exists in the coverage of technical classification and computational feasibility evaluations. This survey addresses this gap by formally categorizing state-of-the-art DTN architectures into passive monitoring twins and active control twins. We evaluate their enabling technologies, namely ray-tracing, reconfigurable intelligent surfaces, artificial intelligence, and multi-access edge computing. Importantly, we analyze the complexity of ten state-of-the-art frameworks, five reporting complexity expressions, four derived in this survey, and one not derivable, to assess hardware scalability and inference bottlenecks. These architectures are then linked to forthcoming 6G use cases, including smart cities, Industry 5.0, healthcare, and smart grids. Finally, we synthesize crucial unresolved challenges, highlighting graphics processing unit hardware limitations, cyber-physical actuation latency, and the need for a zero-trust security paradigm, offering research directions toward the unified Internet of Everything.

0.04

Toward Composable Network Digital Twins: A Subgraph-Based Latency Prediction Study

cs.NI cs.LG ·2026-09-16 ·Shenjia Ding, David Flynn, Paul Harvey, Takamichi Miyata, Sumiko Miyata
similarity 0.68
Abstract

Modern networks must support changing topologies, configurations, and performance objectives, motivating fast and reliable performance estimation. Network digital twins (NDTs) enable what-if analysis for performance estimation in such network scenarios, however, existing machine learning-based NDT approaches often rely on entire topology representations, which are inherently monolithic and lack reusability under topological or traffic changes in the network. This paper introduces a composable NDT approach that decomposes networks into subgraphs represented by reusable unit twins that capture subgraph structure, configuration and traffic behaviours. A lightweight composer aggregates unit twin combinations to create NDTs that predict per-route end-to-end latency through an overall topology. Evaluation across controlled synthetic topologies and diverse traffic scenarios, real-world Topology Zoo topologies, and a public NDT challenge dataset demonstrates that the composable NDTs achieve high in-distribution accuracy while remaining stable under out-of-distribution scenarios. Comparison with monolithic full topology NDTs demonstrates that our composable approach achieves reusability, while achieving comparable or superior accuracy.

0.19

Tutorial on Closed-Loop and Application-Aware Digital Twins for Future Wireless Networks

cs.NI ·2026-10-10 ·Yuchen Liu, Sara Garcia Sanchez, Mingzhe Chen, Xingqin Lin, Berk Canberk +1 more
surveyhot direction similarity 0.66
Abstract

To support emerging applications such as extended reality, autonomous systems, and large-scale cyber-physical infrastructures, next-generation wireless networks must evolve beyond traditional communication paradigms toward tightly integrated and closed-loop systems. Digital Twin Networks (DTNs) have recently emerged as a key enabler of this transformation by bridging the physical and digital worlds through real-time, bidirectional interactions and adaptive control mechanisms. In this tutorial, we provide a comprehensive overview of DTN design and optimization across multiple system dimensions. Specifically, we first introduce the fundamental design principles of DTN creation, including high-fidelity twin modeling, telemetry integration, and cyber-physical synchronization. We then present resource optimization and semantic-driven DTNs, where application-aware objectives and semantic abstractions guide efficient data processing, communication, and decision-making. Subsequently, we explore physical-layer optimization techniques for DTNs, emphasizing joint sensing, communication, and adaptive wireless resource control. Furthermore, we examine DTN-guided network management and feedback optimization, focusing on closed-loop learning, real-time control, and reinforcement-driven adaptation between digital twins and physical networks. Finally, we review ongoing standardization efforts and enabling tools that support the practical deployment of DTNs in real-world systems. This tutorial aims to provide a unified perspective on DTNs as an emerging paradigm for application-aware, AI-native, and closed-loop wireless systems, and to highlight key challenges and future research directions in this rapidly evolving field.

0.24

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

cs.LG cs.IT ·2026-09-01 ·Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han
similarity 0.60
Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

0.21

Optical Network Digital Twin: From Digital Coherent Transmission to Intelligent Network Operations

eess.SY ·2026-11-05 ·Hideki Nishizawa, Enrico Miotto, Andrea Rosso, Takahito Tanimura, Zehao Wang +18 more
survey similarity 0.59
Abstract

Optical Network Digital Twins (ONDTs) are emerging as a key framework for representing, synchronizing, and utilizing the physical state of optical networks for quality-of-transmission (QoT) estimation, optimization, and intelligent operation. This survey provides a comprehensive view of ONDTs, spanning digital coherent transmission and physical-layer observability to intelligent network operations. We systematically organize ONDT technologies from ecosystem, functional, control, and implementation architecture perspectives and review the enabling technologies required to construct, synchronize, and utilize digital representations of physical optical networks. As a unifying framework to describe both ONDT design and validation, we introduce a categorization based on the following figures of merit: Fidelity, Dynamicity, and Deployability (FDD). In particular, we emphasize fit-for-purpose Fidelity, where modeling effort focuses on the physical effects of components rather than solely maximizing model accuracy, favoring scalability and generalizability. Furthermore, experimental and field validations are examined to evaluate the practical applicability of ONDT technologies. We further examine experimental and field validations, from physics-based QoT estimation and measurement-informed model refinement to field synchronization, service provisioning, multi-domain observability, and infrastructure characterization. Finally, we discuss the complementary roles of ONDTs and AI agents toward autonomous optical networks and identify key research directions for practical deployment.

0.33

Semantic Edge-Cloud Communication for Real-Time Urban Traffic Digital Twins

cs.NI cs.CVcs.DCeess.SP ·2026-10-09 ·Murat Arda Onsu, Arman Dogru, Poonam Lohan, Burak Kantarci, Aisha Syed
published similarity 0.59
Abstract · 6 pages, 4 figures, accepted to IEEE Global Communications (Globecom) Conference, 2026

Urban traffic systems are becoming increasingly complex, demanding real-time traffic perception, proactive collision prediction, and intelligent management to improve safety and reduce congestion. Although AI-driven traffic management has shown strong promise, its success relies on diverse, high-quality data spanning critical scenarios such as collisions, near-collisions, and traffic rule violations. Digital twins offer a powerful solution by enabling synchronized virtual replicas of physical traffic environments for real-time monitoring, collision prediction, traffic-flow optimization, and diverse realistic scenario generation. However, continuously synchronizing a high-fidelity urban traffic digital twin through edge surveillance cameras requires substantial edge-cloud communication, and transmitting raw video streams leads to severe bandwidth and latency constraints. To overcome this challenge, this paper proposes a semantic communication-based edge-cloud framework for real-time urban traffic digital twin applications. By leveraging edge intelligence to extract and transmit only task-relevant semantic traffic information instead of full video feeds, the proposed framework significantly reduces communication overhead while preserving the essential dynamics needed for accurate real-time digital twin reconstruction. Experimental results demonstrate more than 99% transmission savings and an average trajectory reconstruction error of only 0.12 m, confirming the proposed framework as an effective, scalable, and low-latency solution for AI-enabled urban traffic digital twin applications.

0.43

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.56
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29

Digital Twin Satellite Networks: A Paradigm for Intelligent, Efficient, and Resilient Operations

cs.NI eess.SY ·2026-08-13 ·Mustafa Alhassan, Peng Hu
similarity 0.56
Abstract · Submitted to IEEE Aerospace and Electronic Systems Magazine on April 13, 2026

Satellite mega-constellations in Low Earth Orbit (LEO) are becoming an important part of next-generation non-terrestrial networks, but their operation remains challenging because of fast network topology variation, intermittent inter-satellite links, hardware disturbances, and strict Size, Weight, and Power (SWaP) constraints. Existing approaches based on Digital Twin (DT), Digital Twin Network (DTN), Software-Defined Networking (SDN), and Open Radio Access Network (O-RAN) provide useful building blocks for intelligent satellite networking, but they do not fully support real-time, predictive, and platform-aware network operation. In this paper, we propose a Digital Twin Satellite Network (DTSN) framework as a closed-loop architecture for reliable and intelligent management of LEO satellite constellations. The proposed framework connects the physical satellite network with a synchronized virtual twin and combines real-time telemetry, Integrated Sensing and Communication (ISAC), predictive intelligence, and resilience-oriented control. To validate the concept, we develop a constellation-scale cross-domain co-simulation using the NASA 42 spacecraft simulator and a Python-based DT bridge for a LEO constellation. The DT continuously ingests physical telemetry to manage a multi-domain threat environment, encompassing kinematic drift, hardware failures, and adversarial jamming over a 600-second flight window. By leveraging a predictive lookahead mechanism and an exponential sensor recovery model, the framework successfully isolates compromised nodes and triggers proactive network reconfiguration, thereby ensuring uninterrupted service and dynamic network resilience. These results show the potential of DTSN to support predictive and resilience-oriented satellite network operations.

0.38