CS Paper Radar

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau

cs.NI ·submitted 2026-09-28 17:13 UTC · v1

Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.63
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

cs.LG cs.IT ·2026-09-01 ·Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han
similarity 0.61
Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

0.21

Digital Twin-Assisted Fast Beam Alignment for mmWave MIMO Networks

cs.IT cs.LGcs.NI ·2026-10-31 ·Muhammad Kamran Saeed, Ashfaq Khokhar
hot direction similarity 0.60
Abstract

Millimeter-wave (mmWave) communication relies on directional beam sweeping for initial access, which incurs substantial latency and signaling overhead as antenna arrays grow large and deployments become denser. Machine-learning-based beam prediction can reduce this overhead, but its effectiveness depends on training data that accurately reflects the deployment environment, a requirement that is difficult to meet in practice. This paper presents a latency-aware beam management architecture that integrates digital-twin-assisted prediction, regionbased localization, weighted ensemble learning, and explainability-driven beam pruning into a unified framework. A digital twin (DT) generates site-specific ray-traced channel knowledge offline, enabling environment-aware beam prediction without exhaustive real-world measurements and supporting both initial access and beam tracking. The proposed ensemble learning scheme combines a base classifier and a specialist classifier through reliability-weighted fusion to improve prediction accuracy and robustness, while explainable artificial intelligence (XAI)-based attribution pruning reduces the beam codebook to a small subset of the most informative beams for beam allocation. To capture the distributional mismatch between the DT and real-world environments: the network was trained on imperfect digital-twin data but evaluated on real-world surrobase data. Results show that the proposed method achieves 96.80% top-1 and 98.36% top-3 beam prediction accuracy, while reducing over-the-air sounding overhead by nearly an order of magnitude relative to exhaustive sweeping, outperforming convolutional and deep neural network baselines from prior work.

0.34

Digital Twin Networks for 6G Wireless Systems: Architecture, Enabling Technologies, AI-Driven Control, and Open Challenges

eess.SY ·2026-08-12 ·Charalampos Oikonomidis, Emmanouel T. Michailidis, Demosthenes Vouyioukas, Nikolaos I. Miridakis
survey similarity 0.60
Abstract

The transition to the Sixth Generation (6G) of mobile networks requires proactive and deterministic orchestration to satisfy the stringent key performance indicators of future services, including ultra-reliable low-latency communications, enhanced mobile broadband, and massive machine-type communications. Digital Twin Networks (DTNs) have emerged as a foundational technology to meet these demands, offering real-time and high-fidelity virtual replicas of the physical network. Although the literature explores DTNs conceptually, a gap exists in the coverage of technical classification and computational feasibility evaluations. This survey addresses this gap by formally categorizing state-of-the-art DTN architectures into passive monitoring twins and active control twins. We evaluate their enabling technologies, namely ray-tracing, reconfigurable intelligent surfaces, artificial intelligence, and multi-access edge computing. Importantly, we analyze the complexity of ten state-of-the-art frameworks, five reporting complexity expressions, four derived in this survey, and one not derivable, to assess hardware scalability and inference bottlenecks. These architectures are then linked to forthcoming 6G use cases, including smart cities, Industry 5.0, healthcare, and smart grids. Finally, we synthesize crucial unresolved challenges, highlighting graphics processing unit hardware limitations, cyber-physical actuation latency, and the need for a zero-trust security paradigm, offering research directions toward the unified Internet of Everything.

0.04

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.59
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Hybrid Ray-Tracing and Physics-Embedded Neural Modeling for High-Fidelity Channel Reconstruction in Wireless Digital Twins

cs.NI ·2026-10-04 ·Huiwen Zhang, Chu Ma, Feng Ye
similarity 0.59
Abstract · Submitted to an IEEE transaction

Many existing wireless digital twins (DTs) rely heavily on ray-tracing (RT)-based channel simulators to achieve scalability in large-scale environments. However, the geometric-optics (GO) approximations underlying RT become inaccurate in propagation regimes dominated by diffraction and refraction, which are prevalent at sub-6 GHz carrier frequencies. This paper presents a hybrid RT and physics-embedded physics-informed neural network (PE-PINN) framework that enhances site-specific wireless DTs with physics-consistent full-wave accuracy. Building on prior PE-PINN work, we introduce targeted architectural extensions, including a finite-length edge diffraction kernel and a lossy dielectric formulation based on complex wavenumbers, to accurately model electromagnetic wave interactions with realistic objects and materials. To balance accuracy and efficiency, we further propose a localized tunnel strategy that deploys PE-PINN models only along dominant propagation paths, selectively replacing or augmenting RT predictions in regions where GO assumptions break down. Comprehensive evaluations against full-wave COMSOL simulations demonstrate that the proposed framework closely matches reference solutions and significantly outperforms RT-only approaches in diffraction- and refraction-dominated scenarios. We further demonstrate seamless integration of the proposed approach into a realistic indoor wireless DT, highlighting its practicality and scalability for next-generation wireless network design.

0.28

HalifaxDT: A Wireless Digital Twin from Open Geospatial Data

cs.NI ·2026-09-05 ·Alexis Delplace, Xinyi Li, Samer Lahoud, Nur Zincir-Heywood
similarity 0.59
Abstract

Wireless digital twins can support site-specific analysis, planning, and experimentation for future wireless networks. However, constructing them at city scale remains challenging when accurate 3D city models are unavailable. This paper presents HalifaxDT, a wireless digital twin of the Halifax Peninsula in Nova Scotia, Canada, constructed from heterogeneous open geospatial and spectrum data. HalifaxDT combines building footprints, LiDAR elevation products, building metadata, and spectrum licensing records through a workflow that reconciles multiple sources of building-height information while preserving the provenance of geometry decisions. The resulting terrain, buildings, and gateway metadata are integrated into Sionna RT for wireless simulation. We evaluate HalifaxDT through two use cases. The first compares its coverage predictions with a reference derived from field measurements and with an analytical baseline. The second uses the digital twin to predict the received signal under normal operating conditions and detect interference. The coverage results show that HalifaxDT better preserves the spatial structure of the measured radio map than the analytical baseline. The interference study shows that deviations from the predicted reference can reveal interference that is difficult to detect from received power alone. We also identify current fidelity limitations, including simplified material representation, missing vegetation, and the need for broader RF calibration and synchronization with live measurements.

0.33

Digital Twin-Aided Prescreening for User Scheduling in MU-MIMO Downlink Systems

eess.SP ·2026-08-11 ·Namhyun Kim, Mahmoud Saad Abouamer, Jeonghun Park, Petar Popovski, Ahmed Alkhateeb
similarity 0.58
Abstract · 13 pages, 8 figures

In dense deployments, massive multi-user multiple-input multiple-output (MU-MIMO) base stations can acquire instantaneous channel state information (CSI) for only a limited subset of users per scheduling interval, restricting multiuser diversity. We therefore propose Digital Twin User pre-Screening (DiTUS), a digital-twin (DT)-aided framework that identifies promising users before instantaneous CSI acquisition. DiTUS forms spatial covariances from DT-inferred departure angles and path powers. Optional Gaussian-process (GP) calibration mitigates path-power bias, while the dominant rank-r eigenspace of the aggregate covariance yields common reference beams. It prescreens the pool using DiTUS-P, a low-complexity projection-energy rule, or DiTUS-L, a greedy log-determinant rule that promotes spatial compatibility. A two-level protocol collects scalar beam reports from shortlisted users and requests r-dimensional effective-channel vectors only from the scheduled set. The framework also supports proportional-fair scheduling. At 15 dB under DT imperfections, simulations with 128 candidates, a 64-user effective-CSI acquisition budget, and a 64-user shortlist show that DiTUS-L achieves 35.06 +/- 0.49 bps/Hz versus 30.28 +/- 0.60 bps/Hz for semi-orthogonal user selection (SUS) with full-dimensional CSI from 64 users, demonstrating that DT-based prescreening preserves substantial multiuser-diversity gains by identifying strong, spatially compatible users before acquiring effective-channel vectors.

0.10