CS Paper Radar

Digital Twin-Aided Prescreening for User Scheduling in MU-MIMO Downlink Systems

Namhyun Kim, Mahmoud Saad Abouamer, Jeonghun Park, Petar Popovski, Ahmed Alkhateeb

eess.SP ·submitted 2026-08-11 01:43 UTC · v1

Abstract

In dense deployments, massive multi-user multiple-input multiple-output (MU-MIMO) base stations can acquire instantaneous channel state information (CSI) for only a limited subset of users per scheduling interval, restricting multiuser diversity. We therefore propose Digital Twin User pre-Screening (DiTUS), a digital-twin (DT)-aided framework that identifies promising users before instantaneous CSI acquisition. DiTUS forms spatial covariances from DT-inferred departure angles and path powers. Optional Gaussian-process (GP) calibration mitigates path-power bias, while the dominant rank-r eigenspace of the aggregate covariance yields common reference beams. It prescreens the pool using DiTUS-P, a low-complexity projection-energy rule, or DiTUS-L, a greedy log-determinant rule that promotes spatial compatibility. A two-level protocol collects scalar beam reports from shortlisted users and requests r-dimensional effective-channel vectors only from the scheduled set. The framework also supports proportional-fair scheduling. At 15 dB under DT imperfections, simulations with 128 candidates, a 64-user effective-CSI acquisition budget, and a 64-user shortlist show that DiTUS-L achieves 35.06 +/- 0.49 bps/Hz versus 30.28 +/- 0.60 bps/Hz for semi-orthogonal user selection (SUS) with full-dimensional CSI from 64 users, demonstrating that DT-based prescreening preserves substantial multiuser-diversity gains by identifying strong, spatially compatible users before acquiring effective-channel vectors.

Comment
13 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.64
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25

GIST: Location-Dependent Uplink Path Structure Transfer for FDD Downlink Channel Estimation

eess.SP ·2026-11-02 ·Jinghan Zhang, Xitao Gong, Qi Wang, Mate Boban, Giuseppe Caire
hot direction similarity 0.60
Abstract · Submitted to IEEE ICC 2027

A key challenge of downlink (DL) channel estimation in frequency division duplex (FDD) massive multiple-input multiple-output (MIMO) systems is the pilot overhead, which grows with the numbers of antennas and subcarriers. However, a prior on path delays and directions shared by the uplink (UL) and DL channels can reduce this overhead. A model trained only on UL channels measured at a base station (BS) can predict the path structure (delays, directions and power gains) from the location of a user equipment (UE) and thereby assist DL channel estimation. In this paper, we propose Gaussian-Informed Structure Transfer (GIST), in which each Gaussian primitive models one propagation path, whose delay, directions and power gain are predicted from the UE location relative to the primitive center. The complex gains of the predicted paths are estimated from DL pilots by linear minimum mean square error estimation with this prior. Experiments on a ray-traced and a measured dataset show that GIST outperforms all baselines, reaching a lower DL estimation error with fewer pilot subcarriers. Further experiments demonstrate its robustness to UE location errors, its low storage and computational requirements.

0.32

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.60
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.60
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Performance Analysis and Sensing-Aware Resource Allocation for Full-Duplex Massive MIMO ISCC Networks

cs.IT ·2026-10-06 ·Vo Phi Son, Van-Dinh Nguyen, Nhan Thanh Nguyen, Tuan-Vu Truong, Symeon Shatzinotas
similarity 0.59
Abstract · 13 pages

Emerging edge applications must sense their environment and process data within tight latency budgets. Full-duplex (FD) integrated sensing, communication, and computing (ISCC) supports these functions concurrently, but radar probing interferes with uplink reception while user transmissions degrade target estimation. These coupled effects call for joint sensing and offloading decisions. We investigate a FD massive multiple-input multiple-output (mMIMO) ISCC network in which users partially offload tasks to an edge server while an access point probes a target. For zero-forcing uplink reception with imperfect channel estimates, we derive a tractable rate bound and target-angle Cramer-Rao lower bounds (CRLBs) under the stated interference and beam-alignment assumptions. We then jointly optimize offloading fractions, user and radar transmit powers, and edge computing resources to minimize average end-to-end task latency subject to sensing-accuracy, communication-rate, energy, deadline, and resource constraints. A successive convex approximation algorithm is developed to efficiently address the resulting nonconvex problem. The analysis shows that larger arrays improve sensing and uplink performance, but residual radar interference creates a finite rate ceiling when user powers scale down with array size. Simulation results show joint allocation reduces radar transmit power by approximately 86% relative to equal communication-user power at a -40 dB CRLB threshold and lowers latency compared with fixed-allocation and half-duplex schemes.

0.11

Study of Multiuser Scheduling Based on User Satisfaction for MU-MIMO Systems

cs.IT ·2026-08-15 ·Ahmed M. Nor, Lukas T. N. Landau, E. Veronica Belmega, Rodrigo C. de Lamare
similarity 0.58
Abstract · 3 figures, 6 pages

Scheduling in multiuser multiple input multiple output (MU-MIMO) systems is essential for efficient resource allocation and overall performance enhancement. In this work, a multiuser scheduling problem is formulated to maximize the product of user equipments' (UEs) aggregate satisfactions, which maintains user fairness. Solving such a combinatorial problem using exhaustive search (EX), which requires evaluating all possible multiuser groups within a massive number of resource blocks (RBs), is prohibitive. Instead, we propose an efficient users' satisfaction based scheduling approach (US-SA). In our US-SA, a low dimension sub-grouping matrix is constructed {at each frame}, which is used to schedule the best multiuser group in each time slot; satisfied users are eliminated from the scheduling process. Our US-SA performs close to the optimal EX method in terms of satisfaction, transmitted data amount, spectral efficiency, latency, and fairness with lower computational cost. Moreover, our experiments demonstrate that the proposed scheme outperforms competing techniques.

0.07

Geometry-Aided Channel Deduction with Partial Channel Estimates and Uncalibrated Digital Twin

eess.SP cs.LG ·2026-09-29 ·Hongning Ruan, Zhaoyang Zhang, Zirui Chen, Ziqing Xing, Zhaohui Yang +1 more
similarity 0.58
Abstract

The acquisition of high-dimensional channel state information (CSI) in wireless MIMO-OFDM communications usually requires high pilot overhead, or relies on accurate and complete positional or environmental information. In this paper, we propose a geometry-aided channel deduction (GCD) approach, which utilizes an uncalibrated digital twin (DT) with only approximate environmental geometry and positions to assist the channel acquisition. The key rationale behind is that, even imprecise geometric information, which can be easily obtained in advance through radio sensing technologies or existing geographic databases, provides certain structural features about the current channel; meanwhile, the coarse instantaneous channel estimates using only a small amount of pilots provide dedicated information that aligns with the channel structure and further compensates for the geometry inaccuracy and other channel unknowns. To this end, we first extract geometric features from the DT, which contain only simple structural information of the channel. Then we propose random prompt augmentation, a novel method to generate an appropriate prompt that converts geometric multi-path structure into a CSI-like representation while suppressing the disturbance of other unknown channel parameters. The prompt is then fused with the pilot-based instantaneous channel estimate via a channel deduction network. To further enhance the network's versatility, we incorporate pilot configurations into the existing learning architecture to support variable pilot patterns. Comprehensive experiments validate the superiority of the proposed method, which demonstrates high channel acquisition quality, low pilot overhead, and strong robustness. Furthermore, the structural prompt also serves as scenario-related context, enabling our approach to generalize well in new scenarios.

0.43

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.58
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29