CS Paper Radar

Geometry-Aided Channel Deduction with Partial Channel Estimates and Uncalibrated Digital Twin

Hongning Ruan, Zhaoyang Zhang, Zirui Chen, Ziqing Xing, Zhaohui Yang, Mérouane Debbah

eess.SP cs.LG ·submitted 2026-09-29 11:19 UTC · v1

Abstract

The acquisition of high-dimensional channel state information (CSI) in wireless MIMO-OFDM communications usually requires high pilot overhead, or relies on accurate and complete positional or environmental information. In this paper, we propose a geometry-aided channel deduction (GCD) approach, which utilizes an uncalibrated digital twin (DT) with only approximate environmental geometry and positions to assist the channel acquisition. The key rationale behind is that, even imprecise geometric information, which can be easily obtained in advance through radio sensing technologies or existing geographic databases, provides certain structural features about the current channel; meanwhile, the coarse instantaneous channel estimates using only a small amount of pilots provide dedicated information that aligns with the channel structure and further compensates for the geometry inaccuracy and other channel unknowns. To this end, we first extract geometric features from the DT, which contain only simple structural information of the channel. Then we propose random prompt augmentation, a novel method to generate an appropriate prompt that converts geometric multi-path structure into a CSI-like representation while suppressing the disturbance of other unknown channel parameters. The prompt is then fused with the pilot-based instantaneous channel estimate via a channel deduction network. To further enhance the network's versatility, we incorporate pilot configurations into the existing learning architecture to support variable pilot patterns. Comprehensive experiments validate the superiority of the proposed method, which demonstrates high channel acquisition quality, low pilot overhead, and strong robustness. Furthermore, the structural prompt also serves as scenario-related context, enabling our approach to generalize well in new scenarios.

Closest papers

Nearest neighbours by meaning across the whole index.

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.63
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.62
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.46

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

eess.SP ·2026-10-06 ·Wenyu Huang, Alireza Javid, Nuria González-Prelcic
code/data similarity 0.61
Abstract · This work has been submitted to the IEEE for possible publication

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

0.25

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.60
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

Cross-Domain Channel Estimation for MU-MIMO-OFDM

cs.IT ·2026-11-05 ·Mingcheng Nie, Shuangyang Li, Ruoxi Chong, Giuseppe Caire, Yonghui Li
similarity 0.59
Abstract

Conventional channel estimation for multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) relies on the pilot interpolation without explicitly identifying the sparse delay-angle (DA) components. To exploit DA sparsity while maintaining backward compatibility with existing MIMO-OFDM systems, we propose a cross-domain channel estimation scheme for multiuser MIMO-OFDM (MU-MIMO-OFDM) systems. The scheme exploits the circular convolution structure in the DA domain to identify candidate DA pairs by correlating delay-domain observations with DA pilot responses. These pairs and the known pilots then define a time-frequency (TF) dictionary for refining the DA coefficients from TF observations through least-squares or sparsity-regularized fitting. The refined coefficients and candidate pairs reconstruct the aggregate channel across antennas and subcarriers aligning with the geometric channel model. Numerical results show approximately 10 dB and 7 dB lower normalized mean-square error than the conventional OFDM estimation schemes for integer and fractional delay and angle indices, respectively.

0.10

Multiuser Channel Estimation in FIM Systems: A Structured Block Term Decomposition Approach

eess.SP ·2026-10-21 ·Xi Han, Junqiao Chen, André L. F. de Almeida, George C. Alexandropoulos
similarity 0.59
Abstract

Flexible intelligent metasurfaces (FIMs) create geometry-dependent array responses that provide spatial diversity but complicate multiuser channel estimation. This paper studies uplink estimation using pilot observations collected under multiple prescribed and calibrated morphing configurations. Each user contributes a matrix--vector block that couples its diagonal reference-array response with its morphing-dependent phases, while its third-mode vector is the known pilot scaled by the complex channel gain. We develop a pilot-constrained structured block term decomposition (BTD) estimator whose alternating least-squares updates exploit both the known pilot directions and the diagonal spatial factors. The undeformed configuration sets the columnwise scaling convention, and a unit first-entry normalization assigns the remaining block scale to the channel gain. Matching the recovered factors to the calibrated spatial--morphing manifold then yields the physical angles and configuration-dependent channels. We characterize the rank conditions for unique conditional least-squares updates, distinguish these conditions from global factor and physical-angle identifiability, and summarize the training, coherence-time, and computational requirements. Simulations show accurate two-dimensional angle and channel recovery in the tested settings, equal total pilot-symbol overhead in rigid-panel comparisons, improved steering-vector estimates as morphing diversity increases, and degradation as user loading or pilot correlation increases.

0.22

Environment-Aware Diffusion Model for Massive MIMO-OFDM Channel Estimation

eess.SP ·2026-09-15 ·Wanchen Hu, Jie Yang, Yi Song, Jun Xia, Shuangyang Li +2 more
similarity 0.59
Abstract

This paper proposes an environment-aware diffusion based channel estimation in massive multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems. The high dimensionality of massive MIMO channels combined with limited pilot resources makes accurate estimation challenging. To address this issue, we exploit the spatial variability of wireless channels by training a diffusion model to learn the location-conditioned distribution of channel state information, which provides an environment-aware prior for channel estimation. Based on this learned prior, a posterior inference algorithm is developed to incorporate pilot observations into the reverse diffusion process, enabling Bayesian channel estimation by combining the received-signal likelihood with the learned channel prior. By jointly leveraging location information and measurement data, the proposed approach improves estimation accuracy under limited pilot resources. Simulation results based on ray-tracing channel datasets demonstrate that the proposed method consistently outperforms conventional estimators and existing learning-based approaches across various signal-to-noise ratios and pilot configurations.

0.39

Prior-Aided Masked Vector Quantization CSI Feedback for FDD Massive MIMO Systems

cs.IT ·2026-09-15 ·Yi Song, Tianyu Yang, Kangda Zhi, Shuangyang Li, Giuseppe Caire
similarity 0.58
Abstract

Downlink channel state information (CSI) feedback is a key bottleneck in frequency-division duplex (FDD) massive MIMO systems, as the user equipment (UE) must convey its estimated channel to the base station (BS) over a limited uplink (UL) budget. To improve CSI reconstruction accuracy under tight feedback constraints, we propose prior-aided masked vector quantization (PM-VQ), a learning-based separate source--channel coding (SSCC) feedback scheme conditioned on the average angle--delay power map---a compact representation of the channel second-order statistics available at both the UE and the BS. In PM-VQ, a prior-aided encoder maps the CSI to latent tokens, and a spatially-adaptive masking module (SAMM) scores and selects the most informative tokens within the feedback budget. The selected tokens are vector-quantized and fed back together with their positions, while an adaptive de-masking module (ADM) completes the latent representation at the BS before prior-conditioned decoding. To support variable-rate compression, a single model is trained over a range of selected-token counts, enabling operation across multiple feedback dimensions without retraining. We evaluate PM-VQ against three representative baselines on a Sionna-generated 3GPP TR~38.901 UMa dataset, focusing on the most challenging diffuse regime where channel energy is spread across many angle--delay coefficients. Simulation results show that PM-VQ achieves the lowest NMSE across all tested SNR levels and feedback dimensions in this regime. Moreover, the angle--delay power-map prior remains beneficial even when estimated from only a few channel realizations.

0.29