CS Paper Radar

HalifaxDT: A Wireless Digital Twin from Open Geospatial Data

Alexis Delplace, Xinyi Li, Samer Lahoud, Nur Zincir-Heywood

cs.NI ·submitted 2026-09-05 01:07 UTC · v1

Abstract

Wireless digital twins can support site-specific analysis, planning, and experimentation for future wireless networks. However, constructing them at city scale remains challenging when accurate 3D city models are unavailable. This paper presents HalifaxDT, a wireless digital twin of the Halifax Peninsula in Nova Scotia, Canada, constructed from heterogeneous open geospatial and spectrum data. HalifaxDT combines building footprints, LiDAR elevation products, building metadata, and spectrum licensing records through a workflow that reconciles multiple sources of building-height information while preserving the provenance of geometry decisions. The resulting terrain, buildings, and gateway metadata are integrated into Sionna RT for wireless simulation. We evaluate HalifaxDT through two use cases. The first compares its coverage predictions with a reference derived from field measurements and with an analytical baseline. The second uses the digital twin to predict the received signal under normal operating conditions and detect interference. The coverage results show that HalifaxDT better preserves the spatial structure of the measured radio map than the analytical baseline. The interference study shows that deviations from the predicted reference can reveal interference that is difficult to detect from received power alone. We also identify current fidelity limitations, including simplified material representation, missing vegetation, and the need for broader RF calibration and synchronization with live measurements.

Closest papers

Nearest neighbours by meaning across the whole index.

KODAMA: Multimodal Digital Twin Reconstruction for Urban RF Propagation Modelling

cs.CV ·2026-09-07 ·Maximiliano Wardle, A. Ryo Koblitz
similarity 0.74
Abstract

3D reconstruction typically strives for geometric fidelity or visual plausibility. Radio frequency digital twins (RFDT) are instead judged by whether communication channels behave in them as they do in the real world. RFDTs promise site-specific channel prediction but current practice forces a choice between coarse automated scenes and hand-built, measurement-calibrated models that take weeks to construct per-site. We present KODAMA, an automated pipeline that reconstructs ray tracing-ready RFDTs at city scale from off-the-shelf geospatial data alone: aerial imagery, LiDAR, and photogrammetry yield terrain and watertight building meshes, while exposure-weighted multi-view fusion of street-level imagery recovers façade relief, electromagnetic materials, and clutter---all without site visits or calibration. Across three sites spanning 3.6 to 28 GHz, KODAMA's uncalibrated predictions achieve single-digit RMSE, reducing point-to-point error by up to 5.35 dB over automated baselines and coming within 0.22 dB of a measurement-calibrated, hand-built RFDT.

0.10

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
published similarity 0.71
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.33

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.66
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.59
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.59
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

UrbanEMF: City-Scale EMF Mapping over a Continuous Urban Area with Real-World Base-Station Deployment

eess.SP ·2026-10-01 ·Shuangning Li, Chenxin Luo, Shanshan Wang, Yarui Zhang, Paul Lagouanelle +1 more
benchmarkdatasetcode/data similarity 0.58
Abstract

Electromagnetic Fields (EMF) mapping is essential for wireless propagation modeling and are fundamental to a wide range of applications, including spectrum awareness, network planning, and integrated sensing and communication (ISAC). However, existing datasets are often limited to spatially separated 2D scenes without real base station (BS) information. To address this gap, we present UrbanEMF, a city-scale EMF mapping dataset constructed from real world urban geometry and physical BS deployments using ray tracing. Unlike conventional single scene-based datasets, UrbanEMF preserves continuous city-scale urban coverage and realistic transmitter location information. It further extends traditional 2D maps by incorporating multiple receiver heights. In addition, both aggregated received signal strength (RSS) maps and path loss maps are provided to characterize complementary aspects of the radio environment. This work provides a realistic and flexible benchmark for developing and evaluating learning-based methods in large-scale urban wireless environments. The code for this work is available at: https://github.com/lemonstudy/UrbanEMF

0.53

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.58
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

GNSS Anomaly Detection in Urban Canyons: A Comprehensive Survey of Multimodal Visibility Inference

eess.SP ·2026-10-25 ·Abdelgabar Ahmed, Tarig Ballal, Nour Kouzayha, Tareq Y. Al-Naffouri
publishedsurvey similarity 0.57
Abstract · Accepted for publication in IEEE Aerospace and Electronic Systems Magazine. DOI: 10.1109/MAES.2026.3746915

Reliable GNSS positioning in dense urban environments depends on assessing satellite visibility and identifying measurements degraded by non-line-of-sight (NLOS) reception and multipath. This survey organizes reception-state inference into three complementary evidence families: receiver-side signals, 3D maps and environmental models, and auxiliary sensors. Receiver-side approaches span antenna/electromagnetic, tracking/baseband, and observable-domain evidence, interpreted through rule-based, statistical, machine-learning, and deep-learning methods. Map-based approaches are examined by reviewing environmental representations and methods such as geometric screening, shadow matching, 3D ray tracing, and neural implicit visibility prediction. IMU, camera, and LiDAR measurements provide complementary kinematic, visual, and geometric evidence for online screening. Across these families, we compare accuracy, interpretability, hardware and calibration requirements, map dependence, computational cost, and suitability for real-time deployment. We identify open challenges in dataset quality and labeling, domain generalization, map freshness, and resource-efficient implementation. The resulting synthesis connects signal processing, environmental modeling, and sensor fusion to guide the design of robust urban GNSS measurement-screening systems.

0.26