CS Paper Radar

GNSS Anomaly Detection in Urban Canyons: A Comprehensive Survey of Multimodal Visibility Inference

Abdelgabar Ahmed, Tarig Ballal, Nour Kouzayha, Tareq Y. Al-Naffouri

eess.SP ·submitted 2026-10-25 17:39 UTC · v1
publishedsurvey

Abstract

Reliable GNSS positioning in dense urban environments depends on assessing satellite visibility and identifying measurements degraded by non-line-of-sight (NLOS) reception and multipath. This survey organizes reception-state inference into three complementary evidence families: receiver-side signals, 3D maps and environmental models, and auxiliary sensors. Receiver-side approaches span antenna/electromagnetic, tracking/baseband, and observable-domain evidence, interpreted through rule-based, statistical, machine-learning, and deep-learning methods. Map-based approaches are examined by reviewing environmental representations and methods such as geometric screening, shadow matching, 3D ray tracing, and neural implicit visibility prediction. IMU, camera, and LiDAR measurements provide complementary kinematic, visual, and geometric evidence for online screening. Across these families, we compare accuracy, interpretability, hardware and calibration requirements, map dependence, computational cost, and suitability for real-time deployment. We identify open challenges in dataset quality and labeling, domain generalization, map freshness, and resource-efficient implementation. The resulting synthesis connects signal processing, environmental modeling, and sensor fusion to guide the design of robust urban GNSS measurement-screening systems.

Comment
Accepted for publication in IEEE Aerospace and Electronic Systems Magazine. DOI: 10.1109/MAES.2026.3746915
DOI
10.1109/MAES.2026.3746915

Closest papers

Nearest neighbours by meaning across the whole index.

Point-Supervised Visual Learning for GNSS Measurement Quality Assessment

eess.SP ·2026-10-10 ·Weiwei Zhai, Penggao Yan, Liang Wang, Li-Ta Hsu
similarity 0.64
Abstract

Multipath and non-line-of-sight (NLOS) propagation degrade global navigation satellite system (GNSS) positioning accuracy in urban environments. Although fisheye sky segmentation identifies obstructions along satellite directions, binary visibility does not fully characterize observation quality. This study proposes a point-supervised visual framework that predicts GNSS observation faults from fisheye images using supervision derived from GNSS observations. During offline labeling, a vision-assisted differential GNSS procedure selects multiple reference satellites based on sky visibility and elevation constraints. Double-difference pseudorange residuals automatically generate fault labels and sample importance weights at satellite projection locations. A residual-weighted loss is computed only at valid labeled points, enabling learning from sparse supervision without manual pixelwise fault annotations. The trained network generates dense fault probability maps, which are sampled at satellite projection locations to weight observations in weighted least squares positioning, reducing the influence of potentially faulty observations. The framework is evaluated using U-Net, DeepLabv3+, DINOv3, and SAM3 on urban vehicle data collected on a different day from the training data. All four models reduce horizontal root mean square error (RMSE) by 29.51% to 36.07% compared with SAM binary sky segmentation, with U-Net achieving the lowest RMSE of 0.78 m. The framework also provides positioning solutions during some intervals when the segmentation baseline fails. These results demonstrate the framework's generalization ability and show that GNSS-derived point supervision enables fisheye images to provide observation quality information beyond binary sky visibility, supporting GNSS fault detection.

0.32

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.63
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

Vision-based Sensing of Urban Environment using Hardware-Software co-design at Scale

eess.SY cs.CV ·2026-10-31 ·Akshit Gupta, R Venkatesha Prasad
similarity 0.63
Abstract · IEEE World Forum for Internet of Things 2026

Urban environmental monitoring is crucial for climate-adaptive cities, yet current approaches rely heavily on human inspection, overhead remote sensing, or limited terrestrial RGB imagery, thereby lacking comprehensive multispectral perspectives at street level. To bridge this gap, this paper introduces UrbanScapes, an adaptable and flexible hardware-software co-design platform for large-scale, vision-based sensing of urban environments. Built on a modular architecture, UrbanScapes seamlessly integrates multispectral imaging channels, including Red, Green, Blue (RGB), Near-Infrared, and Thermal, to capture multispectral street-level imagery. The system is designed for both opportunistic deployment on bicycles, vehicles, or pedestrians and targeted deployments on municipal fleets, ensuring high spatio-temporal scalability without requiring hardware redesigns. Crucially, the platform utilizes on-device deep learning models to automatically remove personally identifiable information (PII) at the edge, addressing privacy concerns inherent in street-level data collection. By combining this multispectral street-level imagery with overhead multispectral remote sensing imagery, UrbanScapes enables scalable calculation of physics-based environmental indices, providing a foundational tool for advanced citywide analysis.

0.32

Robust 3DMA GNSS Positioning in Urban Areas Using Conservative Candidate Set Determination Based on GNSS Shadow and Reflection

eess.SP ·2026-10-31 ·Sanghyun Kim, Jiwon Seo
similarity 0.61
Abstract · Submitted to IEEE NAVICON 2026

In urban environments, global navigation satellite system (GNSS) positioning is often degraded by signal blockage and reflection caused by surrounding buildings. To address this problem, various three-dimensional mapping-aided (3DMA) GNSS techniques have been proposed. Among them, zonotope shadow and reflection matching (ZSRM) has demonstrated effective positioning performance by determining the candidate receiver position set using predicted GNSS shadow and reflection regions. However, ZSRM remains vulnerable to satellite signal misclassification, which may lead to positioning failure. To address this limitation, this paper proposes a conservative candidate set determination strategy for robust ZSRM positioning. Instead of using only the most probable signal reception condition from an artificial intelligence (AI)-based classifier, the proposed method combines the candidate regions associated with the two most probable classes. This allows the candidate receiver position set to be determined more conservatively, reducing the risk of positioning failure under signal misclassification. The proposed method was evaluated using real-world urban GNSS data. Experimental results show that the proposed method improved the positioning success rate to 100% for RF, GBDT, and SVM classifiers, compared with 8.2%-30.1% for the existing ZSRM algorithm using individual classifier outputs and 96.6% for ZSRM with unanimous voting. Although the proposed method increased the position bounds by retaining additional candidate regions, it produced smaller position bounds than ZSRM with unanimous voting. These results demonstrate that the proposed method substantially enhances the robustness of ZSRM under satellite signal misclassification in urban GNSS environments.

0.28

Beam-Wise Statistical Background Subtraction for Static Roadside LiDAR: A Cross-Sensor Benchmark Study

cs.CV cs.RO ·2026-08-14 ·Alexander Baumann, Marcel Vosshans, Thao Dang
publishedbenchmarkdatasetcode/data similarity 0.60
Abstract · Accepted for publication at the 2026 IEEE 29th International Conference on Intelligent Transportation Systems (ITSC), Naples, Italy, Septemb…

Background subtraction is a key preprocessing step for infrastructure-based LiDAR perception, enabling efficient isolation of dynamic traffic participants without semantic annotations. However, systematic cross-sensor evaluations and reproducible studies for static roadside LiDAR are missing. This paper presents a comparative benchmark of beam-wise statistical background subtraction for statically mounted LiDAR sensors. We formulate background estimation as a per-beam temporal modeling problem and investigate complementary statistical strategies that capture dominant as well as multi-modal background structures, combined with spatial filtering in the angular and 3D domain. To enable reproducible evaluation, we introduce HighwayScene, a new multi-LiDAR dataset recorded in a static roadside setup, and extend the public CoopScenes dataset with static/dynamic point-wise annotations. Across multiple scenes and heterogeneous sensing technologies, we demonstrate that beam-wise statistical modeling provides a robust and transferable solution. Combining lightweight per-beam models with spatial consistency filtering substantially improves precision while maintaining high recall and real-time capability. All datasets, annotations, and implementations are publicly released.

0.35

How Much Sensing is Enough? Landslide Detection from Sparse and Noisy 3D Observations

eess.SP ·2026-10-26 ·Arijit Pal, Abhijit Mohanty, Dipanjyoti Paul, Sandip Chakraborty, Basabdatta Palit
similarity 0.60
Abstract

Dense 3D terrain information is critical for accurate landslide detection; however, acquiring such data at large scale is often limited by sensing infrastructure, coverage, and environmental conditions. Emerging sensing modalities (e.g., mmWave, low-cost radar, sparse LiDAR) can operate under adverse conditions, but inherently produce sparse and noisy 3D observations, raising an important question: \emph{how much sensing is sufficient for reliable landslide detection?} Given the absence of large-scale sparse-terrain datasets, we have constructed a physics-informed dataset by combining digital elevation models from OpenTopography with soil moisture data from NASA's SMAP. Subsequently, we have randomly generated landslide events and introduced controlled sparsification and stochastic noise to emulate sensing constraints. We have then developed a learning-based framework to reconstruct the underlying terrain and identify landslide-prone regions using a CNN + XGBoost method. Our results show that with only 20\% of the original observations, the proposed method achieves a detection accuracy of 80\% and a ROC-AUC of 0.868, with a reconstruction error (L2 Chamfer Distance) of 99.67~$m^2$ on the test set. We have further studied the impact of sparsity, highlighting the trade-off between sensing density and detection performance.

0.21

CommDreamer: Radio-Geometric World Models for Mapless Cellular-Connected UAV Trajectory Planning

cs.RO eess.SY ·2026-11-18 ·Yuqi Ping, Tianhao Liang, Tingting Zhang
code/data similarity 0.60
Abstract

Reliable cellular connectivity and collision-free flight are essential for unmanned aerial vehicle (UAV) operations in low-altitude urban canyons, where dense 3D buildings obstruct flight clearance, shadow serving base stations, and create strong co-channel interference at street intersections. Existing planners either require prior 3D city meshes and channel knowledge maps unavailable onboard, or rely on model-free reinforcement learning with low sample efficiency and poor cross-city generalization. We propose CommDreamer, a mapless radio-geometric world model that fuses raw onboard 3D LiDAR scans, multicell cellular reports, and shift-invariant relative kinematics to jointly infer local obstacle clearance and directional signal-to-interference-plus-noise ratio (SINR) dynamics. Using a categorical recurrent state-space model, CommDreamer compresses multimodal measurement histories into a coordinate-invariant latent belief, enabling the UAV to foresee deep shadow zones and train a lightweight online policy purely via multi-step latent imagination without prior maps or antenna patterns. Zero-shot evaluations across unseen urban morphologies in our open-source ray-tracing simulator, AeroCity-RT, show that CommDreamer converges within 150 episodes where model-free reinforcement learning fails to complete flights, achieving 100.0% mission success with zero collisions while lifting median route SINR to 8.02 dB and cutting effective SINR outage by over 50% relative to radio-blind world-model and reactive LiDAR baselines.

0.35

GNetSS: Towards Learning GNSS Corrections without Ground Truth

cs.RO ·2026-11-19 ·JiaXu Chee, Simon Denman, Fahira Afzal Maken, Qingqing Cheng, Amir Khodabandeh +1 more
similarity 0.60
Abstract · 14 pages, 7 figures, Submitted to NAVIGATION, Journal of the Institute of Navigation. See navi.ion.org

We present GNetSS, a self-supervised GNSS position correction framework that improves the robustness of single point positioning (SPP) without requiring ground-truth locations for training. GNetSS combines a transformer-based network with a deterministic differentiable positioning solver. The network predicts satellite-wise pseudorange corrections by modelling inter-satellite geometry and temporal context, while the solver converts these corrected measurements into receiver position corrections under GNSS geometry and optional motion constraints. Unlike supervised GNSS correction methods that rely on ground-truth, GNetSS derives its training signal directly from GNSS measurement consistency. Experimental results show that GNetSS improves robustness across open-sky, urban, and forested environments. The method is particularly effective at suppressing large-error outliers, reducing the maximum 3D positioning error by over 50% compared with SPP. These results demonstrate the potential of self-supervised pseudorange correction for scalable and robust GNSS positioning in real-world autonomy applications. Code and the in-house dataset will be released upon acceptance.

0.36