CS Paper Radar

Point-Supervised Visual Learning for GNSS Measurement Quality Assessment

Weiwei Zhai, Penggao Yan, Liang Wang, Li-Ta Hsu

eess.SP ·submitted 2026-10-10 11:36 UTC · v1

Abstract

Multipath and non-line-of-sight (NLOS) propagation degrade global navigation satellite system (GNSS) positioning accuracy in urban environments. Although fisheye sky segmentation identifies obstructions along satellite directions, binary visibility does not fully characterize observation quality. This study proposes a point-supervised visual framework that predicts GNSS observation faults from fisheye images using supervision derived from GNSS observations. During offline labeling, a vision-assisted differential GNSS procedure selects multiple reference satellites based on sky visibility and elevation constraints. Double-difference pseudorange residuals automatically generate fault labels and sample importance weights at satellite projection locations. A residual-weighted loss is computed only at valid labeled points, enabling learning from sparse supervision without manual pixelwise fault annotations. The trained network generates dense fault probability maps, which are sampled at satellite projection locations to weight observations in weighted least squares positioning, reducing the influence of potentially faulty observations. The framework is evaluated using U-Net, DeepLabv3+, DINOv3, and SAM3 on urban vehicle data collected on a different day from the training data. All four models reduce horizontal root mean square error (RMSE) by 29.51% to 36.07% compared with SAM binary sky segmentation, with U-Net achieving the lowest RMSE of 0.78 m. The framework also provides positioning solutions during some intervals when the segmentation baseline fails. These results demonstrate the framework's generalization ability and show that GNSS-derived point supervision enables fisheye images to provide observation quality information beyond binary sky visibility, supporting GNSS fault detection.

Closest papers

Nearest neighbours by meaning across the whole index.

GNSS Anomaly Detection in Urban Canyons: A Comprehensive Survey of Multimodal Visibility Inference

eess.SP ·2026-10-25 ·Abdelgabar Ahmed, Tarig Ballal, Nour Kouzayha, Tareq Y. Al-Naffouri
publishedsurvey similarity 0.64
Abstract · Accepted for publication in IEEE Aerospace and Electronic Systems Magazine. DOI: 10.1109/MAES.2026.3746915

Reliable GNSS positioning in dense urban environments depends on assessing satellite visibility and identifying measurements degraded by non-line-of-sight (NLOS) reception and multipath. This survey organizes reception-state inference into three complementary evidence families: receiver-side signals, 3D maps and environmental models, and auxiliary sensors. Receiver-side approaches span antenna/electromagnetic, tracking/baseband, and observable-domain evidence, interpreted through rule-based, statistical, machine-learning, and deep-learning methods. Map-based approaches are examined by reviewing environmental representations and methods such as geometric screening, shadow matching, 3D ray tracing, and neural implicit visibility prediction. IMU, camera, and LiDAR measurements provide complementary kinematic, visual, and geometric evidence for online screening. Across these families, we compare accuracy, interpretability, hardware and calibration requirements, map dependence, computational cost, and suitability for real-time deployment. We identify open challenges in dataset quality and labeling, domain generalization, map freshness, and resource-efficient implementation. The resulting synthesis connects signal processing, environmental modeling, and sensor fusion to guide the design of robust urban GNSS measurement-screening systems.

0.26

Revisiting the Task of Building Damage Assessment by Satellite Imaging

cs.CV ·2026-10-09 ·Anthony Cioppa, Virgile Blua, Sébastien Piérard, Pietro Ceccato, Marc Van Droogenbroeck
hot direction similarity 0.61
Abstract · 82 pages, 2 figures, 9 tables, 160 references

Natural disasters such as earthquakes, tropical storms, and floods cause extensive damage to buildings, and rapid, reliable damage maps are essential to guide emergency response. Automating this task, referred to as building damage assessment (BDA), from satellite imagery, has become an active research topic at the intersection of remote sensing, computer vision, and machine learning, particularly since supervised deep learning methods were shown to outperform earlier handcrafted approaches. Yet, despite a decade of intense activity and the release of several large-scale datasets, the field lacks a shared foundation. This chapter revisits the task of BDA from first principles, organized around three pillars: data, evaluation, and methods. We first clarify the candidate task for- mulations and argue for a sensor-agnostic, instance-based definition that tolerates missing pre-event imagery. We then review existing datasets along the axes of sensing modality, temporal configuration, and geographic coverage. On the evaluation side, we show that prevailing practices, largely based on a single aggregate score, are theoretically fragile, and we lay the foundations of a more informative, ranking-based, multi-score protocol. We further review methods ranging from task-specific deep networks to recent Earth observation foundation models, noticing that generalization to unseen events and regions remains an open difficulty. Finally, we discuss how these elements can inform the organization of a BDA challenge, including cross-validation, challenge, and private data-sharing setups designed to build trust between developers and users.

0.31

OpenCVL: An Open, Diverse, and Large-Scale Dataset for Fine-Grained Cross-View Localization

cs.CV ·2026-08-26 ·Zimin Xia, Mubariz Zaffar, Junsheng Fu, Alexandre Alahi, Julian F. P. Kooij
top venue similarity 0.61
Abstract

Fine-grained Cross-View Localization (CVL) estimates the precise position and orientation of a ground-level image by aligning it with geo-referenced aerial imagery, offering a scalable alternative to Global Navigation Satellite Systems (GNSS) in challenging urban environments. Existing datasets rely on data collected with high-end sensor suites, which inherently limit image diversity and scalability. While in-the-wild images are abundant, their noisy geo-tags make them unsuitable for reliable evaluation. To bridge this gap, we introduce OpenCVL, a large-scale, diverse, and open dataset containing 617,388 ground-aerial image pairs spanning 41 cities across four European countries. All images are sourced from permissive platforms, ensuring long-term accessibility and supporting open and reproducible research. The training set combines images captured with high-end sensors with diverse in-the-wild imagery. We further develop a data curation framework that filters and corrects pose annotations to construct reliable in-the-wild evaluation data. In addition, OpenCVL includes dedicated cross-area and snowy test sets to assess generalization and robustness. Experiments with a state-of-the-art CVL model on OpenCVL show that incorporating noisy in-the-wild data consistently improves performance on clean test sets, suggesting a promising direction for scaling CVL with diverse real-world imagery.

0.34

Towards Label-Efficient Geospatial Foundation Model Adaptation via Positive-Unlabeled Learning for Building Damage Mapping

cs.CV cs.AI ·2026-11-05 ·Hengwei Zhao, Qirui Wang, Zhuo Zheng, Xiaoyan Lu, Rusty Feagin +1 more
benchmark similarity 0.60
Abstract

Geospatial foundation models (GFMs) are reshaping remote sensing by shifting the field from task-specific modeling toward general-purpose geospatial intelligence. Mapping the damage to buildings stands to benefit substantially from this shift, as GFMs pretrained on large-scale Earth observation data provide generalizable geospatial representations that can facilitate effective responses to sudden-onset disasters. Although parameter-efficient fine-tuning (PEFT) facilitates GFM adaptation, parameter efficiency does not necessarily translate into label efficiency. Building damage mapping remains challenging due to scarce pre-existing labeled data or limited time for annotation. When weak supervision is introduced to alleviate the labeling bottleneck, we identify the difficulty of learning sufficiently discriminative representations as a key challenge for label-efficient GFM adaptation. To address this challenge, we propose a Positive-Unlabeled GFM Adaptation (PUMA) framework that requires annotations for only a small number of damaged buildings. More specifically, PUMA integrates non-contrastive weakly supervised representation refinement to mitigate the impact of noisy supervision on representation learning from a gradient perspective, and latent-state-based label disambiguation to enable reversible supervision refinement without requiring class prior estimation. Extensive experiments on disaster benchmark datasets from around the world demonstrated the effectiveness and robustness of PUMA. A real-world application to the 2025 Los Angeles wildfires further highlighted its potential to accurately map damage under highly limited supervision. More broadly, these findings suggest that weakly supervised PEFT offers a label-efficient pathway from GFMs to real-world applications.

0.15

Seeing Less in a Sparse World: Cross-View Geolocalization from Limited Field-of-View Observations

cs.CV ·2026-10-30 ·Fahimul Aleem, Shruti Vyas
code/data similarity 0.60
Abstract

Cross-view geolocalization aims to determine the geographic location of a ground-level image by retrieving its corresponding satellite image, offering a promising alternative for localization in Global Navigation Satellite System (GNSS)-denied or degraded environments such as urban canyons, dense forests, and disaster scenarios. Despite recent progress, existing approaches remain limited by the lack of globally diverse training datasets and benchmarks that are often geographically restricted. Furthermore, most benchmarks rely on panoramic ground views, which do not reflect the limited field-of-view imagery captured by real world cameras. To address these challenges, we introduce Cross-View World 500k (CVW500k), a large-scale globally distributed dataset containing over 500,000 ground-satellite image pairs collected across diverse geographic regions and environments. Unlike previous datasets, CVW500k uses limited field-of-view ground images, providing a more realistic and challenging setting for cross-view geolocalization. In addition, we propose GeoQueryNet, a query-based cross-view fusion transformer framework designed to bridge the viewpoint gap between ground and satellite images. The model leverages a CLIP-based visual encoder with parameter-efficient LoRA adaptation and introduces a Cross-View Alignment Module that uses learnable query tokens to extract geographically consistent features across viewpoints. Our code can be found here: https://github.com/Fahim17/Cross_View_World_Dataset.git .

0.29

Cross-View Sequential Visual Localization with Spatio-Temporal Context Modeling for Autonomous Driving

cs.CV cs.AI ·2026-08-11 ·Jiaping Wang, Shaobo Li, Zhen Wang
similarity 0.60
Abstract

Continuous and reliable localization is essential for autonomous driving. Cross-view visual localization matches ground images with satellite maps, providing complementary localization cues for pipelines that depend on Global Navigation Satellite System (GNSS) signals and high-definition (HD) maps. Most existing cross-view visual localization methods process each frame independently, leaving temporal information underused and limiting accuracy under dynamic occlusion, illumination variation, and repetitive textures. This study proposes a temporal-context-enhanced framework for cross-view sequence visual localization. The proposed recurrent cross-frame module aggregates historical context from the previous state to enhance the coarse ground feature of each current frame. These enhanced features facilitate satellite candidate-region classification, while hierarchical fine-grained features enable precise local offset estimation. On the CVIS dataset, the proposed method reduces mean localization error from 3.80 m to 1.57 m and increases R@1 m from 8.14% to 40.22%. Direct transfer to KITTI-CVL achieves a mean error of 2.61 m, with target-domain fine-tuning further reducing the mean error to 2.27 m. Zero-shot field experiments on a real-world vehicle achieve a mean error of 2.84 m and R@5 m of 96.86%. These results demonstrate that temporal context enhancement significantly improves cross-view localization accuracy and supports robust deployment on public benchmarks and real-world roads.

0.04

GAFT: Geo-Anchored Fine-Tuning for Hazard Identification from Rare Failures

cs.RO cs.CV ·2026-08-31 ·Yanran Xu, Chuanhang Qiu, Yue Wang, Wenbo Wu, Zhaoxing Li
benchmarkcode/data similarity 0.59
Abstract

Off-road navigation can fail when physical structures induce irrecoverable states such as high-centering or entrapment, requiring human interventions. Identifying these structures is crucial, yet challenging. Such failure events are rare and costly to collect, resulting in limited training data. Moreover, the collected data associate frames with outcomes, but do not indicate the visual cues responsible for the failure. Learning directly from these data can therefore exploit scenario-specific visual cues, leading to poor generalization. We propose \textbf{Geo-Anchored Fine-Tuning (GAFT)}, a parameter-efficient method that adapts a vision foundation model with a geometry-derived prior. It guides LoRA adaptation by aligning a spatial attention-rollout map with the geometry prior, while preserving pretrained representations. On an intervention-verified forest hazard benchmark, across ten independently trained adaptations, GAFT consistently outperforms frozen DINOv2 and supervised PEFT baselines, improving the repeated leave-one-scenario-out mean $F_2$ from 0.0607 to 0.3757 with statistical significance under paired analysis. Within these independently trained models, the best-performing GAFT model achieves a repeated-LOSO $F_2$ of 0.570. Code and benchmark: https://github.com/Xu-Yanran/geo_anchored_fine_tuning

0.53

How to Reduce Localization Ambiguity? Geometry-Semantic Constrained BEV Representation Learning for Satellite-Ground Localization

cs.CV ·2026-09-30 ·Junming Feng, Panwang Xia, Qiong Wu, Xudong Lu, Zeyu Jiao +6 more
similarity 0.58
Abstract · 10 pages, 2 figures, and 4 tables

Satellite-ground localization estimates the planar position and yaw orientation of a ground camera within a geo-referenced satellite image. Most recent methods map ground and satellite features into a shared bird's-eye-view (BEV) space and establish spatial correspondences. However, insufficient depth constraints can assign one ground feature to different distances along a viewing direction, creating geometric ambiguity in BEV feature placement. Similar appearances at different locations can also create descriptor matching ambiguity, while existing descriptor learning lacks explicit semantic supervision to distinguish them. We propose GeoSem-BEV, a geometry-semantic constrained BEV representation learning method. Radial depth supervision constrains distance assignment, and vertical height supervision constrains height aggregation. Shared explicit semantic supervision promotes consistent semantic predictions across views and helps distinguish locations with similar semantics. These constraints improve feature placement and descriptor discriminability, enhancing state-of-the-art BEV localization models. On VIGOR with unknown orientation, GeoSem-BEV reduces mean orientation error by 37.2% and 38.1% in the cross-area and same-area settings, respectively. The corresponding errors are reduced by 10.8% and 15.6% on DReSS-D. On KITTI-CVL, it reduces same-area mean orientation error by 26.8% under 10 degree orientation noise.

0.27