CS Paper Radar

GNetSS: Towards Learning GNSS Corrections without Ground Truth

JiaXu Chee, Simon Denman, Fahira Afzal Maken, Qingqing Cheng, Amir Khodabandeh, Milad Ramezani

cs.RO ·submitted 2026-11-19 07:44 UTC · v1

Abstract

We present GNetSS, a self-supervised GNSS position correction framework that improves the robustness of single point positioning (SPP) without requiring ground-truth locations for training. GNetSS combines a transformer-based network with a deterministic differentiable positioning solver. The network predicts satellite-wise pseudorange corrections by modelling inter-satellite geometry and temporal context, while the solver converts these corrected measurements into receiver position corrections under GNSS geometry and optional motion constraints. Unlike supervised GNSS correction methods that rely on ground-truth, GNetSS derives its training signal directly from GNSS measurement consistency. Experimental results show that GNetSS improves robustness across open-sky, urban, and forested environments. The method is particularly effective at suppressing large-error outliers, reducing the maximum 3D positioning error by over 50% compared with SPP. These results demonstrate the potential of self-supervised pseudorange correction for scalable and robust GNSS positioning in real-world autonomy applications. Code and the in-house dataset will be released upon acceptance.

Comment
14 pages, 7 figures, Submitted to NAVIGATION, Journal of the Institute of Navigation. See navi.ion.org

Closest papers

Nearest neighbours by meaning across the whole index.

Point-Supervised Visual Learning for GNSS Measurement Quality Assessment

eess.SP ·2026-10-10 ·Weiwei Zhai, Penggao Yan, Liang Wang, Li-Ta Hsu
similarity 0.63
Abstract

Multipath and non-line-of-sight (NLOS) propagation degrade global navigation satellite system (GNSS) positioning accuracy in urban environments. Although fisheye sky segmentation identifies obstructions along satellite directions, binary visibility does not fully characterize observation quality. This study proposes a point-supervised visual framework that predicts GNSS observation faults from fisheye images using supervision derived from GNSS observations. During offline labeling, a vision-assisted differential GNSS procedure selects multiple reference satellites based on sky visibility and elevation constraints. Double-difference pseudorange residuals automatically generate fault labels and sample importance weights at satellite projection locations. A residual-weighted loss is computed only at valid labeled points, enabling learning from sparse supervision without manual pixelwise fault annotations. The trained network generates dense fault probability maps, which are sampled at satellite projection locations to weight observations in weighted least squares positioning, reducing the influence of potentially faulty observations. The framework is evaluated using U-Net, DeepLabv3+, DINOv3, and SAM3 on urban vehicle data collected on a different day from the training data. All four models reduce horizontal root mean square error (RMSE) by 29.51% to 36.07% compared with SAM binary sky segmentation, with U-Net achieving the lowest RMSE of 0.78 m. The framework also provides positioning solutions during some intervals when the segmentation baseline fails. These results demonstrate the framework's generalization ability and show that GNSS-derived point supervision enables fisheye images to provide observation quality information beyond binary sky visibility, supporting GNSS fault detection.

0.32

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
publishedcode/data similarity 0.63
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.28

Observation Quality in DSM-Assisted Aerial Localization: A Benchmark and Base-Anchored Uncertainty Calibration

cs.CV ·2026-10-13 ·Pengyu Yin, Jie Pan, Junxiang Tan, Mengqi Fu, Kun Cheng +1 more
benchmark similarity 0.61
Abstract · 15 pages, 7 figures, 7 tables. Submitted to IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Aerial map matching provides position observations for navigation, but a position error alone does not determine how an observation should be weighted. We define five benchmark tasks: position availability and agreement, grouped error structure, predictive uncertainty, controlled updates, and temporal accumulation. We use digital-surface-model-assisted localization to test whether base-anchored uncertainty calibration improves the weighting of unchanged position estimates. The method combines propagated image and map sensitivities with the second moment of a compact configuration subset relative to the reported position. Scale is fitted using separate position references without local surface-height ground truth. Thirteen covariance models are evaluated on two held-out query sets from locations represented in the calibration data. Using reference residuals, we compare the method with a constant full-matrix baseline. With all localization failures included, the method reduces the normalized position-update risk, averaged equally across locations, by 7.70% on 728 conditions and 5.46% on a separate 142 conditions under an independent prior. On the primary set, the equal-location average negative log likelihood on reference residuals improves by 2.571 nat. At these seen locations, exploratory base-only quality calibration and conditional-addition controls leave the incremental update benefit of configuration disagreement unresolved. Navigation benefit and real temporal accumulation remain untested.

0.23

Robust 3DMA GNSS Positioning in Urban Areas Using Conservative Candidate Set Determination Based on GNSS Shadow and Reflection

eess.SP ·2026-10-31 ·Sanghyun Kim, Jiwon Seo
similarity 0.61
Abstract · Submitted to IEEE NAVICON 2026

In urban environments, global navigation satellite system (GNSS) positioning is often degraded by signal blockage and reflection caused by surrounding buildings. To address this problem, various three-dimensional mapping-aided (3DMA) GNSS techniques have been proposed. Among them, zonotope shadow and reflection matching (ZSRM) has demonstrated effective positioning performance by determining the candidate receiver position set using predicted GNSS shadow and reflection regions. However, ZSRM remains vulnerable to satellite signal misclassification, which may lead to positioning failure. To address this limitation, this paper proposes a conservative candidate set determination strategy for robust ZSRM positioning. Instead of using only the most probable signal reception condition from an artificial intelligence (AI)-based classifier, the proposed method combines the candidate regions associated with the two most probable classes. This allows the candidate receiver position set to be determined more conservatively, reducing the risk of positioning failure under signal misclassification. The proposed method was evaluated using real-world urban GNSS data. Experimental results show that the proposed method improved the positioning success rate to 100% for RF, GBDT, and SVM classifiers, compared with 8.2%-30.1% for the existing ZSRM algorithm using individual classifier outputs and 96.6% for ZSRM with unanimous voting. Although the proposed method increased the position bounds by retaining additional candidate regions, it produced smaller position bounds than ZSRM with unanimous voting. These results demonstrate that the proposed method substantially enhances the robustness of ZSRM under satellite signal misclassification in urban GNSS environments.

0.28

Coordination of Ground-to-Space Reference Networks for High-Precision GNSS

eess.SP ·2026-08-19 ·Xue Xian Zheng, Xing Liu, José A. López-Salcedo, Gonzalo Seco-Granados, Tareq Y. Al-Naffouri
published similarity 0.60
Abstract · Accepted by ION GNSS+ 2026

High-precision Global Navigation Satellite System (GNSS) services rely on accurate orbit, clock, atmospheric, and hardware-bias corrections generated from reference observations. These products are traditionally derived from terrestrial reference networks, whose performance strongly depends on the density and geographic distribution of ground stations. Consequently, sparse or regionally concentrated networks can suffer from tracking gaps and limited global observability, reducing their ability to support globally consistent high-precision products. Low Earth Orbit (LEO) constellations equipped with onboard GNSS receivers and inter-satellite links (ISLs) can serve as a network of spaceborne reference stations, offering a promising way to extend terrestrial reference networks into space, thereby improving observability for ground networks and enabling future direct correction broadcast. However, most existing network-based GNSS correction-generation workflows assume that observations can be centrally collected and processed. This assumption fails in practical ground--to--space architectures, where dynamic satellite geometry and system constraints render communication links intermittent, asymmetric, capacity-limited, and lossy. To address these limitations, this paper proposes a decentralized processing architecture that coordinates the ground-to-space GNSS reference network. By modeling ground stations and LEO satellites as interacting subnetworks over a dynamic graph, our approach allows frequent intra-tier communication while restricting cross-tier exchanges to compact estimation summaries transmitted opportunistically under probabilistic link availability....

0.22

GNSS Anomaly Detection in Urban Canyons: A Comprehensive Survey of Multimodal Visibility Inference

eess.SP ·2026-10-25 ·Abdelgabar Ahmed, Tarig Ballal, Nour Kouzayha, Tareq Y. Al-Naffouri
publishedsurvey similarity 0.60
Abstract · Accepted for publication in IEEE Aerospace and Electronic Systems Magazine. DOI: 10.1109/MAES.2026.3746915

Reliable GNSS positioning in dense urban environments depends on assessing satellite visibility and identifying measurements degraded by non-line-of-sight (NLOS) reception and multipath. This survey organizes reception-state inference into three complementary evidence families: receiver-side signals, 3D maps and environmental models, and auxiliary sensors. Receiver-side approaches span antenna/electromagnetic, tracking/baseband, and observable-domain evidence, interpreted through rule-based, statistical, machine-learning, and deep-learning methods. Map-based approaches are examined by reviewing environmental representations and methods such as geometric screening, shadow matching, 3D ray tracing, and neural implicit visibility prediction. IMU, camera, and LiDAR measurements provide complementary kinematic, visual, and geometric evidence for online screening. Across these families, we compare accuracy, interpretability, hardware and calibration requirements, map dependence, computational cost, and suitability for real-time deployment. We identify open challenges in dataset quality and labeling, domain generalization, map freshness, and resource-efficient implementation. The resulting synthesis connects signal processing, environmental modeling, and sensor fusion to guide the design of robust urban GNSS measurement-screening systems.

0.26

GLocFM: A Geometry-Aware Foundation Model for 3D Indoor Wireless Localization

eess.SP cs.AI ·2026-08-10 ·Chenghong Bian, Chaozheng Wen, Hongze Chen, Jun Zhang
similarity 0.58
Abstract · 13 pages, single column

Learning-based wireless localizers often fail to utilize geometric information about the propagation environment, limiting their ability to exploit non-line-of-sight (NLoS) propagation and generalize across scenes. To bridge this gap, we propose GLocFM, a Geometry-aware Localization Foundation Model, which jointly exploits WiFi measurements and scene geometry represented as a 3D point cloud. We formulate localization as a maximum-likelihood (ML) estimation problem, where the goal is to find a transmitter position that maximizes the likelihood of the wireless observations conditioned on the scene geometry. The likelihood of a candidate transmitter position is calculated by a learned scoring function that matches the observed delay--angle-of-arrival (AoA) spectrum against the spectrum predicted for that candidate. A hierarchical scene encoder extracts propagation-relevant features to produce geometric priors for LoS and one-bounce reflection paths. For scenarios with imperfect synchronization, we further introduce a time-of-flight (ToF)-robust GLocFM model to handle unknown ToF offsets. GLocFM is trained on a multi-modal synthetic indoor localization dataset comprising 221 diverse scenes whose associated wireless signals are generated using Sionna RT. On both synthetic and the NeRF$^{2}$ dataset based on real measurements, GLocFM reduces mean 3D localization error relative to one of the state-of-the-art localization baselines by 49.5\% and 48.8\%, respectively. Ablations across different number of receiver, bandwidths, and array sizes further demonstrate the effectiveness and robustness of the proposed framework.

0.40

DAC-MACE: Context-Conditioned Expert Routing for Compact Scene Coordinate Regression in Camera Relocalization

cs.CV ·2026-11-06 ·Dingying Fan, Mingkai Liu, Haohua Que, Haojia Gao, Xianliang Huang +3 more
similarity 0.57
Abstract · 10 pages, 6 figures. Submitted to IEEE Sensors Journal

A camera becomes an absolute pose sensor when its images can be relocalized against a prebuilt map of the scene. On mobile robots and augmented-reality devices, that map must be small and quick to build. Scene coordinate regression (SCR) stores the scene in a compact network that predicts a 3D coordinate for every pixel, and mixture-of-experts (MoE) variants extend its capacity to larger outdoor scenes. In existing MoE-based SCR, however, the router assigns each pixel to an expert from the same local descriptor that the experts regress from, so repeated facades and windows at different locations receive similar routing inputs. We present DAC-MACE, which conditions soft expert routing on recalibrated and contextualized features. A residual context adapter (RCA) reweights the channels and locations of frozen encoder features, a global context encoder (GCE) mixes them with multi-scale self-attention, and an image-level pooled descriptor is added to the router input. A dual-threshold RANSAC--Levenberg--Marquardt estimator recovers the pose. On Cambridge Landmarks, DAC-MACE attains a mean per-scene median translation error of 13.0 cm over three seeds, the lowest among the RGB-only SCR methods compared (GLACE 13.6 cm, MACE 14.4 cm), and reduces the error on the largest scene from 24 to 19 cm relative to MACE. In a cumulative study, the MoE head, GCE, RCA, and the dual-threshold estimator lower the mean error from 17.0 cm to 14.4, 14.0, 13.6, and 13.0 cm. On 7-Scenes, adding GCE to a single ACE head raises Recall@(5 cm, 5$^\circ$) from 86.56% to 87.60%.

0.30