CS Paper Radar

KODAMA: Multimodal Digital Twin Reconstruction for Urban RF Propagation Modelling

Maximiliano Wardle, A. Ryo Koblitz

cs.CV ·submitted 2026-09-07 10:16 UTC · v2

Abstract

3D reconstruction typically strives for geometric fidelity or visual plausibility. Radio frequency digital twins (RFDT) are instead judged by whether communication channels behave in them as they do in the real world. RFDTs promise site-specific channel prediction but current practice forces a choice between coarse automated scenes and hand-built, measurement-calibrated models that take weeks to construct per-site. We present KODAMA, an automated pipeline that reconstructs ray tracing-ready RFDTs at city scale from off-the-shelf geospatial data alone: aerial imagery, LiDAR, and photogrammetry yield terrain and watertight building meshes, while exposure-weighted multi-view fusion of street-level imagery recovers façade relief, electromagnetic materials, and clutter---all without site visits or calibration. Across three sites spanning 3.6 to 28 GHz, KODAMA's uncalibrated predictions achieve single-digit RMSE, reducing point-to-point error by up to 5.35 dB over automated baselines and coming within 0.22 dB of a measurement-calibrated, hand-built RFDT.

Closest papers

Nearest neighbours by meaning across the whole index.

HalifaxDT: A Wireless Digital Twin from Open Geospatial Data

cs.NI ·2026-09-05 ·Alexis Delplace, Xinyi Li, Samer Lahoud, Nur Zincir-Heywood
similarity 0.74
Abstract

Wireless digital twins can support site-specific analysis, planning, and experimentation for future wireless networks. However, constructing them at city scale remains challenging when accurate 3D city models are unavailable. This paper presents HalifaxDT, a wireless digital twin of the Halifax Peninsula in Nova Scotia, Canada, constructed from heterogeneous open geospatial and spectrum data. HalifaxDT combines building footprints, LiDAR elevation products, building metadata, and spectrum licensing records through a workflow that reconciles multiple sources of building-height information while preserving the provenance of geometry decisions. The resulting terrain, buildings, and gateway metadata are integrated into Sionna RT for wireless simulation. We evaluate HalifaxDT through two use cases. The first compares its coverage predictions with a reference derived from field measurements and with an analytical baseline. The second uses the digital twin to predict the received signal under normal operating conditions and detect interference. The coverage results show that HalifaxDT better preserves the spatial structure of the measured radio map than the analytical baseline. The interference study shows that deviations from the predicted reference can reveal interference that is difficult to detect from received power alone. We also identify current fidelity limitations, including simplified material representation, missing vegetation, and the need for broader RF calibration and synchronization with live measurements.

0.33

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
published similarity 0.73
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.33

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.69
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.68
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.63
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.45

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.63
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.62
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

Enhancing 3GPP Urban Channel Models For Terrestrial-to-Non-Terrestrial Communication

eess.SP ·2026-08-28 ·Gerhard Schreiber, Chenrui Sun, Joerg Schaepperle, Le-Hang Nguyen, Thorsten Wild
code/data similarity 0.62
Abstract

We have developed enhanced models for large-scale channel parameters intended for terrestrial-to-non-terrestrial (NTN) communication in Urban environments for supporting devices above ground levels, such as drones. The models are formulated as functions of terminal height above ground and elevation angle, applicable to S-Band and Ka-Band frequencies. To ensure realistic models, an open-source 3D scene generator was utilized to create a diverse set of urban scenes across Europe. Sionna ray-tracing was employed to generate path-gain samples for outdoor terminals, covering a range of heights up to 300 meters and elevation angles up to 90°. Our proposed analytical functions show excellent agreement to ray-tracing data for line-of-sight (LOS) probability, shadow-fading (SF), and clutter-loss (CL). Furthermore, a comparative coupling gain analysis with existing 3GPP models reveals notable differences, particularly caused by smaller CL and higher LOS probabilities from proposed models. Designed for ease of use, these models can be seamlessly integrated into simulation tools, offering a practical solution for researchers and engineers.

0.35