CS Paper Radar

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc

cs.AI eess.SP ·submitted 2026-09-26 20:24 UTC · v2

Abstract

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

Comment
Under Review

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
published similarity 0.74
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.33

KODAMA: Multimodal Digital Twin Reconstruction for Urban RF Propagation Modelling

cs.CV ·2026-09-07 ·Maximiliano Wardle, A. Ryo Koblitz
similarity 0.69
Abstract

3D reconstruction typically strives for geometric fidelity or visual plausibility. Radio frequency digital twins (RFDT) are instead judged by whether communication channels behave in them as they do in the real world. RFDTs promise site-specific channel prediction but current practice forces a choice between coarse automated scenes and hand-built, measurement-calibrated models that take weeks to construct per-site. We present KODAMA, an automated pipeline that reconstructs ray tracing-ready RFDTs at city scale from off-the-shelf geospatial data alone: aerial imagery, LiDAR, and photogrammetry yield terrain and watertight building meshes, while exposure-weighted multi-view fusion of street-level imagery recovers façade relief, electromagnetic materials, and clutter---all without site visits or calibration. Across three sites spanning 3.6 to 28 GHz, KODAMA's uncalibrated predictions achieve single-digit RMSE, reducing point-to-point error by up to 5.35 dB over automated baselines and coming within 0.22 dB of a measurement-calibrated, hand-built RFDT.

0.10

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.67
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.67
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

HalifaxDT: A Wireless Digital Twin from Open Geospatial Data

cs.NI ·2026-09-05 ·Alexis Delplace, Xinyi Li, Samer Lahoud, Nur Zincir-Heywood
similarity 0.66
Abstract

Wireless digital twins can support site-specific analysis, planning, and experimentation for future wireless networks. However, constructing them at city scale remains challenging when accurate 3D city models are unavailable. This paper presents HalifaxDT, a wireless digital twin of the Halifax Peninsula in Nova Scotia, Canada, constructed from heterogeneous open geospatial and spectrum data. HalifaxDT combines building footprints, LiDAR elevation products, building metadata, and spectrum licensing records through a workflow that reconciles multiple sources of building-height information while preserving the provenance of geometry decisions. The resulting terrain, buildings, and gateway metadata are integrated into Sionna RT for wireless simulation. We evaluate HalifaxDT through two use cases. The first compares its coverage predictions with a reference derived from field measurements and with an analytical baseline. The second uses the digital twin to predict the received signal under normal operating conditions and detect interference. The coverage results show that HalifaxDT better preserves the spatial structure of the measured radio map than the analytical baseline. The interference study shows that deviations from the predicted reference can reveal interference that is difficult to detect from received power alone. We also identify current fidelity limitations, including simplified material representation, missing vegetation, and the need for broader RF calibration and synchronization with live measurements.

0.33

Agentic Wireless Digital Twin Construction and Calibration Using Real-World Measurements

cs.IT ·2026-10-01 ·Fan-Hao Lin, Kun-Li Shih, Chu-Hsiang Huang, Hui Chen, Chao-Kai Wen +1 more
similarity 0.65
Abstract · 6 pages, 6 figures, 1 table. Submitted to IEEE conference

Wireless digital twins (WDTs) are promising enablers for developing and evaluating AI-native radio access networks, yet constructing a high-fidelity WDT typically requires substantial manual effort to integrate heterogeneous information and infer unknown propagation-related parameters. This paper proposes Agentic WDT (AWDT), an end-to-end agentic framework for autonomous WDT construction and calibration using readily available environmental information and measurements readily obtainable from commercial smartphones. AWDT comprises three agents: EnvAgent constructs the propagation environment, OpAgent infers BS and sector configurations, and MatAgent calibrates radio material properties. The agents iteratively refine the WDT using discrepancies between LTE/NR reference signal received power (RSRP) measurements and ray-tracing predictions. Real-world experiments show that AWDT reduces the RSRP prediction MAE from 11.46 to 5.25 dB, demonstrating a substantial improvement in ray-tracing fidelity. Evaluation with an independent measurement system further demonstrates cross-device transferability with lightweight device-specific bias adaptation, highlighting the potential of agentic AI for scalable WDT construction and calibration with limited prior knowledge.

0.21

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.65
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

cs.LG cs.IT ·2026-09-01 ·Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han
similarity 0.64
Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

0.21