CS Paper Radar

Agentic Wireless Digital Twin Construction and Calibration Using Real-World Measurements

Fan-Hao Lin, Kun-Li Shih, Chu-Hsiang Huang, Hui Chen, Chao-Kai Wen, Henk Wymeersch

cs.IT ·submitted 2026-10-01 10:33 UTC · v1

Abstract

Wireless digital twins (WDTs) are promising enablers for developing and evaluating AI-native radio access networks, yet constructing a high-fidelity WDT typically requires substantial manual effort to integrate heterogeneous information and infer unknown propagation-related parameters. This paper proposes Agentic WDT (AWDT), an end-to-end agentic framework for autonomous WDT construction and calibration using readily available environmental information and measurements readily obtainable from commercial smartphones. AWDT comprises three agents: EnvAgent constructs the propagation environment, OpAgent infers BS and sector configurations, and MatAgent calibrates radio material properties. The agents iteratively refine the WDT using discrepancies between LTE/NR reference signal received power (RSRP) measurements and ray-tracing predictions. Real-world experiments show that AWDT reduces the RSRP prediction MAE from 11.46 to 5.25 dB, demonstrating a substantial improvement in ray-tracing fidelity. Evaluation with an independent measurement system further demonstrates cross-device transferability with lightweight device-specific bias adaptation, highlighting the potential of agentic AI for scalable WDT construction and calibration with limited prior knowledge.

Comment
6 pages, 6 figures, 1 table. Submitted to IEEE conference

Closest papers

Nearest neighbours by meaning across the whole index.

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.65
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
published similarity 0.64
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.33

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.60
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Site-Specific Cell Shaping: An Agentic Framework

eess.SY ·2026-11-14 ·Zhuo Xu, Zhaolin Wang, Yuanwei Liu
benchmark similarity 0.60
Abstract

An agentic framework is proposed for cell shaping in future sixth-generation (6G) wireless network planning. Cell shaping controls the coverage and interferences of base stations (BSs) through antenna parameters configuration, providing an important means of improving coverage. In contrast to conventional approaches that reply on costly performance evaluations, the proposed framework achieves intelligent and efficient antenna configuration through a perception-reasoning-reflection loop. Specifically, a Configuration Agent combines scene information, evaluation history, and reflection feedback to generate antenna configuration proposals. Then, a ray tracing(RT)-based evaluator assesses these proposals and returns a structured performance summary. Next, a Reflection Agent interprets these results to diagnose site-specific performance deficiencies, recommend feasible configuration adjustments, and accumulate conditional experience. Through this iterative process, the framework accumulates site-specific experience and progressively refines antenna configurations without human-in-the-loop intervention. Simulations in real-world urban scenarios demonstrate that the proposed framework achieves lower outage probabilities than the considered benchmark methods, highlighting the effectiveness of agentic reasoning and reflection in translating site-specific performance feedback and accumulated experience into adaptive antenna configuration decisions.

0.20

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.58
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Agents in the Scene: An Agentic Framework for Resource-Efficient Site-Specific Base Station Deployment

eess.SY ·2026-09-16 ·Zihao Zhou, Zhaolin Wang, Yuanwei Liu
similarity 0.58
Abstract

An agentic framework is proposed for autonomous site-specific base station (BS) deployment in wireless network planning. In contrast to conventional approaches that rely on manual site surveys or extensive ray-tracing (RT) simulations with significant human intervention, the proposed framework autonomously explores and optimizes BS deployment under a limited RT evaluation budget, enabling resource-efficient network planning. To this end, a continuous, geometry-grounded deployment action space is first constructed from three-dimensional (3D) wireless digital twins. Within this action space, an agent team operates through a stateful perception--reasoning--reflection loop. Specifically, a Placement Agent first generates candidate BS deployments in two complementary modes: an experience-guided mode that refines promising solutions, and an exploration mode that avoids getting stuck in local optima. After the candidate deployments are evaluated through RT, a Reflection Agent interprets the RT results together with the scene geometry, identifies performance-limiting factors such as blockage, overlapping coverage, and uncovered areas, and converts these diagnoses into guidance for subsequent deployment. Through this iterative process, site-specific experience is accumulated and deployment plans are optimized without human intervention. Numerical results in two realistic urban scenarios show that: 1) the proposed approach substantially outperforms heuristic, learning-based, and large language model (LLM)-assisted methods; 2) it achieves highly competitive coverage against the optimal solution while requiring substantially fewer transmitter-level RT evaluations; 3) site-specific reflection effectively turns raw RT feedback into refinement guidance, whereas the dual-mode mechanism preserves diversity and facilitates escape from local optima.

0.26

Site-specific Channel Modeling Based on Remote-Sensing Maps for 6G Space--Air--Ground Digital Twins

eess.SP ·2026-08-31 ·Peijie Liu, Pan Tang, Jianhua Zhang, Lei Tian, Bin Ao +2 more
similarity 0.57
Abstract · 17 pages, 23 figures, 4 tables

Site-specific channel models are essential for wireless digital twins of 6G space--air--ground communication systems. However, 3D maps are difficult to obtain over wide areas, which limits large-area site-specific channel modeling. To address this issue, this paper proposes a remote-sensing-based augmented ray-tracing channel modeling framework. The framework comprises a deterministic RT branch, a measurement-statistical branch, and an RT augmentation branch. To overcome the difficulty of acquiring large-area 3D maps, the deterministic RT branch reconstructs a 3D RT scene from satellite remote-sensing imagery and calibrates its electromagnetic material parameters using measured path loss. To provide the statistical parameters required for RT augmentation, the measurement-statistical branch establishes the marginal distributions and interparameter dependence models of the channel parameters. Specifically, a wideband UAV channel measurement campaign is conducted at 4.60 GHz, and a proposed multipath estimation method estimates the complex amplitudes, delays, and Doppler shifts of the measured multipath. To bridge the gap between RT predictions and measurements, the RT augmentation branch organizes the RT multipath into LoS, LoS-tail, and NLoS components, generates additional short-delay LoS-tail paths, and reallocates the component and path powers according to the measurement-derived statistics while preserving the total RT received power. The validation results show that the proposed framework reduces the path loss RMSE from 5.45 to 4.35 dB and, relative to calibrated RT, decreases the RMS delay spread and normalized Doppler spread RMSEs by 53.03 and 26.48, respectively. The proposed framework provides a site-specific channel modeling approach for 6G space--air--ground digital-twin studies.

0.26

KODAMA: Multimodal Digital Twin Reconstruction for Urban RF Propagation Modelling

cs.CV ·2026-09-07 ·Maximiliano Wardle, A. Ryo Koblitz
similarity 0.57
Abstract

3D reconstruction typically strives for geometric fidelity or visual plausibility. Radio frequency digital twins (RFDT) are instead judged by whether communication channels behave in them as they do in the real world. RFDTs promise site-specific channel prediction but current practice forces a choice between coarse automated scenes and hand-built, measurement-calibrated models that take weeks to construct per-site. We present KODAMA, an automated pipeline that reconstructs ray tracing-ready RFDTs at city scale from off-the-shelf geospatial data alone: aerial imagery, LiDAR, and photogrammetry yield terrain and watertight building meshes, while exposure-weighted multi-view fusion of street-level imagery recovers façade relief, electromagnetic materials, and clutter---all without site visits or calibration. Across three sites spanning 3.6 to 28 GHz, KODAMA's uncalibrated predictions achieve single-digit RMSE, reducing point-to-point error by up to 5.35 dB over automated baselines and coming within 0.22 dB of a measurement-calibrated, hand-built RFDT.

0.10