CS Paper Radar

Hybrid Ray-Tracing and Physics-Embedded Neural Modeling for High-Fidelity Channel Reconstruction in Wireless Digital Twins

Huiwen Zhang, Chu Ma, Feng Ye

cs.NI ·submitted 2026-10-04 01:42 UTC · v1

Abstract

Many existing wireless digital twins (DTs) rely heavily on ray-tracing (RT)-based channel simulators to achieve scalability in large-scale environments. However, the geometric-optics (GO) approximations underlying RT become inaccurate in propagation regimes dominated by diffraction and refraction, which are prevalent at sub-6 GHz carrier frequencies. This paper presents a hybrid RT and physics-embedded physics-informed neural network (PE-PINN) framework that enhances site-specific wireless DTs with physics-consistent full-wave accuracy. Building on prior PE-PINN work, we introduce targeted architectural extensions, including a finite-length edge diffraction kernel and a lossy dielectric formulation based on complex wavenumbers, to accurately model electromagnetic wave interactions with realistic objects and materials. To balance accuracy and efficiency, we further propose a localized tunnel strategy that deploys PE-PINN models only along dominant propagation paths, selectively replacing or augmenting RT predictions in regions where GO assumptions break down. Comprehensive evaluations against full-wave COMSOL simulations demonstrate that the proposed framework closely matches reference solutions and significantly outperforms RT-only approaches in diffraction- and refraction-dominated scenarios. We further demonstrate seamless integration of the proposed approach into a realistic indoor wireless DT, highlighting its practicality and scalability for next-generation wireless network design.

Comment
Submitted to an IEEE transaction

Closest papers

Nearest neighbours by meaning across the whole index.

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.61
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

PE-EK-PINN: Physics Embedding with Evolving Kernel for Scalable Physics-Informed Neural Networks

cs.AI ·2026-09-29 ·Huiwen Zhang, Feng Ye, Chu Ma
similarity 0.61
Abstract · 17 pages, conference submission

Physics-Informed Neural Networks (PINNs) embed governing equations into deep learning, but enforce them only through loss residuals, leaving highly oscillatory wave behavior to be discovered by optimization. As a result, methods that achieve relative $L_2$ errors below $10^{-3}$ on standard manufactured Helmholtz benchmarks can fail on practical radiation problems involving singular excitations, absorbing boundaries, and wave fields spanning tens of wavelengths. Architectural physics embedding addresses this limitation by factorizing the field into analytically derived oscillatory kernels and learnable envelopes. However, the kernel dictionary must be manually constructed and scales with the number of elementary units, growing exponentially with the depth of hierarchically structured systems such as antenna arrays and metasurfaces. We propose PE-EK-PINN (Physics Embedded with Evolving Kernels), which treats physics kernels as reusable learned representations rather than fixed analytical inputs. A converged subsystem field is frozen and promoted to an evolved kernel, whose transformed copies are reused to represent higher-level configurations without deriving new governing equations. The resulting hierarchy makes the peak number of active kernels independent of system size and reduces cumulative training cost from $O(N)$ to $O(\log N)$. Experiments on dipole arrays, composite line-source geometries, and cross arrays demonstrate the dramatic training cost reduction, while achieving a reduced or comparable relative $L_2$ error. One notable example is PE-EK-PINN solves a $256$-dipole array more than 30 times faster than direct PE-PINN.

0.25

MPSi: Neural Extraction of Site-Specific Multipath Propagation Properties for Massive MIMO

eess.SP ·2026-11-07 ·Maryam Rezvani, Raviraj Adve, Amr El-Keyi, Akram bin Sediq
similarity 0.60
Abstract · Submitted to IEEE for possible publication

Accurate extraction of site-specific multipath propagation properties enables a wide range of wireless applications, including initial access, wideband channel reconstruction, and the generation of channel datasets for learning-based and continual-learning systems. Classical parametric channel-sounding algorithms such as RIMAX provide physically interpretable estimates, but their data-dependent model-order selection and iterative nonlinear refinement introduce substantial delay and computational cost. This paper proposes MPSi, a physics-guided neural framework that replaces these costly stages with a compact path-count network and a fixed-depth, deep-unfolded Levenberg-Marquardt refinement. MPSi estimates the complex gain, angle of arrival, and propagation delay of each multipath component while preserving the underlying physical channel model. We evaluate MPSi in two site-specific ray-traced environments, a small cell and a dense urban area, and show that it achieves initial-access and full-channel-estimation performance comparable to an enhanced RIMAX baseline while requiring significantly fewer optimization iterations. The reconstructed channels also yield bit-error-rate performance close to the perfect-channel knowledge reference. These results position MPSi as a promising low-overhead framework for extracting multipath propagation properties in massive-MIMO systems and for generating cell-specific channel pseudo-labels for training when direct ground-truth measurements are unavailable.

0.31

Tri-Band Channel Measurement-Enabled Multi-Layer Digital Twin for Terahertz Wireless Data Centers

cs.LG cs.IT ·2026-09-01 ·Mingjie Zhu, Ziming Yu, Guangjian Wang, Chong Han
similarity 0.59
Abstract

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

0.21

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.59
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Physics-Unrolled Neural Operator for Accelerating High-Fidelity Wireless Ray Tracing

cs.LG cs.AI ·2026-08-19 ·Rafid Umayer Murshed, Saif Ur Rahman, Mingyue Tang, Elahe Soltanaghai
top venuetheoryhot direction similarity 0.59
Abstract · Accepted at NeurIPS 2026 (camera-ready version). 42 pages, 8 figures, 14 tables

Site-specific wireless design relies on ray tracing to predict how signal strength varies across a floorplan, but a converged indoor radio map takes tens of seconds to simulate and planning a single building requires thousands of them. A learned surrogate can remove most of that cost, yet training one runs into a second problem: high-fidelity labels are exactly what is too expensive to produce at scale, so the affordable labels come from finite-ray simulations that carry residual Monte Carlo noise. We address this with RayNO, a physics-unrolled neural operator that reconstructs the converged output of a ray tracer from one cheap low-fidelity run and scene priors. Rather than treating a radio map as a generic image, RayNO refines the field through three stages matched to reflection, diffraction, and scattering, each supervised by a label of matching physical complexity. We prove that when the label error is conditionally unbiased the learned operator can end up closer to the high-fidelity reference than the labels it was trained on, and we verify that condition directly in the simulator using repeated independent ray seeds. Across diverse floorplans, RayNO outperforms image-to-image baselines, wireless learning models, monolithic neural operators, and classical multi-fidelity regression on both image-quality and wireless deployment metrics, while reducing the cost of a high-fidelity map from roughly 28 s to 0.11 s.

0.51

Neural Multipath Fields for 6G FR3 Digital Twins: Latent Adaptation from Sparse Data

eess.SP ·2026-11-09 ·Srijita Sanyal, Adam Umra, Aydin Sezgin
similarity 0.59
Abstract

Wireless digital twins are essential for environment-aware 6G communications, motivating the investigation of frequency range 3 (FR3), an emerging mid-band regime offering a promising balance between bandwidth and propagation characteristics. Neural Radio Frequency (RF) fields provide continuous surrogates for site-specific radio propagation, but adapting a scene-specific field to a new environment can require substantial measurements and retraining. To this end, we propose the Latent-Adaptive Neural Multipath Field (LANMF), a scene-conditioned FR3 model that predicts path-resolved delays, complex channel impulse response (CIR) coefficients, and arrival and departure directions from transmitter-receiver coordinates. LANMF learns shared propagation representations across source environments and adapts to unseen scenes by optimizing only a 16-dimensional scene latent. Evaluated on six ray-traced indoor scenes at 7.5 GHz, latent-only adaptation yields improvements in prediction with just 5-10 target links (0.42-0.83% of available links). Compared with full-network fine-tuning, it updates only 16 persistent target parameters, reducing adaptation time by 28-30% and incremental peak GPU memory by 82-85%. While the proposed solution supports various wireless applications, we demonstrate its utility through beam-candidate reduction using a 64-beam codebook, retaining measurement-based final beam selection.

0.34

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.59
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29