CS Paper Radar

Physics-Unrolled Neural Operator for Accelerating High-Fidelity Wireless Ray Tracing

Rafid Umayer Murshed, Saif Ur Rahman, Mingyue Tang, Elahe Soltanaghai

cs.LG cs.AI ·submitted 2026-08-19 03:39 UTC · v2
top venuetheoryhot direction

Abstract

Site-specific wireless design relies on ray tracing to predict how signal strength varies across a floorplan, but a converged indoor radio map takes tens of seconds to simulate and planning a single building requires thousands of them. A learned surrogate can remove most of that cost, yet training one runs into a second problem: high-fidelity labels are exactly what is too expensive to produce at scale, so the affordable labels come from finite-ray simulations that carry residual Monte Carlo noise. We address this with RayNO, a physics-unrolled neural operator that reconstructs the converged output of a ray tracer from one cheap low-fidelity run and scene priors. Rather than treating a radio map as a generic image, RayNO refines the field through three stages matched to reflection, diffraction, and scattering, each supervised by a label of matching physical complexity. We prove that when the label error is conditionally unbiased the learned operator can end up closer to the high-fidelity reference than the labels it was trained on, and we verify that condition directly in the simulator using repeated independent ray seeds. Across diverse floorplans, RayNO outperforms image-to-image baselines, wireless learning models, monolithic neural operators, and classical multi-fidelity regression on both image-quality and wireless deployment metrics, while reducing the cost of a high-fidelity map from roughly 28 s to 0.11 s.

Comment
Accepted at NeurIPS 2026 (camera-ready version). 42 pages, 8 figures, 14 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Scaling Cheap Synthetic Pretraining Improves Indoor Radio-Map Prediction

cs.LG cs.AI ·2026-10-13 ·Khoren Petrosyan, Artashes Mkrtchyan, Rafayel Mkrtchyan, Hrant Khachatrian, Theofanis P. Raptis
top venuebenchmarkcode/data similarity 0.68
Abstract · Accepted at NeurIPS 2026. This research was in part sponsored by the HESC MESCS RA grant No. 22rl-052 (DISTAL), and by the NATO Science for …

Real measurements are too limited to train an accurate indoor pathloss predictor that works across a wide range of buildings. Large-scale synthetic pretraining offers a way forward, but real building layouts are also scarce, and accurate ray-tracing simulators are slow, expensive, and often proprietary. We address both problems by introducing a generator that automatically creates diverse indoor layouts and a fast, open-source approximate ray tracer that computes radio maps for them. Using this pipeline, we generate 128M synthetic samples, pretrain ResNet-101 and Swin-T encoder-decoders, and fine-tune them on high-quality benchmark data. Despite simulator mismatch, our ResNet-101 model reduces error by 15% on average relative to the best known methods across five indoor radio-map prediction tasks and improves transfer on a small real-measurement dataset. Both architectures show predictable data-scaling trends: power laws fitted on 2M-16M samples predict the mean normalized downstream RMSE at 32M-128M with 3.33% mean absolute percentage error for ResNet-101 and 7.10% for Swin-T. These results show that pretraining on large amounts of cheap simulated data can improve indoor radio-map prediction, even when real measurements and high-quality simulations are limited.

0.38

PTNO: Training Neural Operators with Noisy Monte Carlo Estimates for Particle Transport Problems

cs.AI cs.LG ·2026-09-30 ·Yubo Cao, Xi Deng, Mengqi Xia, Vignesh Gopakumar, Ander Gray +1 more
similarity 0.67
Abstract · 41 pages, 15 figures, 35 tables. v2: Yubo Cao and Xi Deng are co-first authors with equal contribution; corrected the author footnote

Particle transport under multiple scattering is central to radiative transfer and plasma physics, yet high-fidelity Monte Carlo (MC) simulations must trace prohibitively many particles. Learning-based surrogates can amortize this cost, but typically train on expensive, well-converged MC solutions. We propose the Particle Transport Neural Operator (PTNO), a neural operator that learns particle transport surrogates directly from noisy, low-cost MC labels. Such labels pose two challenges: (1) high variance, which destabilizes standard supervised learning, and (2) a high dynamic range (HDR) spanning many orders of magnitude. For the first, we learn the solution operator from noisy labels of many configurations, amortizing MC cost and generalizing to unseen configurations. Because MC labels are unbiased, we show that the squared loss on them shares its minimizer with the loss on converged solutions, and our budget-allocation study over training scenes $M$, MC samples per render $N$, and independent renders per scene $K$ shows that many noisy scenes beat fewer converged ones. For the second, a nonlinear transform such as the logarithm biases noisy supervision. Instead, PTNO keeps labels in physical space and enforces positivity with a softplus output layer that represents small values effectively. We further train with a pointwise relative $L_2$ loss (PRelL2), the stop-gradient relative loss of HDR denoising and neural rendering, which normalizes each residual by the stop-gradient prediction instead of the noisy label. We demonstrate PTNO on neutron transport in fusion reactors and radiative transfer in participating media. On the two neutronics tasks, PTNO is $10^4$-$10^5\times$ faster than converged MC on the same CPU and $10^3$-$10^5\times$ cheaper than MC at matched accuracy; on the two radiative-transfer tasks, MC at matched accuracy costs $0.8$-$11\times$ as much as PTNO.

0.48

GCNO: Gramian Chebyshev Neural Operator for Physics-Based Compression of Wireless Channels

cs.IT cs.AIcs.LG ·2026-08-19 ·Rafid Umayer Murshed, Shahab Hamidi-Rad, Elahe Soltanaghai, Akshay Malhotra
similarity 0.63
Abstract · 22 pages, 6 figures, 19 tables

Large antenna arrays allow wireless systems to serve more users and achieve higher data rates, but they also make channel feedback expensive: the receiving device must repeatedly report a large complex-valued channel matrix to the base station. Most neural compressors treat this matrix like an image and replace it with a fixed-length code that only a matched neural decoder can interpret. The message therefore does not adapt to channel complexity, and changing the antenna count typically requires retraining. We ask whether a device can instead report only the few dominant propagation paths underlying each channel. We introduce the Gramian Chebyshev Neural Operator (GCNO), a physics-based, variable-rate compressor that identifies a sample-dependent set of path directions. GCNO uses receive-transmit channel structure to locate paths, a first-order Taylor correction to refine directions that fall between grid points, and least squares to recover their complex strengths. It is trained without path labels, and the base station reconstructs the channel analytically from the transmitted path tuples rather than through a learned decoder. Across three ray-traced environments, GCNO achieves better reconstruction accuracy at the same payload - or lower payload at the same accuracy - than neural feedback baselines, and transfers to unseen antenna counts without retraining.

0.50

Inductively Scalable, Single-Step Neural Surrogates for Wave-Scattering Inverse Problems

cs.AI physics.optics ·2026-08-18 ·Charles Dove, Laura Waller
similarity 0.63
Abstract

Neural network surrogates are an emerging alternative to traditional electromagnetic wave simulators like finite-difference time-domain (FDTD); their goal is to replace rigorous physical simulations with pre-trained neural networks that solve wave-scattering forward and inverse problems orders of magnitude faster. However, nonrecurrent, single-step surrogates have scaled only to a few tens of simulation variables. Here, we show that this barrier can be overcome by dynamically generating salient training examples during training, rather than randomly sampling the large space of possible examples. We introduce an algorithm that runs in parallel with surrogate training, using gradient ascent to search refractive-index and source configurations for cases where the surrogate disagrees with a full-wave ground-truth simulator. We also use source and ground-truth normalization with an evolving replay dataset to stabilize and accelerate learning. Using this approach, we train a fast, single-step surrogate for two-dimensional wave scattering with up to 41,772 controllable variables, including dense, freely configurable grids of refractive indices and complex-valued sources. The resulting neural surrogate is robustly accurate across diverse structured and unstructured examples and generalizes inductively to larger domains, reaching over 3 million controllable variables without retraining, a $73.8\times$ increase. We demonstrate the surrogate on large-scale forward simulations and inverse design of freeform beam splitters and gradient-index (GRIN) lenses up to 98 wavelengths wide, showing comparable or better performance than FDTD-based designs, with speedups from $1.29\times$ to $26.5\times$. These results demonstrate a practical path toward fast, robustly accurate, inductively scalable neural simulators for photonic inverse design and other wave-scattering inverse problems.

0.24

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

eess.SP ·2026-10-06 ·Wenyu Huang, Alireza Javid, Nuria González-Prelcic
code/data similarity 0.62
Abstract · This work has been submitted to the IEEE for possible publication

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

0.25

RFWM: Physics-Guided World Model for Dynamic Wireless Radiance Field Generation

cs.NI ·2026-08-20 ·Zijiu Yang, Qianqian Yang
benchmarkhot direction similarity 0.62
Abstract

Radio-frequency (RF) radiance-field modeling is essential for wireless network optimization and sensing, yet remains challenging in dynamic and unseen environments. Existing learning-based methods synthesize RF fields from sparse measurements, but most struggle to generalize to dynamic and unseen environments. To address this limitation, we propose RFWM, a physics-guided RF world model that maps multimodal physical conditions like visual dynamics and AP configurations to spatiotemporal RF fields. RFWM adopts a two-stage training strategy with physics-guided priors and constraints. In the first stage, RFWM adapts a pretrained visual diffusion backbone to RF trajectories to predict RF sequences from a few past RF inputs, while conditioning the backbone on a Friis-guided prior for coarse attenuation guidance. In the second stage, RFWM learns the physical-to-RF mapping by training a ControlNet from scratch and fine-tuning the RF-adapted backbone, while six physics-guided regularizers enforce fine-grained propagation consistency. Cross-height heads then jointly generate RF trajectories at queried receiver heights in one forward pass. We construct a new benchmark of 7,715 sequences averaging 33 frames across 115 environments for dynamic RF-field generation. Experimental results show that RFWM improves MSE by approximately 7 dB and 3 dB over the state of the art under in-distribution and out-of-distribution settings, respectively.

0.29

SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

eess.SP ·2026-09-05 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +3 more
similarity 0.62
Abstract · 6 pages, 4 figures

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

0.19

Synergizing Data-Driven Learning and Physical Rendering for Radio Map Prediction

eess.SP ·2026-11-12 ·Junyu Jiang, Jing Wang, Yantao Wang, Xinhao Li, Yi Zhang +2 more
similarity 0.62
Abstract

Accurate urban radio map prediction is challenging due to complex building geometries and sophisticated electromagnetic interactions. To address this, we propose a data- and physics-driven framework that decouples wave propagation from environmental feature extraction. The core idea is to predict a sparse set of low-dimensional Secondary Reradiation Points (SRPs), which, together with a closed-form renderer deduced from electromagnetic theory, yields the final radio map. By learning these SRPs end-to-end rather than directly regressing the high-dimensional map, the neural network focuses on a compact physical parameterization, significantly improving accuracy and generalization. Numerical experiments demonstrate that our framework outperforms all seven baselines and consistently yields the lowest errors across all building-coverage quintiles, underscoring its robustness in dense, heavily obstructed urban environments.

0.13