CS Paper Radar

RFWM: Physics-Guided World Model for Dynamic Wireless Radiance Field Generation

Zijiu Yang, Qianqian Yang

cs.NI ·submitted 2026-08-20 07:08 UTC · v1
benchmarkhot direction

Abstract

Radio-frequency (RF) radiance-field modeling is essential for wireless network optimization and sensing, yet remains challenging in dynamic and unseen environments. Existing learning-based methods synthesize RF fields from sparse measurements, but most struggle to generalize to dynamic and unseen environments. To address this limitation, we propose RFWM, a physics-guided RF world model that maps multimodal physical conditions like visual dynamics and AP configurations to spatiotemporal RF fields. RFWM adopts a two-stage training strategy with physics-guided priors and constraints. In the first stage, RFWM adapts a pretrained visual diffusion backbone to RF trajectories to predict RF sequences from a few past RF inputs, while conditioning the backbone on a Friis-guided prior for coarse attenuation guidance. In the second stage, RFWM learns the physical-to-RF mapping by training a ControlNet from scratch and fine-tuning the RF-adapted backbone, while six physics-guided regularizers enforce fine-grained propagation consistency. Cross-height heads then jointly generate RF trajectories at queried receiver heights in one forward pass. We construct a new benchmark of 7,715 sequences averaging 33 frames across 115 environments for dynamic RF-field generation. Experimental results show that RFWM improves MSE by approximately 7 dB and 3 dB over the state of the art under in-distribution and out-of-distribution settings, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

WiNeRF: Measurement Constrained Radiance Fields for Actionable Wireless Channel Modeling

cs.NI cs.LG ·2026-08-24 ·Saif Ur Rahman, Rafid Umayer Murshed, Anton Dmitriev, Cagri Tanriover, Rahul C. Shah +1 more
published similarity 0.70
Abstract · Accepted to EWSN 2026

Wireless embedded systems increasingly rely on wireless channel information for decision making, yet practical platforms operate under severe constraints, including few antennas, narrow bandwidth, and sparse, noisy measurements. While neural field based approaches inspired by Neural Radiance Fields (NeRFs) have recently been explored for continuous wireless channel modeling, existing approaches depend on dense measurements or external priors such as known geometry, visual context, or angle-of-arrival (AoA) information, limiting their practicality in real-world deployments. We present WiNeRF, a neural field framework that learns a spatially continuous, complex-valued wireless channel representation directly from sparse channel state information (CSI) collected by commodity WiFi devices. WiNeRF embeds intrinsic system constraints, such as antenna geometry, limited spatial resolution, and phase uncertainty, as inductive biases through a 3D conical wave sampling model, a multi-resolution implicit scene representation, and a differentiable optimization framework for complex-valued channel learning. Across diverse indoor environments with non-line-of-sight (NLoS) regions, WiNeRF achieves a median prediction SNR of 5.3 dB, outperforming prior neural baselines by 4.9 dB on average (approximately 3x higher prediction SNR), and produces a task-agnostic channel representation that can be directly reused in standard signal-processing pipelines, including beamforming, AoA estimation, and RSSI coverage mapping, without modifying existing hardware or wireless protocols.

0.36

Prop-WRF: Proposal-Guided Wireless Radiance Field for Scalable Multi-Frequency Outdoor Channel Frequency Response Prediction

eess.SP ·2026-11-09 ·Yulin Fu, Jiancun Fan, Shiyu Zhai, Zhibo Duan, Jie Luo
similarity 0.65
Abstract

Sparse-directional wireless radiance fields (WRFs) enable complex channel frequency response (CFR) prediction from receiver locations and multipath direction priors. However, in large-scale outdoor environments, long sampling intervals make it difficult to concentrate a limited sampling budget around valid virtual anchors (VAs), degrading prediction accuracy and training stability. This paper proposes Prop-WRF, a proposalnetwork-guided WRF for CFR prediction across multiple subcarriers. A lightweight proposal network learns VA occupancy densities through online distillation from the main network and iteratively guides resampling toward likely VA locations. The main network then predicts complex radiance over the refined intervals and synthesizes CFRs using an analytical propagation model. By introducing frequency encoding only into the radiance branch, a single model jointly learns shared VA geometry from observations across subcarriers while representing frequencydependent complex radiance. A stage-wise hybrid normalized loss and an interval-weight regularizer further strengthen weakchannel supervision and suppress spurious VA peaks. In addition, a multipath simultaneous localization and mapping (SLAM) front end refines receiver states and path associations to construct geometrically consistent training priors. Simulations show that Prop-WRF improves CFR prediction accuracy and training stability over conventional sparse-directional WRF baselines in larger environments.

0.22

DyTransRM: A Unified Simulation-to-Real Framework for Dynamic Radio Map Prediction

eess.SP ·2026-11-14 ·Simin Wang, Jiayi Wei, Jihong Li, Guhan Zheng, Rui Cheng +1 more
similarity 0.64
Abstract · 14 pages, 5 figures

Dynamic radio map (RM) prediction enables proactive wireless network control by forecasting future propagation conditions from historical observations. However, collecting temporally continuous and spatially dense real-world RMs is prohibitively expensive, while models trained on large-scale simulated data often suffer from limited transferability to real environments. To address this issue, we propose DyTransRM, a unified simulation-to-real framework for dynamic RM prediction under sparse real-world measurements. DyTransRM first introduces RadioCLIP to learn physics-semantic representations by aligning environmental evolution with the corresponding propagation evolution, thereby improving both prediction accuracy and cross-domain transferability. To further bridge the simulation-to-real gap, SparseUOT employs sparse-mask simulation refinement to mimic realistic measurement patterns and unbalanced optimal transport to selectively align compatible propagation representations across domains. Experiments on RadioMapMotion and real-world datasets demonstrate that RadioCLIP achieves an NMSE of 0.0018 and an RMSE of 0.012 in simulation-domain prediction. After sparse real-domain adaptation, DyTransRM achieves an NMSE of 0.023, RMSE of 0.079, and MAE of 0.064, outperforming representative adaptation baselines without requiring spatially complete real RMs. These results demonstrate the effectiveness of DyTransRM for transferring simulation-learned dynamic propagation knowledge to practical sparse-measurement scenarios.

0.28

Physics-Unrolled Neural Operator for Accelerating High-Fidelity Wireless Ray Tracing

cs.LG cs.AI ·2026-08-19 ·Rafid Umayer Murshed, Saif Ur Rahman, Mingyue Tang, Elahe Soltanaghai
top venuetheoryhot direction similarity 0.62
Abstract · Accepted at NeurIPS 2026 (camera-ready version). 42 pages, 8 figures, 14 tables

Site-specific wireless design relies on ray tracing to predict how signal strength varies across a floorplan, but a converged indoor radio map takes tens of seconds to simulate and planning a single building requires thousands of them. A learned surrogate can remove most of that cost, yet training one runs into a second problem: high-fidelity labels are exactly what is too expensive to produce at scale, so the affordable labels come from finite-ray simulations that carry residual Monte Carlo noise. We address this with RayNO, a physics-unrolled neural operator that reconstructs the converged output of a ray tracer from one cheap low-fidelity run and scene priors. Rather than treating a radio map as a generic image, RayNO refines the field through three stages matched to reflection, diffraction, and scattering, each supervised by a label of matching physical complexity. We prove that when the label error is conditionally unbiased the learned operator can end up closer to the high-fidelity reference than the labels it was trained on, and we verify that condition directly in the simulator using repeated independent ray seeds. Across diverse floorplans, RayNO outperforms image-to-image baselines, wireless learning models, monolithic neural operators, and classical multi-fidelity regression on both image-quality and wireless deployment metrics, while reducing the cost of a high-fidelity map from roughly 28 s to 0.11 s.

0.51

Zero-Shot Frequency Generalization for Radio Map Prediction via Cross-Attention Physics-Residual Learning

eess.SP ·2026-08-17 ·Sajjad Hussain
similarity 0.61
Abstract · Submitted to IEEE Wireless Communications Letters, August 2026

Deep learning models for radio map prediction are trained and tested at the same carriers and cannot serve unseen frequencies. We propose a two-stream network learning a residual over an analytic prior, fusing environment and physics streams by cross-attention. Evaluated at the query frequency, this free-space and knife-edge prior absorbs dominant frequency scaling of pathloss, leaving a residual that varies little across bands. Across 150 ray-traced scenes and four training carriers (1.8--28 GHz), the method reduces RMSE by 35.3% zero-shot at unseen carriers and scenes, and by 37.6% at extrapolated 60 GHz, outperforming interpolated 10 GHz.

0.33

RFWeave: Learning Wireless Propagation Across Scenes and Transceiver Configurations

eess.SP cs.LG ·2026-10-12 ·Shurui Xu, Xiao Ye, Yijie Bian, Junjie Ai, Yuxuan Chen +3 more
similarity 0.61
Abstract · 20 pages, 12 figures, 12 tables, including appendices

Wireless propagation modeling is foundational to the evaluation and design of modern communication systems. To achieve accurate wireless propagation prediction, recent learning-based approaches leverage scene geometry and materials, demonstrating promising generalization across transceiver locations and unseen scenes. However, these approaches remain largely confined to a fixed configuration of array size, receiver orientation, and transmit beam. In this work, we introduce RFWeave, a learned wireless propagation model designed to generalize across scenes, transceiver locations, and transceiver configurations. To accommodate varying array structures, RFWeave incorporates variable-length transceiver tokens that represent antenna elements individually. Furthermore, to capture the geometry between transmit and receive antenna elements, RFWeave aggregates their pairwise spatial relations into propagation tokens. A configuration-conditioned decoder predicts the spatial spectrum and received power. RFWeave is trained on a large-scale simulated dataset spanning 10,000 indoor scenes and more than 5 million channel records under diverse transceiver configurations. Extensive evaluations show that RFWeave achieves state-of-the-art performance across all evaluated generalization settings, improving spatial spectrum structural similarity (SSIM) by up to 15.7% and reducing received power mean absolute error (MAE) by up to 35.4% over the strongest baselines on unseen scenes. Additional experiments on measured DICHASUS data and in beam management further demonstrate RFWeave's broader applicability to real-world channels and downstream wireless tasks.

0.24

Physics-Guided Multi-Objective Deep Learning for Ultrasound RF Data Interpolation in Resource-Constrained Imaging

eess.IV cs.LG ·2026-09-23 ·Luoyuan Zhang, Yiyang You, Ananya Tandri, Yinan Feng, Hyunwoo Song +2 more
similarity 0.60
Abstract · Submitted to the Journal of Computational Design and Engineering

Ultrasound imaging increasingly targets portable, point-of-care, and wearable settings where constraints on power, bandwidth, and hardware complexity often necessitate sparse data acquisition in spatiotemporal scanning. However, image reconstruction using the sparse data can introduce insufficient phase information in coherent beamforming process, resulting in grating-lobe artifacts that degrade imaging contrast resolution. We present a physics-guided, data-driven framework for sparse-to-dense radio-frequency (RF) reconstruction that aligns training with downstream image formation. Our approach trains an end-to-end interpolation network using a hybrid supervision scheme that combines an RF-domain and a beamforming-domain loss with exponential moving average (EMA) to stabilize the multi-objective training. To improve generalization under variable acquisition layouts, we also introduce a random-skip masking strategy that varies sparsity patterns during training so a single model can handle diverse decimation factors and irregular channel configurations. We evaluate the framework on a held-out test set using the mean structural similarity index measure (SSIM) between reconstructed and ground-truth beamformed images. Across decimation factors $\times 2$ to $\times 13$, the best-performing configuration maintains mean SSIM around 0.95. Overall, the results show consistent gains in RF reconstruction and post-beamforming image quality across diverse acquisition conditions. This approach enables robust, high-quality ultrasound imaging at resource-constrained settings by allowing more sparse scanning in spatiotemporal domain.

0.18

Untangling the Geometry and Speed for RF Sensing Spectrograms

eess.SP cs.LG ·2026-09-22 ·Mert Torun, Darius Cuenca, Yasamin Mostofi
similarity 0.60
Abstract

A fundamental challenge in RF sensing is that Doppler signatures observed by a link entangle the target's motion with the sensing geometry, resulting in limited applicability to unconstrained real-world settings. In this paper, we establish a new foundation for physically interpretable RF sensing that disentangles reflector speed from geometry, jointly recovering the speed, geometry factor, relative amplitude, and width of each dominant Doppler ridge. More specifically, we first develop a compact parametric representation of WiFi spectrograms and establish its low-dimensional structure through a systematic computer-vision analysis of a large and diverse human-activity dataset, thereby providing a tractable foundation for learning. Building on this representation, we then design a physics-informed autoencoder whose structured bottleneck and differentiable RF forward model enforce physically meaningful estimates of reflector speed and geometry. We further introduce a synthetic-to-real training framework, eliminating the need for real WiFi training data. We extensively validate the proposed framework under both known and time-varying geometries, using both independently generated synthetic test sets and 31 real WiFi experiments. The results demonstrate the superior performance in speed and geometry extraction, robustly recovering the underlying geometry, speeds, Doppler-ridge amplitudes, and ridge widths across all settings, while substantially outperforming the strongest baselines.

0.10