CS Paper Radar

Prop-WRF: Proposal-Guided Wireless Radiance Field for Scalable Multi-Frequency Outdoor Channel Frequency Response Prediction

Yulin Fu, Jiancun Fan, Shiyu Zhai, Zhibo Duan, Jie Luo

eess.SP ·submitted 2026-11-09 04:06 UTC · v1

Abstract

Sparse-directional wireless radiance fields (WRFs) enable complex channel frequency response (CFR) prediction from receiver locations and multipath direction priors. However, in large-scale outdoor environments, long sampling intervals make it difficult to concentrate a limited sampling budget around valid virtual anchors (VAs), degrading prediction accuracy and training stability. This paper proposes Prop-WRF, a proposalnetwork-guided WRF for CFR prediction across multiple subcarriers. A lightweight proposal network learns VA occupancy densities through online distillation from the main network and iteratively guides resampling toward likely VA locations. The main network then predicts complex radiance over the refined intervals and synthesizes CFRs using an analytical propagation model. By introducing frequency encoding only into the radiance branch, a single model jointly learns shared VA geometry from observations across subcarriers while representing frequencydependent complex radiance. A stage-wise hybrid normalized loss and an interval-weight regularizer further strengthen weakchannel supervision and suppress spurious VA peaks. In addition, a multipath simultaneous localization and mapping (SLAM) front end refines receiver states and path associations to construct geometrically consistent training priors. Simulations show that Prop-WRF improves CFR prediction accuracy and training stability over conventional sparse-directional WRF baselines in larger environments.

Closest papers

Nearest neighbours by meaning across the whole index.

WiNeRF: Measurement Constrained Radiance Fields for Actionable Wireless Channel Modeling

cs.NI cs.LG ·2026-08-24 ·Saif Ur Rahman, Rafid Umayer Murshed, Anton Dmitriev, Cagri Tanriover, Rahul C. Shah +1 more
published similarity 0.70
Abstract · Accepted to EWSN 2026

Wireless embedded systems increasingly rely on wireless channel information for decision making, yet practical platforms operate under severe constraints, including few antennas, narrow bandwidth, and sparse, noisy measurements. While neural field based approaches inspired by Neural Radiance Fields (NeRFs) have recently been explored for continuous wireless channel modeling, existing approaches depend on dense measurements or external priors such as known geometry, visual context, or angle-of-arrival (AoA) information, limiting their practicality in real-world deployments. We present WiNeRF, a neural field framework that learns a spatially continuous, complex-valued wireless channel representation directly from sparse channel state information (CSI) collected by commodity WiFi devices. WiNeRF embeds intrinsic system constraints, such as antenna geometry, limited spatial resolution, and phase uncertainty, as inductive biases through a 3D conical wave sampling model, a multi-resolution implicit scene representation, and a differentiable optimization framework for complex-valued channel learning. Across diverse indoor environments with non-line-of-sight (NLoS) regions, WiNeRF achieves a median prediction SNR of 5.3 dB, outperforming prior neural baselines by 4.9 dB on average (approximately 3x higher prediction SNR), and produces a task-agnostic channel representation that can be directly reused in standard signal-processing pipelines, including beamforming, AoA estimation, and RSSI coverage mapping, without modifying existing hardware or wireless protocols.

0.37

Channel2World: A Wireless Foundation Model for RF Environment Representation

eess.SP ·2026-08-18 ·Hyung-Joo Moon, Joonkyu Jang, Kwang Soon Kim, Seong-Lyun Kim, Robert W. Heath +1 more
similarity 0.66
Abstract · 13 pages, 10 figures

Wireless channels are commonly treated as link-specific observations, although their multipath structure is governed by the surrounding radio-frequency (RF) environment. In this paper, we propose Channel2World, a wireless foundation model that learns a reusable environment-level representation from multiple-input multiple-output (MIMO) channel-position observations. The model aggregates channels collected within the same base-station-centered environment into a wireless world embedding using a Transformer-based encoder. The encoder is pretrained through context-query prediction, where context channels condition user equipment (UE) position and relative path-gain prediction for disjoint query channels. After pretraining, the encoder is frozen and used as a task-agnostic environment-conditioning module for downstream wireless models, enabling adaptation to unseen environments without site-specific fine-tuning. To learn an environment-level latent space that generalizes across deployments, we pretrain Channel2World using ray-tracing data from 26,000 environments, with approximately 5,000 channel measurements per environment. Evaluations on UE localization, beam-domain channel state information (CSI) reconstruction, and RF-observable geometry reconstruction show that the learned embeddings provide effective conditioning in unseen environments. For localization and CSI reconstruction tasks, embedding-based conditioning outperforms or remains competitive with site-specific fine-tuning, although fine-tuning requires task-specific labeled data and additional gradient-based adaptation. The embeddings also support the reconstruction of dominant reflector structures, indicating their utility as reusable environmental priors across tasks.

0.43

RFWM: Physics-Guided World Model for Dynamic Wireless Radiance Field Generation

cs.NI ·2026-08-20 ·Zijiu Yang, Qianqian Yang
benchmarkhot direction similarity 0.65
Abstract

Radio-frequency (RF) radiance-field modeling is essential for wireless network optimization and sensing, yet remains challenging in dynamic and unseen environments. Existing learning-based methods synthesize RF fields from sparse measurements, but most struggle to generalize to dynamic and unseen environments. To address this limitation, we propose RFWM, a physics-guided RF world model that maps multimodal physical conditions like visual dynamics and AP configurations to spatiotemporal RF fields. RFWM adopts a two-stage training strategy with physics-guided priors and constraints. In the first stage, RFWM adapts a pretrained visual diffusion backbone to RF trajectories to predict RF sequences from a few past RF inputs, while conditioning the backbone on a Friis-guided prior for coarse attenuation guidance. In the second stage, RFWM learns the physical-to-RF mapping by training a ControlNet from scratch and fine-tuning the RF-adapted backbone, while six physics-guided regularizers enforce fine-grained propagation consistency. Cross-height heads then jointly generate RF trajectories at queried receiver heights in one forward pass. We construct a new benchmark of 7,715 sequences averaging 33 frames across 115 environments for dynamic RF-field generation. Experimental results show that RFWM improves MSE by approximately 7 dB and 3 dB over the state of the art under in-distribution and out-of-distribution settings, respectively.

0.29

A Foundation Model for Large-Scale Wireless Network Planning , Operation and Optimization

eess.SP ·2026-09-08 ·Xinyu Qin, Wenqiang Pu, Hongcheng Dong, Bingsheng Peng, Ye Xue +4 more
similarity 0.63
Abstract

Wireless cellular networks form the connective tissue of human society, sustained by a continuous physical dialogue between engineered infrastructure and its surroundings. Radio signals emitted from base stations traverse terrain, diffract around buildings and scatter through streets before reaching billions of users. Together, these interactions produce the city-wide radio environment on which every network decision rests. Shaping this environment through deployment and optimization determines the connectivity societies rely on, yet learning it effectively at city scale and generalizing across diverse cities and deployments remain open challenges. Here we answer positively by introducing ChaRT, a foundation model that learns transferable radio representations from measurement reports generated by deployed cellular networks. These reports provide abundant multi-cell, multi-beam observations without dedicated campaigns, forming a scalable data foundation for city-scale learning. ChaRT embeds beam-level angular structure, network hierarchy and propagation-regime diversity in its architecture, and is pretrained through context-aware masked beam modelling and self-distillation with channel-model-constrained augmentation. We pretrain ChaRT on over one billion reports comprising 18.2 billion beam-level observations from 3,503 cells in one city. With a single set of weights, ChaRT reconstructs radio environments in unseen cities and transfers to radio map construction, new-site prediction and network parameter tuning. With only 1% of labelled data, it supports user localization, beam prediction, propagation scenario classification and estimation of the signal-to-interference-plus-noise ratio. The learned representation further enables beamspace clustering for reusable radio-grid construction. These results establish ChaRT as a transferable foundation for network-wide intelligence.

0.09

WiFo-R: Wireless Foundation Model with Recurrent Channel Representation

eess.SP ·2026-11-08 ·Liu Xuanyu, Cao Keyi, Cheng Xiang
similarity 0.61
Abstract

Wireless foundation models learn transferable channel state information (CSI) representations across heterogeneous wireless systems. However, conventional grid-aligned representations couple feature sequence length to CSI dimensions, restricting the allocation of representation capacity to different propagation conditions and task requirements while increasing inference overhead. This paper proposes WiFo-R, a wireless foundation model that learns progressive channel representations with selectable capacity. A channel-query cross-attention encoder aggregates spatial, temporal, and spectral CSI information, while parameter-shared recurrent updates refine existing channel features and introduce additional latent tokens. Multi-mask, multi-depth self-supervised pretraining equips intermediate states with strong reconstruction capabilities, followed by task-aligned post-training for channel estimation and CSI feedback. WiFo-R supports temporal and frequency-domain channel prediction, channel estimation, and variable-rate CSI feedback, and transfers to localization and LoS/NLoS classification. Experiments across in-distribution and out-of-distribution channel configurations demonstrate accurate reconstruction, progressive performance improvements, and strong transferability. A single feedback encoder--decoder supports six payload lengths at fixed quantization precision, while cross-attention and selectable recurrent depth improve the accuracy--complexity trade-off for large-scale CSI observations.

0.23

Wireless Foundation Models: State-of-the-Art and Open Challenges

eess.SP cs.AI ·2026-09-04 ·Alonso M. Pacheco Huachaca, Juan J. Rodriguez Rodriguez, Ahmed Aboulfotouh, Nelson L. S. da Fonseca, Carlos A. Astudillo +1 more
survey similarity 0.61
Abstract

Wireless foundation models (WFMs) have emerged as a promising approach for learning reusable representations from large-scale wireless data and adapting them to downstream tasks. However, the rapidly growing literature remains fragmented across modalities, pretraining objectives, architectures, adaptation strategies, and evaluation protocols, making it difficult to assess progress toward broadly transferable models. This survey provides a systematic analysis of WFMs for physical-layer applications. We first introduce the main WFM design components, including pretraining, backbone architectures, and downstream adaptation. We then organize the literature into five physical-layer task families: signal recognition and demodulation, channel representation learning, RF sensing and localization, beam management, and spectrum sensing and monitoring, while separately examining multi-task PHY models. Across these categories, we analyze how existing models are pretrained, adapted, and evaluated, with particular attention to downstream task diversity and the distinction between in-distribution, partial-shift, and out-of-distribution transfer. Our analysis shows that current WFMs provide increasing evidence of reusable wireless representations, but this evidence varies considerably across task families and evaluation settings. Differences in datasets, modalities, architectures, pretraining objectives, adaptation protocols, and distribution shifts make it difficult to determine which design choices drive transfer and generalization. We conclude by identifying open directions for improving data availability, evaluation rigor, generalization, efficient adaptation, and real-world deployment, providing a unified framework for understanding the current WFM landscape and the requirements for developing more reusable foundation models for future physical-layer wireless systems.

0.20

DyTransRM: A Unified Simulation-to-Real Framework for Dynamic Radio Map Prediction

eess.SP ·2026-11-14 ·Simin Wang, Jiayi Wei, Jihong Li, Guhan Zheng, Rui Cheng +1 more
similarity 0.61
Abstract · 14 pages, 5 figures

Dynamic radio map (RM) prediction enables proactive wireless network control by forecasting future propagation conditions from historical observations. However, collecting temporally continuous and spatially dense real-world RMs is prohibitively expensive, while models trained on large-scale simulated data often suffer from limited transferability to real environments. To address this issue, we propose DyTransRM, a unified simulation-to-real framework for dynamic RM prediction under sparse real-world measurements. DyTransRM first introduces RadioCLIP to learn physics-semantic representations by aligning environmental evolution with the corresponding propagation evolution, thereby improving both prediction accuracy and cross-domain transferability. To further bridge the simulation-to-real gap, SparseUOT employs sparse-mask simulation refinement to mimic realistic measurement patterns and unbalanced optimal transport to selectively align compatible propagation representations across domains. Experiments on RadioMapMotion and real-world datasets demonstrate that RadioCLIP achieves an NMSE of 0.0018 and an RMSE of 0.012 in simulation-domain prediction. After sparse real-domain adaptation, DyTransRM achieves an NMSE of 0.023, RMSE of 0.079, and MAE of 0.064, outperforming representative adaptation baselines without requiring spatially complete real RMs. These results demonstrate the effectiveness of DyTransRM for transferring simulation-learned dynamic propagation knowledge to practical sparse-measurement scenarios.

0.28

Geometry-Informed Neural Network for Pilot-Limited Channel Estimation via Sensing from Uplink Traffic

eess.SP ·2026-10-06 ·Wenyu Huang, Alireza Javid, Nuria González-Prelcic
code/data similarity 0.60
Abstract · This work has been submitted to the IEEE for possible publication

Reliable wireless systems depend on accurate uplink channel estimation for precoding, scheduling, and link adaptation at the base station. In the upper mid-band, wide bandwidths and large antenna arrays increase the channel dimension and make pilot-efficient estimation particularly challenging. While uplink data is available as every user transmits it, sounding resources are shared across all users in the cell, leaving only a few pilots for each user. Thus, channel estimation heavily depends on prior information. Existing approaches obtain such priors in different ways, each with limitations. Ray tracing requires a site model, channel knowledge maps rely on measurements at or near the locations they represent, and learned channel distributions do not explicitly capture propagation geometry. We therefore propose TRaffic-Aided Channel Estimation (TRACE), which builds the prior from uplink traffic without additional sounding. TRACE learns a geometry-aware channel prior from routine multi-UE uplink traffic and combines it with the available pilots for channel estimation. In a ray-traced street canyon at 15 GHz, TRACE achieves -7.48 dB NMSE with 8 pilots, outperforming three state-of-the-art priors and two geometric ablations by more than 3 dB, while remaining effective with only 2 pilots. Within a deployment, TRACE remains robust across SNRs, carrier frequencies, and reduced mapping traffic without retraining.

0.25