CS Paper Radar

PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3

Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte, Dipankar Shakya, Theodore S. Rappaport

eess.SP ·submitted 2026-10-02 18:05 UTC · v2
published

Abstract

Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz, degrading outdoor-to-indoor (O2I) coverage. A reconfigurable intelligent surface (RIS) on a neighboring building bypasses this blockage by focusing energy onto indoor users. This paper introduces PRIMO (Parallel RIS Min-Rate Optimization), a training-free joint optimizer of base-station precoding, RIS phase shifts, and RIS placement, validated by calibrated ray tracing in a MetroTech Commons digital twin (Brooklyn, NY) at 6.75 and 16.95 GHz. At equal physical aperture, half-wavelength spacing packs 6.25 times as many elements per array at FR3 as at FR1(C), so FR1(C) leads at low indoor-user counts while FR3 dominates at higher counts, where the additional spatial degrees of freedom suppress inter-user interference. Above a 1 bps/Hz service floor, PRIMO supports 92% more indoor users at FR3 than at FR1(C), and raises the minimum user rate by up to 90% over a fully converged alternating-optimization baseline while running about 100 times faster.

Comment
5 pages, 3 figures, 3 tables. Presented at the 2026 Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, CA, USA, Oct. 25-28, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Simultaneous Indoor and Outdoor Coverage with Conformal Intelligent Omni-Surface

eess.SP ·2026-08-24 ·Yiqi Chen, Xiaoming She, Jianchi Zhu, Nanxi Li, Ruizhe Long +1 more
similarity 0.60
Abstract

Seamless indoor--outdoor coverage conventionally relies on coordinated outdoor macro cells and indoor small cells, incurring high deployment and backhaul costs. Intelligent omni-surfaces (IOSs) provide a promising alternative by enabling simultaneous reflection and transmission across building boundaries. Enabled by recent advances in conformal antennas, conformal IOSs (CIOSs) mounted on building facades offer a flexible and deployment-friendly solution for integrated indoor--outdoor coverage. This paper develops a stochastic-geometry framework to evaluate the downlink performance of CIOS-assisted networks serving both indoor and outdoor users. Specifically, a building-dependent spatial model is established where randomly located buildings are modeled via a Boolean scheme with CIOSs mounted on their facades. Unlike planar IOS deployment, conformal integration introduces geometry dependent visibility constraints, which are captured through the effective numbers of participating elements defined by visible arc metrics for reflection and transmission. Incorporating these constraints, coverage probability expressions are derived under three CIOS operating protocols. Numerical results show that, compared with planar IOS, CIOS improves the successful connection probabilities of the reflected and transmitted links by up to 75% and 125%, respectively, while the overall coverage gain remains dependent on blockage conditions because curvature reduces the effective serving aperture.

0.18

Learning-Accelerated Joint AP/RIS Optimization for Low-Latency Indoor mmWave XR Networks

cs.NI ·2026-10-24 ·Ali Elghariani, Mohammed Elbamby, Anis Elgabli
published similarity 0.59
Abstract · 6 pages, 6 figures, accepted for presentation in IEEE Globecom 2026

This paper studies a reconfigurable intelligent surface (RIS)-assisted indoor architecture for extended reality (XR) applications, where multiple access points (APs) simultaneously serve multiple users over a shared frequency channel under a centralized AP controller. We formulate a non-convex sum-rate maximization problem with coupled AP precoders and RIS phase shifts, and develop a centralized alternating optimization (AO) framework for joint design. We rigorously prove that the proposed AO guarantees monotonic improvement of the sum rate that converges to a coordinate-wise stationary point, despite the non-convexity of the resulting subproblems. Although AO provides reliable performance, its iterative nature limits real-time applicability as the system dimension grows. To overcome this limitation, we propose a supervised learning-assisted approach that leverages AO-generated solutions to significantly accelerate convergence. Simulation results demonstrate that the proposed framework achieves near-optimal performance with substantially fewer AO iterations, which makes it well-suited for latency-critical RIS-assisted XR deployments.

0.31

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.58
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

eess.SP ·2026-09-05 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +3 more
similarity 0.58
Abstract · 6 pages, 4 figures

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

0.19

RIS-Assisted Downlink Pinching-Antenna Systems With NLOS Environments

eess.SP ·2026-10-25 ·Yue Geng, Kah Chan Teh, Tee Hiang Cheng
similarity 0.58
Abstract · 6 pages, 4 figures

This paper investigates a reconfigurable intelligent surface (RIS)-assisted downlink pinching-antenna system (PASS) in the presence of non-line-of-sight (NLOS) users caused by unavoidable obstacles. An RIS is deployed to extend the coverage of the physically constrained PASS by establishing virtual line-of-sight (LOS) links. To improve system performance, we propose a zero-forcing (ZF) beamforming-based alternating optimization (AO) framework that minimizes the transmit power by jointly optimizing the RIS reflection coefficients and pinching-antenna (PA) activation positions. Specifically, the RIS reflection coefficients are optimized using the Riemannian conjugate gradient (RCG) method, while a novel projected gradient-based method is developed to efficiently optimize the PA activation positions. Simulation results demonstrate that the proposed AO framework outperforms baseline schemes in terms of both transmit power and computational efficiency under different system configurations including the rate requirements and RIS sizes.

0.16

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.57
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29

Scaling Cheap Synthetic Pretraining Improves Indoor Radio-Map Prediction

cs.LG cs.AI ·2026-10-13 ·Khoren Petrosyan, Artashes Mkrtchyan, Rafayel Mkrtchyan, Hrant Khachatrian, Theofanis P. Raptis
top venuebenchmarkcode/data similarity 0.57
Abstract · Accepted at NeurIPS 2026. This research was in part sponsored by the HESC MESCS RA grant No. 22rl-052 (DISTAL), and by the NATO Science for …

Real measurements are too limited to train an accurate indoor pathloss predictor that works across a wide range of buildings. Large-scale synthetic pretraining offers a way forward, but real building layouts are also scarce, and accurate ray-tracing simulators are slow, expensive, and often proprietary. We address both problems by introducing a generator that automatically creates diverse indoor layouts and a fast, open-source approximate ray tracer that computes radio maps for them. Using this pipeline, we generate 128M synthetic samples, pretrain ResNet-101 and Swin-T encoder-decoders, and fine-tune them on high-quality benchmark data. Despite simulator mismatch, our ResNet-101 model reduces error by 15% on average relative to the best known methods across five indoor radio-map prediction tasks and improves transfer on a small real-measurement dataset. Both architectures show predictable data-scaling trends: power laws fitted on 2M-16M samples predict the mean normalized downstream RMSE at 32M-128M with 3.33% mean absolute percentage error for ResNet-101 and 7.10% for Swin-T. These results show that pretraining on large amounts of cheap simulated data can improve indoor radio-map prediction, even when real measurements and high-quality simulations are limited.

0.38

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.56
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56