CS Paper Radar

Simultaneous Indoor and Outdoor Coverage with Conformal Intelligent Omni-Surface

Yiqi Chen, Xiaoming She, Jianchi Zhu, Nanxi Li, Ruizhe Long, Ying-Chang Liang

eess.SP ·submitted 2026-08-24 09:17 UTC · v1

Abstract

Seamless indoor--outdoor coverage conventionally relies on coordinated outdoor macro cells and indoor small cells, incurring high deployment and backhaul costs. Intelligent omni-surfaces (IOSs) provide a promising alternative by enabling simultaneous reflection and transmission across building boundaries. Enabled by recent advances in conformal antennas, conformal IOSs (CIOSs) mounted on building facades offer a flexible and deployment-friendly solution for integrated indoor--outdoor coverage. This paper develops a stochastic-geometry framework to evaluate the downlink performance of CIOS-assisted networks serving both indoor and outdoor users. Specifically, a building-dependent spatial model is established where randomly located buildings are modeled via a Boolean scheme with CIOSs mounted on their facades. Unlike planar IOS deployment, conformal integration introduces geometry dependent visibility constraints, which are captured through the effective numbers of participating elements defined by visible arc metrics for reflection and transmission. Incorporating these constraints, coverage probability expressions are derived under three CIOS operating protocols. Numerical results show that, compared with planar IOS, CIOS improves the successful connection probabilities of the reflected and transmitted links by up to 75% and 125%, respectively, while the overall coverage gain remains dependent on blockage conditions because curvature reduces the effective serving aperture.

Closest papers

Nearest neighbours by meaning across the whole index.

Coverage Analysis of Large-Scale HAPS Networks Using Directional Beams

eess.SP ·2026-08-15 ·Zhengying Lou, Baha Eddine Youcef Belmekki, Mohamed-Slim Alouini
top venuehighly cited similarity 0.62
Abstract

High-altitude platform stations (HAPS) are pivotal in next-generation wireless networks for reducing core network burdens and enabling cost-effective communication. In this article, we propose a spherical stochastic geometry-based analytical framework for the coverage performance evaluation of HAPS networks. Considering the significant influence of directional antenna gain on interference evaluation, we analyze coverage performance under a general channel model that accommodates various beam patterns. Analytical expressions of the uplink and downlink coverage probabilities in cellular and cell-free networks are provided respectively and their accuracy are verified by Monte Carlo simulation. Furthermore, the influences of network-level and physical-level parameters on coverage probability are studied. Finally, several factors that align with the analytical framework of this article are discussed.

0.69

OpenRIS: Democratizing reconfigurable intelligent surfaces for real-world wireless enhancements

eess.SP ·2026-08-10 ·Weicong Chen, Junjie Ai, Lin Bai, Xiaokun Teng, Wen Jun Teng +5 more
code/data similarity 0.62
Abstract · This manuscript has been submitted for possible publication

Wireless enhancement is critical for next-generation mobile communication systems to realize seamless connectivity, yet traditional network expansion strategies are becoming economically unsustainable. Reconfigurable intelligent surfaces (RISs) provide a promising alternative by improving signal utilization. However, high hardware and deployment costs of advanced RISs limit their large-scale application. Here, we democratize this technology with OpenRIS, an open-source and low-cost platform composed of Lego-like meta-bricks. With digital-twin assistance, these meta-bricks can be flexibly assembled into arbitrary shapes to achieve customized, mass-deployable wireless enhancement without extra power. Experiments and full-wave simulations verify that the discretized OpenRIS achieves consistent performance with the continuous RIS. We further develop a dual-user wireless transmission system and a three-dimensional coverage measurement system to showcase the versatile applicability of OpenRIS in wireless enhancements. As a plug-and-play solution, OpenRIS accelerates the translation of RIS theory into practice and is poised to integrate into infrastructure, reshaping the future wireless world as steel and concrete shape modern cities.

0.20

PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3

eess.SP ·2026-10-02 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +2 more
published similarity 0.60
Abstract · 5 pages, 3 figures, 3 tables. Presented at the 2026 Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, CA, USA, Oct. 25-…

Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz, degrading outdoor-to-indoor (O2I) coverage. A reconfigurable intelligent surface (RIS) on a neighboring building bypasses this blockage by focusing energy onto indoor users. This paper introduces PRIMO (Parallel RIS Min-Rate Optimization), a training-free joint optimizer of base-station precoding, RIS phase shifts, and RIS placement, validated by calibrated ray tracing in a MetroTech Commons digital twin (Brooklyn, NY) at 6.75 and 16.95 GHz. At equal physical aperture, half-wavelength spacing packs 6.25 times as many elements per array at FR3 as at FR1(C), so FR1(C) leads at low indoor-user counts while FR3 dominates at higher counts, where the additional spatial degrees of freedom suppress inter-user interference. Above a 1 bps/Hz service floor, PRIMO supports 92% more indoor users at FR3 than at FR1(C), and raises the minimum user rate by up to 90% over a fully converged alternating-optimization baseline while running about 100 times faster.

0.38

Towards Environment-Aware 6G Network Planning: An Any-to-Any Channel Knowledge Map Approach

eess.SP ·2026-11-18 ·Yilong Chen, Jiaxuan Li, Yuan Guo, Wenhai Lai, Xinhao Li +5 more
similarity 0.59
Abstract

Planning sixth-generation (6G) networks for reliable coverage across diverse environments is challenging, as it requires channel knowledge between candidate network node locations and potential service regions. This article proposes an environment-aware network planning framework based on any-to-any (X2X) channel knowledge maps (CKMs), which characterize channels between arbitrary transmitter-receiver location pairs. Within this framework, we first construct X2X CKMs from environmental information, sparse channel measurements, or both, with map types and spatial resolutions selected according to the planning task. We then use these maps to predict coverage and optimize network deployment and configuration subject to service requirements and practical constraints, while accounting for subsequent network operation. Finally, field measurements assess channel prediction accuracy and deployment performance, providing feedback for CKM correction and deployment refinement. We discuss implementation methods and tradeoffs across these stages. Case studies illustrate the effectiveness of the framework for indoor intelligent reflecting surface (IRS) deployment and outdoor base station (BS) deployment. Live-network trials further demonstrate coverage gains from IRS deployment and BS reconfiguration, with measurement feedback supporting CKM calibration and configuration refinement.

0.16

Intelligent Reflecting Surface Deployment for Low-Altitude Coverage: Illumination Geometry, Directional Characteristics, and Optimization

cs.IT ·2026-08-31 ·Guoying Zhang, Qingqing Wu, Ailing Zheng, Xingxiang Peng, Wen Chen +1 more
theory similarity 0.58
Abstract · Submitted to an IEEE journal for possible publication

Terrestrial base stations (BSs) are typically configured with fixed downtilt to serve ground users, resulting in weak illumination of low-altitude airspace even under line-of-sight (LoS) propagation. In this paper, we establish a channel model that incorporates BS and intelligent reflecting surface (IRS) radiation patterns for three-dimensional (3D) low-altitude coverage while preserving the existing BS configuration. We formulate a budget-constrained IRS deployment problem that jointly determines candidate-site selection, IRS orientations, and phase shifts to maximize the worst-case signal-to-noise ratio (SNR) over the 3D low-altitude airspace. The selected sites and optimized IRS parameters remain fixed after deployment, yielding a quasi-static IRS configuration. We characterize the illumination geometry between the fixed-downtilt BS and rooftop candidates by deriving the nonnegative installation-height range satisfying the BS main-lobe condition. The separation between the mapped main-lobe height boundaries grows linearly with horizontal BS-to-site distance and decreases inversely with the number of BS antennas. We further derive an analytical lower bound on the regional worst-case normalized array gain achievable through IRS phase design over served directions with different direction spans. The resulting sufficient direction span decreases inversely with the square root of the number of IRS elements when the same worst-case normalized gain guarantee is maintained. We develop a mixed-integer alternating optimization (AO) algorithm to solve the resulting problem. Simulation results validate the analytical characterizations and show that the proposed scheme achieves higher worst-case SNR than benchmarks across different deployment budgets.

0.19

Joint Communication and Sensing in Aerial Corridors: A Novel Stochastic Geometry Framework

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon
published similarity 0.56
Abstract · accepted for presentation in 2026 IEEE GLOBECOM

In unmanned aerial vehicle (UAVs) networks, joint communication and sensing (JCAS) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. Within this framework, aerial corridors provide a structured environment for supporting coordinated and reliable operations. In this paper, a comprehensive frame- work is presented to investigate the JCAS coverage probability (CP) of a UAV-base station (BS) in an aerial corridor populated by UAV-user equipments (UEs). The corridor is modeled as a finite cylinder, within which a fixed number of UAV-UEs are spatially distributed according to a three-dimensional (3D) binomial point process (BPP). The UAV-BS is assumed to be equipped with a realistic 3D third generation partnership project (3GPP) antenna pattern and exploits radar sensing capabilities to track a known UAV-UE. Subsequently, the tracked UAV-UE is assumed to perform uplink communication with the UAV-BS. Accordingly, the JCAS CP at the UAV-BS is analyzed under the presence of clutter and uplink communication interference, and exact-form analytical expressions are derived. To the best of our knowledge, this is the first work to develop a stochastic geometry framework for the rigorous analysis of JCAS performance in aerial corridors, with UAV-UE locations modeled as a 3D BPP. Among several insights, results show that increasing the directivity of the UAV-BS antenna beams leads to notable JCAS performance gains, particularly for shorter UAV corridors.

0.52

Site-Specific Cell Shaping: An Agentic Framework

eess.SY ·2026-11-14 ·Zhuo Xu, Zhaolin Wang, Yuanwei Liu
benchmark similarity 0.54
Abstract

An agentic framework is proposed for cell shaping in future sixth-generation (6G) wireless network planning. Cell shaping controls the coverage and interferences of base stations (BSs) through antenna parameters configuration, providing an important means of improving coverage. In contrast to conventional approaches that reply on costly performance evaluations, the proposed framework achieves intelligent and efficient antenna configuration through a perception-reasoning-reflection loop. Specifically, a Configuration Agent combines scene information, evaluation history, and reflection feedback to generate antenna configuration proposals. Then, a ray tracing(RT)-based evaluator assesses these proposals and returns a structured performance summary. Next, a Reflection Agent interprets these results to diagnose site-specific performance deficiencies, recommend feasible configuration adjustments, and accumulate conditional experience. Through this iterative process, the framework accumulates site-specific experience and progressively refines antenna configurations without human-in-the-loop intervention. Simulations in real-world urban scenarios demonstrate that the proposed framework achieves lower outage probabilities than the considered benchmark methods, highlighting the effectiveness of agentic reasoning and reflection in translating site-specific performance feedback and accumulated experience into adaptive antenna configuration decisions.

0.16

Missed Interferers in Ray-Traced Radio Maps: A Digital-Twin and Stochastic Geometry Study of Aerial Coverage

eess.SP cs.PF ·2026-11-07 ·Saad Masrur, Ismail Guvenc
similarity 0.54
Abstract · Under Review

Ray-traced digital twins are increasingly used to plan where cellular-connected uncrewed aerial vehicles (UAVs) can fly. In this paper, we build a Sionna RT digital twin around Raleigh, NC, with 18,591 buildings and two overlapping sub-1 GHz operator networks, and study the downlink signal-to-interference-plus-noise ratio (SINR) of UAVs at 40-300 m. We show that the Monte Carlo radio-map solver of Sionna RT misses distant line-of-sight (LOS) interferers on aerial planes. With $10^7$ rays per sector and 5 m cells, it therefore underestimates the coverage at low SINR thresholds and overestimates it at high thresholds, by up to 26 percentage points at $\pm$2 dB and 50-100 m. Using a LOS-aware deterministic engine validated with Sionna's path solver, we then develop a stochastic geometry model with strongest-sector association and own-site leakage that matches the engine without fitting. The analysis shows that the interference grows logarithmically with the modeled network radius, so a twin that omits distant LOS sites overestimates the coverage, and that altitude mainly reduces the coverage at high SINR thresholds. Finally, selecting the better of two operators raises the minimum SINR along the best corridor by 1.0-3.9 dB up to 100 m.

0.25