CS Paper Radar

Missed Interferers in Ray-Traced Radio Maps: A Digital-Twin and Stochastic Geometry Study of Aerial Coverage

Saad Masrur, Ismail Guvenc

eess.SP cs.PF ·submitted 2026-11-07 17:35 UTC · v1

Abstract

Ray-traced digital twins are increasingly used to plan where cellular-connected uncrewed aerial vehicles (UAVs) can fly. In this paper, we build a Sionna RT digital twin around Raleigh, NC, with 18,591 buildings and two overlapping sub-1 GHz operator networks, and study the downlink signal-to-interference-plus-noise ratio (SINR) of UAVs at 40-300 m. We show that the Monte Carlo radio-map solver of Sionna RT misses distant line-of-sight (LOS) interferers on aerial planes. With $10^7$ rays per sector and 5 m cells, it therefore underestimates the coverage at low SINR thresholds and overestimates it at high thresholds, by up to 26 percentage points at $\pm$2 dB and 50-100 m. Using a LOS-aware deterministic engine validated with Sionna's path solver, we then develop a stochastic geometry model with strongest-sector association and own-site leakage that matches the engine without fitting. The analysis shows that the interference grows logarithmically with the modeled network radius, so a twin that omits distant LOS sites overestimates the coverage, and that altitude mainly reduces the coverage at high SINR thresholds. Finally, selecting the better of two operators raises the minimum SINR along the best corridor by 1.0-3.9 dB up to 100 m.

Comment
Under Review

Closest papers

Nearest neighbours by meaning across the whole index.

Cost of Decibel-Domain Averaging of Line-of-Sight States in Aerial Coverage Analysis

eess.SP ·2026-11-12 ·Ismail Guvenc
similarity 0.64
Abstract · 5 pages, 2 figures, 2 tables

Uncrewed aerial vehicle (UAV) coverage studies routinely average the line-of-sight (LoS) and non-line-of-sight (NLoS) path loss in the decibel domain, weighted by their probabilities. Since the conditional path-loss distribution is bimodal, the resulting mean path loss describes no physical link. We give the error of this mean path loss, relative to the path loss that corresponds to the mean received power, in closed form. We quantify it by ray tracing an ITU-R P.1410 city, supplying the averaged model with the exact LoS probability so that no parameter error contributes. Our numerical results show that the averaged path loss is 6.6 dB higher than the path loss of the mean received power and lies within 2 dB of only 6.2% of the links. It moves the coverage-optimal altitude from 1764 m to 778 m and understates the outage probability by up to 0.198.

0.24

ARCTAN: Arbitrary RF Containment Using Tactical Aerial Networks and Differentiable Ray Tracing

eess.SP cs.NI ·2026-09-30 ·Samuel Rivera, Zhihui Gao, Yiming Li, Tingjun Chen
published similarity 0.63
Abstract · To appear in the Proceedings of the 2026 IEEE Military Communications Conference (MILCOM)

Aerial base stations (ABSs) can rapidly establish connectivity in ad hoc, infrastructure-deprived environments, but their broadcast, line-of-sight transmissions leak far beyond the intended service area, exposing communications to passive eavesdropping and interference. Prior physical layer defenses based on cooperative jamming typically assume known eavesdropper locations, simplified statistical channels, or continuously repositioned jammers. We instead pose the problem as a radio frequency (RF) containment: confining usable signal to a user-defined, arbitrarily-shaped target zone while denying it elsewhere independent of eavesdropper location. We present ARCTAN, a gradient-based optimization framework that jointly optimizes the position, orientation, and transmit power of stationary ABSs and cooperative jammers (CJs) by backpropagating through site-specific, differentiable 3D ray traced channels. Evaluated in a high-fidelity digital twin across three target zone geometries, ARCTAN achieves a mean in-zone SINR of approximately 10 dB while reducing mean out-of-zone SINR from 13-16 dB to -3-5 dB, and suppressing signal-leakage ratios from over 93% to below 46% requiring at most 10 of 12 candidate CJs.

0.29

Beyond RSRP Coverage: UAV Serviceability in Interference-Limited Urban 5G NR Networks

eess.SY ·2026-09-18 ·Md Sharif Hossen, Vijay K. Shah, Ismail Guvenc
similarity 0.61
Abstract · 6 pages, 4 figures

Reference signal received power (RSRP) is commonly used to assess 5G cellular coverage, but it may substantially overestimate the connectivity available to cellular-connected unmanned aerial vehicles (UAVs) under strong inter-cell interference (ICI). As a UAV ascends, reduced blockage can strengthen the serving signal, while increased line-of-sight visibility to neighboring sectors can intensify ICI. This paper develops a trajectory-aware, 3GPP-based system-level framework for evaluating UAV radio serviceability during a three-dimensional flight in an urban 5G New Radio network. The framework jointly evaluates RSRP, reference signal received quality (RSRQ), and signal-to-interference-plus-noise ratio (SINR) in a 19-site, 57-sector deployment. We introduce the concept of coverage-serviceability gap to quantify the difference between RSRP availability and joint service availability. Under RSRP, RSRQ, and SINR thresholds of -100 dBm, -18 dB, and 0 dB, respectively, an inter-site distance (ISD) of 500 m provides 99.9% RSRP availability but only 13.6% joint service availability, yielding a coverage-serviceability gap of 86.3 percentage points. With RSRQ and SINR thresholds of -22 dB and -6 dB, respectively, joint availability increases to 55.0% and 63.1% for ISDs of 500 m and 1000 m, respectively. These results demonstrate that RSRP-based coverage substantially overestimates joint UAV serviceability under both evaluation configurations, with SINR remaining the limiting metric.

0.44

Geometry-Aware Multi-UAV Full-Duplex Communication: System Design and Experiment

cs.IT ·2026-09-27 ·Tao Yu, Kiyomichi Araki, Tomohiro Mogi, Yasushi Hada, Kei Sakaguchi
published similarity 0.61
Abstract · accepted by IEEE Transactions on Vehicular Technology

The deployment of unmanned aerial vehicle (UAV) systems relies on high-performance yet lightweight wireless links between UAVs and ground stations (GSs). This paper presents a geometry-aware multi-UAV in-band full-duplex (MU-IBFD) communication system that uses high-gain directional antennas and separated uplink/downlink channels to convert self-interference into controllable co-channel interference (CCI) between UAVs, thereby avoiding energy-intensive self-interference cancelers on UAVs. We also derive a geometry-aware CCI model and define a reliable operating region (ROR) in the 3D airspace, within which the SINR requirement is satisfied. A prototype consisting of two UAVs and a GS is developed, and field trials are conducted. The measured CCI as a function of UAV positions agrees well with the theoretically predicted non-ROR region, and the downlink capacity significantly exceeds that of a conventional time-division duplex (TDD) with omni-directional scheme and higher transmit power and approaches that of ideal IBFD in most of the airspace. A proof-of-concept 4K/60p video transmission further demonstrates the practical potential of the proposed MU-IBFD system.

0.34

Quantifying the Reality Gap for RL-Based UAV Placement at mmWave and Sub-THz

eess.SY ·2026-09-10 ·Abdullateef Almohamad, Mostafa Ibrahim, Sabit Ekin, Khalid Qaraqe
published similarity 0.61
Abstract · To be published in IEEE GLOBECOM 2026

Reinforcement learning (RL) policies for unmanned aerial vehicle (UAV) placement in mmWave and sub-terahertz networks are typically trained on simplified analytical channels. We quantify the resulting sim-to-real gap on a real urban map of Doha, Qatar, at carriers {28, 140, 183, 300} GHz and altitudes {50, 75, 100, 125} m, evaluating three channel pipelines: an analytical model (FSPL + atmospheric absorption + cuboid LoS), full Monte-Carlo ray tracing in Sionna RT with ITU-R P.676-13 absorption, and a deterministic-LoS hybrid that reuses Sionna's mesh under a closed-form path-gain expression. We formalize the gap on the spatial SNR distribution via four metrics, namely bias, RMSE, Jensen-Shannon divergence, and optimum-deployment displacement. Three findings emerge: at 28/140 GHz, $\sim$70% of the apparent -5.6/-4.8 dB Sionna bias is Monte-Carlo undersampling and shrinks to -1.7/-1.5 dB after mitigation; at 183 GHz a -9.2 dB residual isolates the atmospheric absorption / ITU-R P.676 line-shape disagreement; at 300 GHz the stochastic ray tracer agrees with the analytical model only coincidentally, with a +3.8 dB structural offset exposed by the deterministic-LoS pipeline. Across all carriers the linear-domain regret of the analytical-trained policy stays $\geq$ 0.93, indicating practical near-optimality but with a carrier-resolved SNR bias that warrants explicit reporting.

0.34

AI-Enabled Wireless Propagation Modeling and Radio Environment Maps for 5G Aerial Wireless Networks

eess.SP ·2026-09-22 ·Gautham Reddy, Kürşat Tekbıyık, Bryton Petersen, Antoine Lesage-Landry, Gunes Karabulut Kurt +1 more
published similarity 0.59
Abstract · Submitted for possible publication in IEEE JSTEAP

With the gaining prominence of aerial mobility applications, their success depends on the seamless integration of terrestrial and non-terrestrial network connectivity. However, providing reliable connectivity from terrestrial telecommunication networks remains challenging due to multi-cell interference from base stations (BSs) under line-of-sight (LoS) conditions to unmanned aerial vehicles (UAVs), coverage holes caused by antenna sidelobe degradation, localized multipath fading effects, and the high-speed dynamics of aerial users. To model such complexities, often exacerbated by sparse real-world data, this work proposes a dual-stage radio environment map (REM) framework. Our approach physically decouples the channel modeling, where a spatial Transformer first anchors the deterministic, large-scale path loss geometry, while a gated recurrent unit (GRU) subsequently extrapolates the stochastic, localized fast- fading deviations. By reformulating 3D spatial interpolation as a 1D radial sequence prediction task, the framework inherently aligns with the physics of propagation. We evaluate the proposed framework against state-of-the-art baselines, including 3D Kriging, UNet, Mamba, and Inception, using empirical 5G datasets. The results demonstrate improved intra-site generalization across diverse altitudes, user dynamics, and reference signal received power (RSRP) datasets, achieving signal-strength predictions with errors near 3 dB and REM spatial-similarity indices exceeding 0.75. Finally, we examine the influence of REMs and channel rank conditions on UAV channel quality, underscoring the necessity of reliable channel modeling for robust aerial connectivity.

0.33

Vehicle and UAV Detection and Tracking with LTE Downlink Reference Signals: A Ray-Traced Evaluation on a Mapped Suburban Site with Licensed Base-Station Records

cs.NI ·2026-11-01 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.59
Abstract · 18 pages, 7 figures, 14 tables. Revised version

Passive sensing on the cellular downlink places the receiver at the user equipment and changes nothing in the network. We report simulation results for an LTE band-3 cell-specific reference signal arm on a ray-traced channel. On a synthetic street canyon the arm is compared with an uplink sounding reference signal arm on the same band, target and scorer: missed-detection probabilities of 0.667 and 0.772. On a surveyed site built from OpenStreetMap footprints and the licensed site record, nine receiver positions along the street track the vehicle at coverage between 29.9 % and 61.7 %; a 283 m lap separates target height from trajectory at 1.6 to 30 m; a 137 m lap on the built-up street tracks a vehicle and a 15 m airborne target on every cell, and 8 receivers at 135 m spacing carry one illuminator's coverage over 1140 m of the street. Potential future work includes extending the analysis to multiple illuminators and varying receiver configurations, and confirmation through over-the-air measurements.

0.34

Coverage Analysis of Large-Scale HAPS Networks Using Directional Beams

eess.SP ·2026-08-15 ·Zhengying Lou, Baha Eddine Youcef Belmekki, Mohamed-Slim Alouini
top venuehighly cited similarity 0.58
Abstract

High-altitude platform stations (HAPS) are pivotal in next-generation wireless networks for reducing core network burdens and enabling cost-effective communication. In this article, we propose a spherical stochastic geometry-based analytical framework for the coverage performance evaluation of HAPS networks. Considering the significant influence of directional antenna gain on interference evaluation, we analyze coverage performance under a general channel model that accommodates various beam patterns. Analytical expressions of the uplink and downlink coverage probabilities in cellular and cell-free networks are provided respectively and their accuracy are verified by Monte Carlo simulation. Furthermore, the influences of network-level and physical-level parameters on coverage probability are studied. Finally, several factors that align with the analytical framework of this article are discussed.

0.69