CS Paper Radar

Towards Environment-Aware 6G Network Planning: An Any-to-Any Channel Knowledge Map Approach

Yilong Chen, Jiaxuan Li, Yuan Guo, Wenhai Lai, Xinhao Li, Kaiming Shen, Guangxu Zhu, Jie Xu, Rui Zhang, Zhi-Quan Luo

eess.SP ·submitted 2026-11-18 02:30 UTC · v1

Abstract

Planning sixth-generation (6G) networks for reliable coverage across diverse environments is challenging, as it requires channel knowledge between candidate network node locations and potential service regions. This article proposes an environment-aware network planning framework based on any-to-any (X2X) channel knowledge maps (CKMs), which characterize channels between arbitrary transmitter-receiver location pairs. Within this framework, we first construct X2X CKMs from environmental information, sparse channel measurements, or both, with map types and spatial resolutions selected according to the planning task. We then use these maps to predict coverage and optimize network deployment and configuration subject to service requirements and practical constraints, while accounting for subsequent network operation. Finally, field measurements assess channel prediction accuracy and deployment performance, providing feedback for CKM correction and deployment refinement. We discuss implementation methods and tradeoffs across these stages. Case studies illustrate the effectiveness of the framework for indoor intelligent reflecting surface (IRS) deployment and outdoor base station (BS) deployment. Live-network trials further demonstrate coverage gains from IRS deployment and BS reconfiguration, with measurement feedback supporting CKM calibration and configuration refinement.

Closest papers

Nearest neighbours by meaning across the whole index.

Synergizing CKM and ISAC for Environment-Aware Wireless Networks

eess.SP ·2026-11-08 ·Juncong Zhou, Yilong Chen, Yuan Guo, Zixiang Ren, Han Hu +2 more
survey similarity 0.69
Abstract

Channel knowledge map (CKM) and integrated sensing and communications (ISAC) have emerged as two key technologies for sixth-generation (6G) and beyond wireless networks, enabling a new paradigm toward environment-aware system design. CKMs provide static or stochastic wireless environment information a priori by learning location-dependent mappings from transceiver positions to channel knowledge of various types, whereas ISAC exploits wireless signals to sense environmental objects in real time. CKM and ISAC have primarily been studied separately in prior works, while their integration offers a promising approach for enhancing the environment awareness of 6G networks and further improving both sensing and communication capabilities. On the one hand, sensing can support CKM construction by providing location-tagged measurements and richer environmental observations, while also enabling real-time CKM refinement in dynamic environments. On the other hand, CKM can enhance sensing by offering prior environmental information for clutter mitigation, and CKM and sensing information can be jointly leveraged to improve communications. This article provides an overview of the complementary interactions between CKMs and ISAC, with particular emphasis on three design approaches: sensing-assisted CKM construction and refinement, CKM-assisted sensing, and joint CKM- and sensing-enhanced communications. We also discuss future research directions for achieving environment-aware wireless networks.

0.26

Universal CKM for Environment-Aware Wireless Networks: Enabling Cross-Device and Cross-Task Channel Knowledge Transfer

cs.IT ·2026-08-18 ·Haiquan Lu, Yong Zeng, Cheng-Xiang Wang, Xiqi Gao, Rui Zhang
published similarity 0.66
Abstract

Channel knowledge map (CKM) is a promising technology for environment-aware sixth-generation (6G) wireless networks. However, existing CKMs are tightly coupled with wireless devices and downstream tasks, which limit their scalability and reusability in wireless networks. To address these limitations, this article proposes the concept of universal CKM (uCKM) as a foundational wireless environment prior, which aims to enable cross-device and cross-task channel knowledge transfer for environment-aware wireless networks. We first revisit the representative CKMs and discuss their limitations. Then, the uCKM-enabled new paradigm for environment-aware wireless networks is introduced, and its benefits are highlighted from the perspectives of uCKM construction and utilization phases, for which we propose the visions of ``All for uCKM'' and ``uCKM for All'', i.e., the data acquired by all devices and tasks should contribute to the construction of uCKM, while the constructed uCKM, in turn, can be utilized to support all devices and tasks. Subsequently, we discuss the main challenges of uCKM and propose potential solutions. Last, we provide simulation results to demonstrate the feasibility and performance gains brought by uCKM and outline future research directions.

0.45

Site-Specific Cell Shaping: An Agentic Framework

eess.SY ·2026-11-14 ·Zhuo Xu, Zhaolin Wang, Yuanwei Liu
benchmark similarity 0.64
Abstract

An agentic framework is proposed for cell shaping in future sixth-generation (6G) wireless network planning. Cell shaping controls the coverage and interferences of base stations (BSs) through antenna parameters configuration, providing an important means of improving coverage. In contrast to conventional approaches that reply on costly performance evaluations, the proposed framework achieves intelligent and efficient antenna configuration through a perception-reasoning-reflection loop. Specifically, a Configuration Agent combines scene information, evaluation history, and reflection feedback to generate antenna configuration proposals. Then, a ray tracing(RT)-based evaluator assesses these proposals and returns a structured performance summary. Next, a Reflection Agent interprets these results to diagnose site-specific performance deficiencies, recommend feasible configuration adjustments, and accumulate conditional experience. Through this iterative process, the framework accumulates site-specific experience and progressively refines antenna configurations without human-in-the-loop intervention. Simulations in real-world urban scenarios demonstrate that the proposed framework achieves lower outage probabilities than the considered benchmark methods, highlighting the effectiveness of agentic reasoning and reflection in translating site-specific performance feedback and accumulated experience into adaptive antenna configuration decisions.

0.16

A New Paradigm of 6G Networks: Proactive Channel Cognition and Reconfiguration

eess.SP ·2026-08-30 ·Wenyan Ma, Zixiang Ren, Weitong Zhai, Ge Yan, Lipeng Zhu +2 more
survey similarity 0.61
Abstract

The sixth-generation (6G) wireless networks are expected to enable the deep integration of communication, sensing, computing, control, and intelligence in highly dynamic environments. This evolution drives a fundamental transition from conventional passive channel adaptation to proactive channel cognition and reconfiguration, wherein wireless channels are no longer regarded as uncontrollable propagation media but as network resources that can be learned, predicted, and actively reconfigured. This paper presents a comprehensive overview of this emerging paradigm. We first review channel cognition through the channel knowledge map (CKM) as a systematic framework for learning and exploiting channel characteristics across space, time, and frequency domain. The definitions, construction methods, and applications in wireless networks of CKMs are comprehensively reviewed. Building upon channel cognition, we then review channel reconfiguration technologies from two complementary perspectives: transceiver-side reconfiguration enabled by movable antennas (MAs) and environment-side reconfiguration enabled by intelligent reflecting surfaces (IRSs). For both MA- and IRS-enabled wireless systems, we review their architectures, performance advantages, and key design challenges. Finally, we discuss several promising research directions to inspire further innovations in this burgeoning field.

0.15

Joint Air Corridor and BS Coverage Planning for Large-Scale High-Density Low-Altitude Aerial Networks via Channel Knowledge Maps

eess.SP ·2026-11-10 ·Jiaxuan Li, Yilong Chen, Yuan Guo, Fan Liu, Jie Xu
similarity 0.60
Abstract

This paper studies the joint air corridor and base station (BS) coverage planning problem for high-density low-altitude aerial networks supported by terrestrial cellular infrastructures. In the considered system, unmanned aerial vehicles (UAVs) operate within a structured air corridor planned over a grid-based airspace, and each BS serves selected corridor grid cells by sharing its communication resources among all UAVs therein. Each BS's traffic load depends on both the number of covered corridor cells and the UAV density, thereby affecting the communication rate available to each UAV. We exploit the channel knowledge map (CKM) to characterize the channel gains between BSs and candidate airspace cells and evaluate desired signals and inter-cell interference for environment-aware offline planning. Based on CKM, we jointly optimize the corridor layout and BS coverage to minimize a weighted objective balancing corridor length and the supportable average UAV density along the entire corridor, subject to minimum communication rate requirements for all UAVs along the air corridor. The joint design is formulated as a mixed-integer linear program (MILP), which can be optimally solved using off-the-shelf solvers. For large maps, we develop a scalable suboptimal algorithm based on Lagrangian relaxation and A* search. Specifically, we incorporate BS resource constraints into A* corridor search via Lagrangian relaxation, and then jointly optimize BS coverage and UAV density along the generated corridors under the original rate constraints. Numerical results demonstrate the benefits of the proposed joint design in supporting high-density UAV operations and show that the proposed algorithm obtains high-quality solutions with substantially reduced computation time.

0.12

Sensing the Variation of Wireless Propagation Environment Based on Channel Knowledge Map

eess.SP ·2026-11-04 ·Haohan Li, Wence Zhang, Xiaoyan Shao, Xu Bao, Jing Xia +1 more
top venue similarity 0.59
Abstract · Accepted by IEEE Transactions on Wireless Communications

With the evolution of sixth-generation (6G) wireless systems, integrated sensing and communication (ISAC) has raised the demand for high-precision environmental perception. To address the limited capability of existing techniques in sensing environmental variations, this work proposes a novel channel knowledge map (CKM)-based sensing framework that enables structural change sensing in the wireless propagation environment. By leveraging historical CKM data and real?time user channel, a mathematical model is formulated to infer the changing reflectors which represents the environment variations. Specifically, we propose the Information Aggregation Based Robust Two-Stage Reflection Point Refinement (IA-TS-RPR) scheme for reflection point (RP) estimation, which first uses block coordinate descent (BCD) and Riemannian manifold optimization (RMO) for initial estimation, then applies virtual base station (VBS) clustering for information aggregation in the sensitive area (SA) to refine the estimation. Furthermore, we propose an Environment Variation Sensing scheme based on the Hausdorff-Nearest Neighbor Criterion and Time-Window Voting (EVS-HC-TWV). Specifically, the Hausdorff distance is used to match each user to its most relevant CKM grid point (GP), and a time-window-based multi-user voting mechanism is further employed to improve robustness against positional deviations. Simulation results demonstrate that the proposed IA-TS-RPR scheme maintains sub-meter RP position estimation accuracy under user positioning errors, significantly outperforming the scheme based on time of arrival (ToA), linear minimum mean square error (LMMSE) and least squares (LS). The proposed scheme successfully senses and localizes dynamic reflectors, showing strong generalizability and robustness.

0.50

Simultaneous Indoor and Outdoor Coverage with Conformal Intelligent Omni-Surface

eess.SP ·2026-08-24 ·Yiqi Chen, Xiaoming She, Jianchi Zhu, Nanxi Li, Ruizhe Long +1 more
similarity 0.59
Abstract

Seamless indoor--outdoor coverage conventionally relies on coordinated outdoor macro cells and indoor small cells, incurring high deployment and backhaul costs. Intelligent omni-surfaces (IOSs) provide a promising alternative by enabling simultaneous reflection and transmission across building boundaries. Enabled by recent advances in conformal antennas, conformal IOSs (CIOSs) mounted on building facades offer a flexible and deployment-friendly solution for integrated indoor--outdoor coverage. This paper develops a stochastic-geometry framework to evaluate the downlink performance of CIOS-assisted networks serving both indoor and outdoor users. Specifically, a building-dependent spatial model is established where randomly located buildings are modeled via a Boolean scheme with CIOSs mounted on their facades. Unlike planar IOS deployment, conformal integration introduces geometry dependent visibility constraints, which are captured through the effective numbers of participating elements defined by visible arc metrics for reflection and transmission. Incorporating these constraints, coverage probability expressions are derived under three CIOS operating protocols. Numerical results show that, compared with planar IOS, CIOS improves the successful connection probabilities of the reflected and transmitted links by up to 75% and 125%, respectively, while the overall coverage gain remains dependent on blockage conditions because curvature reduces the effective serving aperture.

0.18

Agents in the Scene: An Agentic Framework for Resource-Efficient Site-Specific Base Station Deployment

eess.SY ·2026-09-16 ·Zihao Zhou, Zhaolin Wang, Yuanwei Liu
similarity 0.59
Abstract

An agentic framework is proposed for autonomous site-specific base station (BS) deployment in wireless network planning. In contrast to conventional approaches that rely on manual site surveys or extensive ray-tracing (RT) simulations with significant human intervention, the proposed framework autonomously explores and optimizes BS deployment under a limited RT evaluation budget, enabling resource-efficient network planning. To this end, a continuous, geometry-grounded deployment action space is first constructed from three-dimensional (3D) wireless digital twins. Within this action space, an agent team operates through a stateful perception--reasoning--reflection loop. Specifically, a Placement Agent first generates candidate BS deployments in two complementary modes: an experience-guided mode that refines promising solutions, and an exploration mode that avoids getting stuck in local optima. After the candidate deployments are evaluated through RT, a Reflection Agent interprets the RT results together with the scene geometry, identifies performance-limiting factors such as blockage, overlapping coverage, and uncovered areas, and converts these diagnoses into guidance for subsequent deployment. Through this iterative process, site-specific experience is accumulated and deployment plans are optimized without human intervention. Numerical results in two realistic urban scenarios show that: 1) the proposed approach substantially outperforms heuristic, learning-based, and large language model (LLM)-assisted methods; 2) it achieves highly competitive coverage against the optimal solution while requiring substantially fewer transmitter-level RT evaluations; 3) site-specific reflection effectively turns raw RT feedback into refinement guidance, whereas the dual-mode mechanism preserves diversity and facilitates escape from local optima.

0.26