CS Paper Radar

Improving Radio SLAM via Information Sharing: Collaborative Performance Bounds

Radovan Juran, Ossi Kaltiokallio, Julia Equi, Jukka Talvitie, Elena Simona Lohan, Mikko Valkama

eess.SP ·submitted 2026-11-16 11:36 UTC · v1
published

Abstract

This paper studies the fundamental performance limits of radio-based collaborative simultaneous localization and mapping (C-SLAM) in dense vehicular environments towards the 6G integrated sensing and communications (ISAC) era. We consider a collaborative estimation task consisting of multiple user equipments (UEs) with unknown local state variables together with joint estimation of unknown states of the environment landmarks or targets, using cellular radio measurements. Specifically, a posterior Cramér-Rao bound (PCRB) is derived for such centralized multi-UE cellular radio SLAM with information sharing, capturing the effects of the number of involved UEs, their geometric configuration, and their mutually different abilities to measure or observe different landmarks. The analysis reveals how information sharing scales with UE density, identifies regimes of diminishing returns, and provides estimator-independent limits for collaborative radio-based environment mapping and localization. The provided numerical results validate the proposed framework in a vehicular system context, while also demonstrating substantial gains against more ordinary single-UE radio SLAM approach.

Comment
7 pages. Accepted for presentation at IEEE VTC2026-Spring

Closest papers

Nearest neighbours by meaning across the whole index.

Radio-to-Pose Information for Gauge-Drift Correction in Cooperative Localization

cs.RO cs.MA ·2026-11-05 ·Aditya Iyer, Andy Ye, Akshay Narayan, Nora Ayanian
similarity 0.62
Abstract

Cooperative localization uses odometry and inter-robot measurements to estimate the motion of a robot team. These measurements describe only relative geometry, but the team's estimated position and orientation can drift together over time, i.e., gauge drift. In this work, we study correction of this gauge drift using a radio attenuation map registered in the same world coordinate frame used for robot poses. Specifically, we propose Radio-to-Pose Information (RPI), an interface that converts power residuals and their pose derivatives into a Gaussian information matrix and vector pair. RPI builds on the insight that received power is sensitive to shared displacement in the world map. The pose estimator uses the interface together with odometry and inter-robot measurements to update poses and minimize uncertainty. We characterize the shared motions detectable from the map and observed links. For an uncertain shared map, RPI keeps correlations across robots and time and reproduces joint Gaussian pose estimates and covariances. Across $1000$ simulated Gaussian trials, RPI matches the results of joint estimation. Across 32 paired trials with a registered map, RPI reduces common-position RMSE from $0.542$m to $0.140$m in a $50\times50$m arena compared with a baseline that uses radio only to weight relative measurements.

0.17

Distributed Relative Localization for Homogeneous Multi-Robot Systems through UWB Ranging and Limited Communications

cs.RO ·2026-10-08 ·Zhiqiang Cao, Ran Liu, Billy Pik Lik Lau, Chau Yuen, U-Xuan Tan
top venue similarity 0.59
Abstract · This paper has been published in IEEE/ASME Transactions on Mechatronics

Accurate and reliable relative localization is crucial for multi-robot applications like exploration, search, and rescue missions. LiDAR-based solutions offer high accuracy in localizing surrounding objects; however, distinguishing homogeneous robots with similar appearances remains challenging due to the lack of distinctive identification features. In this paper, we propose a fully distributed relative pose estimation approach by integrating LiDAR, UWB, and odometry measurements, allowing each robot to accurately and continuously localize its teammates without external infrastructure. Specifically, potential anonymous teammate robot clusters from LiDAR scans are tracked by a dynamic tracker. We then identify teammate robots from these tracked anonymous clusters using a joint matching strategy, ensuring reliable data association between robots and clusters. Finally, by combining the corresponding LiDAR observations, UWB ranging, and odometry measurements, each robot precisely localizes others while minimizing data exchange. The system requires only odometry data exchange through onboard UWB, eliminating the need for additional communication infrastructure like WiFi routers or mesh networks. Extensive simulation and real-world experiments demonstrate the effectiveness and reliability of the proposed relative localization approach.

0.38

Embodied AI for Radio Mapping: From Solo to Swarm

eess.SP ·2026-10-31 ·Shangjie Zhuang, Wenlihan Lu, Zhentian Zhang, Ziwei Huang, Zaichen Zhang +2 more
similarity 0.59
Abstract

Radio maps provide spatial knowledge of wireless environments to assess coverage, manage spectrum use, and support connectivity-aware mobility. Recent advances in embodied intelligence (EI) offer a promising approach to radio map reconstruction by enabling agents to perceive the environment and autonomously adjust their survey paths toward safe, reachable locations. However, a single agent remains constrained by limited endurance and onboard computing capacity, limiting measurement collection and reconstruction performance. Swarm cooperation can support more efficient radio mapping over larger areas by sharing observations and coordinating members' sampling. This article first explores the capabilities and applications of cooperative embodied agents. A cooperative radio map reconstruction framework is then presented, together with its key enabling techniques. Case study results illustrate how scene perception supports access to informative sampling locations and how air--ground cooperation improves reconstruction through complementary measurements and mobile support. The article concludes with open challenges and future research directions for reliable and efficient embodied cooperative radio mapping in complex environments.

0.30

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

eess.SP cs.NI ·2026-09-10 ·Koki Kanzaki, Katsuya Suto, Koya Sato
similarity 0.59
Abstract · 16 pages, 11 figures. This work has been submitted to the IEEE for possible publication

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

0.38

Moment-Matching Probabilistic Data Association for Optimization-Based SLAM

cs.RO stat.AP ·2026-09-05 ·Khoa Nguyen, Mitchell Turton, Florian Meyer
published similarity 0.58
Abstract · 7 pages, 3 figures, ISIF FUSION 2026 Conference

Optimization-based simultaneous localization and mapping (SLAM) makes it possible to reduce accumulated navigation errors of sensing platforms by returning to known areas (loop closure). In this paper, we present an approach to combine probabilistic data association (PDA) with optimization-based SLAM. Instead of associating a single measurement with each landmark, we follow the PDA paradigm from the multiobject tracking community. In particular, in a processing stage performed in addition to the nonlinear least-squares solver of optimization-based SLAM, our method (i) assigns multiple measurements to landmarks probabilistically, (ii) computes the mean and covariance of landmark distributions via moment matching by taking multiple measurement-to-landmark associations into account, and (iii) establishes a virtual landmark measurement and a corresponding linear-Gaussian measurement model that leads to the mean and covariance matrix as moment-matching PDA in (ii). By converting the PDA update step into an equivalent linear-Gaussian measurement update step, PDA can be performed effectively within any optimization-based SLAM method. Our preliminary numerical evaluation in a scenario with false negatives and false positives indicates that incremental smoothing and mapping 2 (iSAM2), combined with the proposed PDA approach, can improve agent localization performance compared to conventional iSAM2.

0.33

Spectral-Convolutional Factorized Transformer for Joint Multipath Parameter Estimation: Applications to mmWave Positioning and Radio SLAM

eess.SP cs.AI ·2026-11-01 ·Yaya Etiabi, Wessam Ajib, Halima Elbiaze
similarity 0.56
Abstract

Future 6G wireless networks are expected to evolve toward AI-native systems that support intelligent, environment-aware services, including positioning and mapping. Current research has already integrated AI into several aspects of communication, particularly wireless channel estimation. However, most learning-based channel estimators focus on communication-oriented objectives rather than explicitly estimating multipath parameters such as delay, angle of arrival (AoA), and angle of departure (AoD). These parameters provide essential geometric information for downstream tasks including positioning and radio simultaneous localization and mapping (SLAM). In this work, we propose a Spectral-Convolutional Factorized Transformer (SCFT) for joint multipath component (MPC) estimation from noisy complex channel estimates and physical beam-pair descriptors. SCFT combines local spectral convolution, permutation-equivariant beam-set attention, and a query-based Transformer decoder to detect and classify line-of-sight and non-line-of-sight paths and estimate their observed delays, AoAs, and AoDs. Experiments on realistic ray-tracing data show that SCFT reduces the generalized optimal sub-pattern assignment error by 13.1% compared with ResNet, the strongest competing baseline. We further demonstrate this advantage in independent snapshot positioning and radio SLAM, where SCFT reduces position RMSE by 18.5% and 65.0%, respectively, relative to ResNet. These findings highlight the importance of explicitly recovering multipath geometry, as improvements in MPC estimation can translate into substantial gains in downstream tasks.

0.22

Consistent Distributed Invariant EKF SLAM with Point and Object Features

cs.RO ·2026-10-22 ·Mengya Xu, Xianjia Yu, Ha Sier, Shoudong Huang, Tomi Westerlund
similarity 0.56
Abstract · Submitted to IEEE Robotics and Automation Letters (RA-L)

Multi-robot SLAM allows robots to improve their estimates by exchanging map information, but repeated exchanges create unknown correlations between local estimators. Covariance intersection (CI) can fuse estimates without tracking these correlations. In right-invariant extended Kalman filter (RI-EKF) SLAM, however, point features obtain their invariant errors through the robot rotation, so a neighbor's map estimate is expressed in its own error coordinates and is correlated with its pose, and cannot be fused by CI directly. This paper presents Joint-CI, a unified fusion method for distributed RI-EKF SLAM with point, object, and mixed point--object maps. Using a neighboring robot's local posterior and an inter-robot observation, a joint estimate of the receiving robot's pose and the common features is constructed in the receiving robot's error coordinates, retaining the robot--feature and feature--feature correlations. Partial-state CI then fuses this estimate with the receiving robot's local posterior. We show that the unified formulation and the fusion preserve the six unobservable directions associated with global rotation and translation, and that communication and fusion preserve first-order covariance consistency given consistent local posteriors. Monte Carlo simulations and a real-world dataset-derived experiment show that Joint-CI improves estimation accuracy while maintaining consistent, mildly conservative uncertainty.

0.23

A Tutorial on Infrastructure Self-Calibration for Radio-Based Indoor Positioning

eess.SP ·2026-11-11 ·Paul Schwarzbach
code/data similarity 0.56
Abstract

Radio positioning needs the positions of its anchors, access points, base stations, or reconfigurable intelligent surfaces, and manual surveying is costly and error-prone. Calibrating this infrastructure from its own measurements is one estimation problem, studied in at least four communities as self-calibration, auto-positioning, anchor self-localization, network localization, or radio simultaneous localization and mapping. This tutorial teaches the problem through one factor graph. The measurement topology sets its factors, the reference information enters as priors, and other measurement models add nuisance states. The tutorial shows what ranges can identify, from rigidity to the motion a mobile device must contribute, and presents multidimensional scaling, nonlinear least squares, recursive filters, and convex relaxations as inference engines over this graph. One session of a ten-anchor ultra-wideband deployment is carried through every step, and recordings from a second, harsher deployment and a public partial mesh serve as contrasts. The examples illustrate three lessons. On a full mesh, choose a robust loss and set its scale first, and calibrate with the engine of the positioning system, since the engines then reach similar errors. On thinned or partial meshes, test the result at surveyed check points, because the start decides which minimum a solver reaches. On a line-of-sight deployment, estimate range offsets, which lower the error floor that a systematic ranging bias sets and a robust loss cannot remove. A decision tree and a table of their effects turn them into deployment guidance. Code and result tables are openly released, and the data are published separately.

0.32