CS Paper Radar

Spectral-Convolutional Factorized Transformer for Joint Multipath Parameter Estimation: Applications to mmWave Positioning and Radio SLAM

Yaya Etiabi, Wessam Ajib, Halima Elbiaze

eess.SP cs.AI ·submitted 2026-11-01 03:23 UTC · v2

Abstract

Future 6G wireless networks are expected to evolve toward AI-native systems that support intelligent, environment-aware services, including positioning and mapping. Current research has already integrated AI into several aspects of communication, particularly wireless channel estimation. However, most learning-based channel estimators focus on communication-oriented objectives rather than explicitly estimating multipath parameters such as delay, angle of arrival (AoA), and angle of departure (AoD). These parameters provide essential geometric information for downstream tasks including positioning and radio simultaneous localization and mapping (SLAM). In this work, we propose a Spectral-Convolutional Factorized Transformer (SCFT) for joint multipath component (MPC) estimation from noisy complex channel estimates and physical beam-pair descriptors. SCFT combines local spectral convolution, permutation-equivariant beam-set attention, and a query-based Transformer decoder to detect and classify line-of-sight and non-line-of-sight paths and estimate their observed delays, AoAs, and AoDs. Experiments on realistic ray-tracing data show that SCFT reduces the generalized optimal sub-pattern assignment error by 13.1% compared with ResNet, the strongest competing baseline. We further demonstrate this advantage in independent snapshot positioning and radio SLAM, where SCFT reduces position RMSE by 18.5% and 65.0%, respectively, relative to ResNet. These findings highlight the importance of explicitly recovering multipath geometry, as improvements in MPC estimation can translate into substantial gains in downstream tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

LocAttMamba: A Low-Complexity Mamba Framework with Attention-Based Multi-AP Fusion for Indoor Localization

cs.NI ·2026-10-05 ·MohammadMahdi Ghadaksaz, Mohammad Farzanullah, Melike Erol-Kantarci
benchmark similarity 0.68
Abstract

Accurate and low-complexity indoor localization is important for location-based services in fifth generation (5G) and sixth generation (6G) networks, where positioning devices operate under limited computational budgets and non conditions. Indoor localization has been studied widely using traditional signal-level localization approaches. However, these techniques often show degraded performance in on-line-of-sight (NLoS) scenarios. Recently, artificial intelligence (AI)-based techniques, including transformers, have been applied to address these challenges. While transformer-based architectures can capture the dependencies within the measurements collected from distributed access points (APs), their high computational complexity results in a large number of multiply-accumulate operations and long inference time. In contrast, lightweight recurrent and convolutional models trade this cost for degraded accuracy. In this paper, we propose LocAttMamba, a low-complexity localization framework in which the channel impulse response (CIR) and time-based features of each AP are processed by a separate Mamba encoder with near-linear complexity, and the resulting per-AP embeddings are fused through a multi-head attention layer that weights each AP according to its importance at every time step. The framework jointly predicts the user location and its per-axis uncertainty, which is refined through a post-hoc calibration step. We evaluate the proposed framework using two real-world 5G and ultra-wideband (UWB) measurement datasets. Our numerical results reveal that LocAttMamba obtains a mean two-dimensional (2-D) positioning error of 1.004 m and 0.599 m, respectively, on 5G and UWB datasets, outperforming the second-best benchmark by 9.79% and 5.82%, while requiring the fewest multiply-accumulate operations among all evaluated models and being 4.4-16 times faster than the transformer-based benchmarks.

0.19

Foundation Models for Wireless Localization: Pretraining, Adaptation, and Utilization

eess.SP ·2026-08-31 ·Guangjin Pan, Jiajia Guo, Zheng Xing, Hui Chen, Chao-Kai Wen +2 more
similarity 0.62
Abstract · 4 pages, 1 table. This work has been submitted to the IEEE for possible publication

Accurate wireless localization is a key enabler for 6G networks, yet remains challenging under diverse and rapidly changing propagation conditions. Model-based methods degrade when multipath channels are non-resolvable and model mismatches occur, while supervised deep learning demands large labeled datasets and generalizes poorly to new deployments. Inspired by foundation models (FMs) in language and vision, this article presents a unified framework for FM-based wireless localization that learns transferable channel representations from large-scale unlabeled channel state information and adapts to new environments with minimal or even no supervision. We review the fundamentals of FMs, compare the FM paradigm with existing localization approaches, and introduce a three-stage framework spanning large-scale pretraining, localization-oriented fine-tuning, and context-augmented inference, together with the location-aware applications it enables. Ray-tracing-based case studies show improved positioning accuracy and cross-environment generalization. Finally, we present an outlook on key research directions toward AI-native networks for wireless localization.

0.21

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.61
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.61
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39

RAIL-5G: A Challenging Real-World Dataset and Benchmark for AI-Based 5G Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Jonas Pirkl, Andreas Eidloth, Maximilian Kasparek, Tobias Feigl, Christopher Mutschler
publishedbenchmarkcode/data similarity 0.57
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Reliable radio-based indoor localization is essential for industrial automation, yet existing methods are often evaluated in environments that do not fully reflect the severe multipath and non-line-of-sight (NLOS) conditions encountered in real deployments. This limits our understanding of how AI, i.e., modern geometric, unsupervised, and semi-supervised localization methods generalize to industrial 5G settings. We present RAIL-5G, a public real-world 5G NR channel impulse response (CIR) benchmark recorded in an operational railway maintenance facility. RAIL-5G covers an 811m$^2$ indoor area with eight distributed radio units, robot-mounted user equipment (UE) trajectories, high-accuracy iGPS reference positions, and severe metal-induced multipath caused by train compartments and maintenance infrastructure. We benchmark geometric time-difference of arrival (TDoA), supervised fingerprinting, unsupervised channel charting, and self-supervised wireless pretraining methods. Our results highlight the difficulty of RAIL-5G: on the full dataset, TDoA reaches 7.02m mean average error (MAE), the best unsupervised method reaches 2.46m, and supervised fingerprinting achieves 0.52m. Self-supervised pretraining reduces the labeling effort by up to one order of magnitude, but the remaining gap to supervised learning shows that robust AI-based localization under severe multipath remains an open challenge. The dataset and code are available at https://iis.fraunhofer.de/rail-5g.

0.39

CFAR Detection on Non-Coherently Integrated Angular Maps for mmWave Radio SLAM

eess.SP ·2026-11-10 ·Paolo Tosi, Ossi Kaltiokallio, Marcus Henninger, Silvio Mandelli, Mikko Valkama
similarity 0.57
Abstract · 6 pages, 4 figures, 1 table. This work has been submitted to the IEEE for possible publication

Reliable multipath detection is essential for millimeter-wave simultaneous localization and mapping (SLAM), where propagation paths reflecting off the environment provide geometric constraints beyond the dominant line-of-sight component. This paper develops constant false alarm rate (CFAR)-based detectors for beam-swept bistatic integrated sensing and communications (ISAC). Starting from conventional CFAR on the I/Q datacube, we derive a modified detector for non-coherently integrated angular power maps, where the post-integration noise statistics differ from those assumed by standard cell-averaging CFAR. To improve practicality, we introduce a multi-cell cell-under-test formulation and a plus-shaped training window that reduces computational cost while accounting for sidelobe structure. The proposed methods are evaluated on experimental 60 GHz indoor measurements using a snapshot-SLAM estimator. Compared with a singular value decomposition (SVD)-based detector, the proposed CFAR approaches reduce the overall positioning RMSE from 0.30 m to 0.24-0.26 m, with the largest improvement in non-line-of-sight snapshots. The multi-cell non-coherent detector further lowers the computational complexity without degrading positioning accuracy, demonstrating its suitability for practical multipath radio-SLAM.

0.33

Training-Efficient Channel Estimation for the Multiuser Uplink Relying on Generalized Flexible Intelligent Metasurfaces

eess.SP ·2026-10-21 ·Daniel C. Araújo, André L. F. de Almeida, Lajos Hanzo
similarity 0.57
Abstract

We consider uplink multiuser channel estimation for a generalized flexible intelligent metasurface at the base station, under narrowband far-field propagation and a twin-time-scale mechanical protocol: on the slow time-scale the panel translates rigidly over a planar grid, while on the fast time-scale the surface morphs along its normal direction. From orthogonal multiuser pilots, we show that each user's channel admits a fourth-order canonical polyadic tensor structure. We develop two complementary estimators: alternating least squares factorization followed by paired rotational-invariance wavevector extraction, and a tensor spatial-smoothing multiple signal classification estimator that preserves the multilinear array manifold. Both share a minimum description length front-end for automatic tensor-rank detection. We derive Kruskal identifiability conditions that relate the numbers of elements, morphing states and grid positions to the maximum number of recoverable multipath components, and show that the tensor model reconstructs the channel at panel configurations beyond the training grid. This prediction capability drives a configuration-selective multiuser transmit precoder that searches the entire motion grid without additional pilot overhead. Numerical results confirm the identifiability limits and show that, once the model order is resolved, the configuration search makes the same choice from estimated as from perfect channel state information. The reconfiguration gain over a fixed panel of identical aperture and training budget grows with the user load, and fast morphing proves valuable for conditioning the tensor factorization rather than as a source of beamforming gain.

0.27

Wave-Robust Passive AUV Localization Using FP-MUSIC

cs.RO ·2026-09-23 ·Usama Saqib, Ola Rønning, Andrzej Wąsowski
similarity 0.56
Abstract

Localizing an autonomous underwater vehicle without pre-deployed seabed transponders, or direct access to onboard vehicle sensors remains a core challenge. We present a receiver-passive 3-D localization and spatial mapping system utilizing a single floating surface buoy equipped with a hydrophone array and an inertial measurement unit (IMU). The central difficulty is that surface wave motion induces six-degree-of-freedom (6-DOF) perturbations that rotate the array between snapshots, degrading conventional subspace processing. We resolve this by introducing a fixed-point iterative MUltiple SIgnal Classification algorithm (FP-MUSIC) that uses IMU measurements to de-warp snapshot covariances prior to direction-of-arrival estimation. Furthermore, we employ a subspace-projected wideband matched filter to resolve beacon ranges and use power asymmetry for independent front-back identification. Evaluations across simulated sea states demonstrate that FP-MUSIC substantially reduces localization error relative to uncompensated methods and sustains robust 3-D tracking and vehicle orientation estimation under wave-induced motion. At moderate sea state, FP-MUSIC increases the 2-m beacon-separation accuracy from approximately 45% to 75%.

0.19