CS Paper Radar

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht, Daniel Abraham, Theodore S. Rappaport

eess.SP ·submitted 2026-09-08 07:36 UTC · v2
published

Abstract

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

Comment
6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Closest papers

Nearest neighbours by meaning across the whole index.

CFAR Detection on Non-Coherently Integrated Angular Maps for mmWave Radio SLAM

eess.SP ·2026-11-10 ·Paolo Tosi, Ossi Kaltiokallio, Marcus Henninger, Silvio Mandelli, Mikko Valkama
similarity 0.64
Abstract · 6 pages, 4 figures, 1 table. This work has been submitted to the IEEE for possible publication

Reliable multipath detection is essential for millimeter-wave simultaneous localization and mapping (SLAM), where propagation paths reflecting off the environment provide geometric constraints beyond the dominant line-of-sight component. This paper develops constant false alarm rate (CFAR)-based detectors for beam-swept bistatic integrated sensing and communications (ISAC). Starting from conventional CFAR on the I/Q datacube, we derive a modified detector for non-coherently integrated angular power maps, where the post-integration noise statistics differ from those assumed by standard cell-averaging CFAR. To improve practicality, we introduce a multi-cell cell-under-test formulation and a plus-shaped training window that reduces computational cost while accounting for sidelobe structure. The proposed methods are evaluated on experimental 60 GHz indoor measurements using a snapshot-SLAM estimator. Compared with a singular value decomposition (SVD)-based detector, the proposed CFAR approaches reduce the overall positioning RMSE from 0.30 m to 0.24-0.26 m, with the largest improvement in non-line-of-sight snapshots. The multi-cell non-coherent detector further lowers the computational complexity without degrading positioning accuracy, demonstrating its suitability for practical multipath radio-SLAM.

0.26

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.64
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23

RAIL-5G: A Challenging Real-World Dataset and Benchmark for AI-Based 5G Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Jonas Pirkl, Andreas Eidloth, Maximilian Kasparek, Tobias Feigl, Christopher Mutschler
publishedbenchmarkcode/data similarity 0.63
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Reliable radio-based indoor localization is essential for industrial automation, yet existing methods are often evaluated in environments that do not fully reflect the severe multipath and non-line-of-sight (NLOS) conditions encountered in real deployments. This limits our understanding of how AI, i.e., modern geometric, unsupervised, and semi-supervised localization methods generalize to industrial 5G settings. We present RAIL-5G, a public real-world 5G NR channel impulse response (CIR) benchmark recorded in an operational railway maintenance facility. RAIL-5G covers an 811m$^2$ indoor area with eight distributed radio units, robot-mounted user equipment (UE) trajectories, high-accuracy iGPS reference positions, and severe metal-induced multipath caused by train compartments and maintenance infrastructure. We benchmark geometric time-difference of arrival (TDoA), supervised fingerprinting, unsupervised channel charting, and self-supervised wireless pretraining methods. Our results highlight the difficulty of RAIL-5G: on the full dataset, TDoA reaches 7.02m mean average error (MAE), the best unsupervised method reaches 2.46m, and supervised fingerprinting achieves 0.52m. Self-supervised pretraining reduces the labeling effort by up to one order of magnitude, but the remaining gap to supervised learning shows that robust AI-based localization under severe multipath remains an open challenge. The dataset and code are available at https://iis.fraunhofer.de/rail-5g.

0.39

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.62
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

Integrated Sensing and Communication via Channel Knowledge Maps Built from Beam Feedback Coefficients

eess.SP ·2026-10-29 ·Chongda Huang, Yue Xiao, Gang Wu, Vladimir Poulkov, Xianfu Lei +1 more
similarity 0.62
Abstract

Channel knowledge maps (CKMs) support wireless localization by linking channel features to user locations. Detailed channel fingerprints, however, can require substantial storage. This paper proposes a CKM-based localization framework that uses beam feedback coefficients collected during communication. These coefficients serve as compact location fingerprints within the beam management process, without requiring full channel feedback or additional sensing measurements. Using a coarse position prior, the base station searches nearby CKM entries and refines the location estimate through local interpolation. We analyze the relationship between spatial fingerprint variation and localization accuracy, and evaluate the effect of feedback quantization. Simulations show favorable storage--accuracy trade-offs relative to dense and sparsified spectral fingerprinting in the tested multipath environments.

0.33

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

eess.SP cs.NI ·2026-09-10 ·Koki Kanzaki, Katsuya Suto, Koya Sato
similarity 0.61
Abstract · 16 pages, 11 figures. This work has been submitted to the IEEE for possible publication

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

0.38

Spectral-Convolutional Factorized Transformer for Joint Multipath Parameter Estimation: Applications to mmWave Positioning and Radio SLAM

eess.SP cs.AI ·2026-11-01 ·Yaya Etiabi, Wessam Ajib, Halima Elbiaze
similarity 0.61
Abstract

Future 6G wireless networks are expected to evolve toward AI-native systems that support intelligent, environment-aware services, including positioning and mapping. Current research has already integrated AI into several aspects of communication, particularly wireless channel estimation. However, most learning-based channel estimators focus on communication-oriented objectives rather than explicitly estimating multipath parameters such as delay, angle of arrival (AoA), and angle of departure (AoD). These parameters provide essential geometric information for downstream tasks including positioning and radio simultaneous localization and mapping (SLAM). In this work, we propose a Spectral-Convolutional Factorized Transformer (SCFT) for joint multipath component (MPC) estimation from noisy complex channel estimates and physical beam-pair descriptors. SCFT combines local spectral convolution, permutation-equivariant beam-set attention, and a query-based Transformer decoder to detect and classify line-of-sight and non-line-of-sight paths and estimate their observed delays, AoAs, and AoDs. Experiments on realistic ray-tracing data show that SCFT reduces the generalized optimal sub-pattern assignment error by 13.1% compared with ResNet, the strongest competing baseline. We further demonstrate this advantage in independent snapshot positioning and radio SLAM, where SCFT reduces position RMSE by 18.5% and 65.0%, respectively, relative to ResNet. These findings highlight the importance of explicitly recovering multipath geometry, as improvements in MPC estimation can translate into substantial gains in downstream tasks.

0.22

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.61
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39