CS Paper Radar

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

Seyed Bagher Hashemi Natanzi, Bo Tang

cs.NI eess.SP ·submitted 2026-10-30 23:12 UTC · v1

Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

Closest papers

Nearest neighbours by meaning across the whole index.

ISAC-Assisted Proactive Handover in mmWave Networks: Value of Foresight and Localization Requirements

eess.SY cs.NIeess.SP ·2026-11-02 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.71
Abstract

Millimeter-wave (mmWave) links can lose tens of decibels within milliseconds when a person or vehicle crosses the line of sight, and reactive handover recovers only after the outage has begun. Integrated sensing and communication (ISAC) promises to let the network see blockers coming and move users to another cell in advance. This paper asks how much such foresight is worth relative to the best reactive handover, and what sensing accuracy is needed to harvest it. We formulate cost-aware cell selection with knowledge of the future signal-to- noise ratio as a sequential decision problem, define the value of foresight through a policy-independent bound, and develop an ISAC-assisted handover framework in which a radio unit senses blockers with its own communication waveform and a simulated Open RAN xApp plans handovers. Ray-traced experiments in a 28 GHz street canyon, reported on held-out scenarios, show that, with a short look-ahead, perfect foresight closes most of the gap between service-aware (Layer-3) reactive handover and an instantaneous oracle. Harvesting this value, however, requires the user and nearby blockers to be localized to about a decimeter, well beyond what our radar tracker and meter- level user positioning provide; with realistic errors, even an uncertainty-aware planner largely defers to reactive handover.

0.43

Vehicle and UAV Detection and Tracking with LTE Downlink Reference Signals: A Ray-Traced Evaluation on a Mapped Suburban Site with Licensed Base-Station Records

cs.NI ·2026-11-01 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.67
Abstract · 18 pages, 7 figures, 14 tables. Revised version

Passive sensing on the cellular downlink places the receiver at the user equipment and changes nothing in the network. We report simulation results for an LTE band-3 cell-specific reference signal arm on a ray-traced channel. On a synthetic street canyon the arm is compared with an uplink sounding reference signal arm on the same band, target and scorer: missed-detection probabilities of 0.667 and 0.772. On a surveyed site built from OpenStreetMap footprints and the licensed site record, nine receiver positions along the street track the vehicle at coverage between 29.9 % and 61.7 %; a 283 m lap separates target height from trajectory at 1.6 to 30 m; a 137 m lap on the built-up street tracks a vehicle and a 15 m airborne target on every cell, and 8 receivers at 135 m spacing carry one illuminator's coverage over 1140 m of the street. Potential future work includes extending the analysis to multiple illuminators and varying receiver configurations, and confirmation through over-the-air measurements.

0.34

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.63
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.62
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

RayAR: Autoregressive Dominant Path Generation for Low-Overhead MIMO Beam Alignment

eess.SP ·2026-10-31 ·Junxi Huang, Xiucheng Wang, Nan Cheng, Kailong Wang, Jiang Guo +1 more
similarity 0.61
Abstract

Beam alignment in multiple-input multiple-output (MIMO) systems requires selecting suitable transmit and receive beam pairs with limited measurement overhead. Although 3GPP Release 18 investigates beam prediction from partial measurements, collecting these measurements still incurs probing overhead. Geometry can focus this probing through the departure and arrival directions of dominant paths, whose identification requires accounting for coupled diffraction interactions. To address this challenge, we propose RayAR, an autoregressive method that generates dominant propagation paths from urban geometry. RayAR conditions candidate ranking on the path prefix, local diffraction geometry, and receiver reachability, updating this context after each selection until the receiver becomes visible. The completed path's departure and arrival directions rank beam pairs for probing, allowing the pair with the highest received power to be selected from a small candidate set. Under 3GPP Release 18 beam-management metrics, RayAR reduces probing by 96.88\% relative to exhaustive sweeping and achieves the highest optimal-pair hit rate among compared methods at the same budget. Real-world measurements further demonstrate the accuracy of this geometric guidance, with simulation-trained RayAR achieving the lowest departure and arrival angular errors among compared methods without fine-tuning and a mean arrival-direction error of 9.07$^\circ$.

0.36

Digital Twin-Conditioned RSS-Fingerprint Localization in Cell-Free Millimeter-Wave Networks

cs.NI eess.SP ·2026-10-14 ·Varun S. Advani, Khalid Kanaan, Ahmed Nasser, Mohamed Y. Selim, Ahmed M. Eltawil
similarity 0.60
Abstract · 16 pages, 14 figures, 7 tables. Under review at IEEE Journal on Selected Areas in Communications

Digital twins (DTs) can generate dense synthetic fingerprints for localization via ray tracing, yet the sim-to-real domain gap limits their direct use, particularly in cell-free millimeter-wave (mmWave) deployments where distributed geometries and blockage-induced sparsity widen the mismatch. We propose DT-conditioned (DTCond), a framework that fuses real and DT beam-domain fingerprints as complementary inputs through per-domain encoders, learnable per-access point (AP) attention, and calibrated uncertainty. We derive oracle and pipeline Cramér-Rao bounds (CRBs) for DT-aided fingerprint localization, proving that DT information strictly tightens the positioning bound whenever spatial structure is preserved, with a heteroscedastic refinement that tightens the bound by a further 9.1%. On a real 28 GHz cell-free testbed, the deployable two-stage pipeline, which reads the DT fingerprint at a coarse k-nearest neighbor (k-NN) estimate, achieves 0.284 m mean error against 0.313 m for real-only k-NN. With the DT fingerprint read at the true position (oracle input), DT conditioning achieves 0.186 m mean error, validated through a ten-method ablation against domain-adaptation (DA) and transfer-learning baselines, and a 48% improvement on unseen regions. Multi-user self-attention provides 31-41% per-user gain for emulated simultaneous users, and progressive calibration reduces the measurement budget by 50%. As a use case, localization drives network configuration in closed loop. Between beam sweeps, a DT updated from measured RSS and read at the tracked position estimate selects the 3 of 81 beam pairs that each AP trains. With 49 calibration anchors in the update, the mean beam-selection loss stays below 1 dB over 2 m of motion, whereas reusing the last sweep loses 2.7 dB after 1 m.

0.29

A Ray-Traced Digital Twin for 5G NR Positioning with OpenAirInterface

cs.IT ·2026-10-09 ·Nima Chaharbaghi, Florian Kaltenberger, Bartosz Podrygajlo, Rakesh Mundlamuri, Roberto Verdone
similarity 0.60
Abstract · submitted at 22nd Wireless On-demand Network systems and Services Conference

Evaluating 5G positioning on a physical testbed ties every measurement to one propagation environment and one antenna layout, so any question about an alternative deployment requires a new field campaign. We present a ray-traced digital twin of the GEO-5G testbed at EURECOM that drives an unmodified OpenAirInterface (OAI) 5G stack with per-antenna channels computed by Sionna-RT over a 3D model of the site. The distributed gNB antennas are modelled as independent radio devices rather than as elements of a compact array, which preserves the per-antenna absolute delays on which time-difference-of-arrival (TDoA) positioning depends. With them preserved, the twin drives OAI's SRS-based UL-TDoA pipeline to metre-level accuracy consistent with that reported for the physical deployment. We then use the twin to answer a question the physical testbed cannot. Widening the carrier truncates the tail of the horizontal error distribution without improving a typical position, and leaves the vertical error untouched, because the latter is limited by the array geometry rather than by the measurement. That limit is predictable from the antenna coordinates alone, and a height-diverse layout reduces the RMS height error by a factor of four.

0.20

Positioning with Flexible Reflectors: Solution and Performance Analysis

cs.IT ·2026-08-14 ·Jiajun He, Han Yu, Danyan Lin, Gaofeng Pan, Hing Cheung So +2 more
publishedtheory similarity 0.59
Abstract

Flexible reflectors (FRs) have emerged as a low-cost and energy-efficient solution for reshaping electromagnetic propagation environments across a wide range of applications. This paper investigates FR-swarm-assisted target localization in scenarios where line-of-sight (LoS) paths are unavailable. By leveraging the virtual LoS paths created by the FRs, a simple yet accurate estimator is proposed for localization under severe blockage conditions. To characterize the performance limits of the proposed scheme, we derive the Cramer-Rao lower bound (CRLB) and use it to optimize the positions and orientations of the FRs. Furthermore, by accounting for random FR deployment, we characterize the CRLB distribution and reveal how different network configurations affect localization accuracy. Simulation results demonstrate that the developed scheme closely approaches the CRLB performance, while the derived analytical results provide useful guidelines for FR deployment and network design.

0.17