CS Paper Radar

ISAC-Assisted Proactive Handover in mmWave Networks: Value of Foresight and Localization Requirements

Seyed Bagher Hashemi Natanzi, Bo Tang

eess.SY cs.NIeess.SP ·submitted 2026-11-02 17:24 UTC · v2

Abstract

Millimeter-wave (mmWave) links can lose tens of decibels within milliseconds when a person or vehicle crosses the line of sight, and reactive handover recovers only after the outage has begun. Integrated sensing and communication (ISAC) promises to let the network see blockers coming and move users to another cell in advance. This paper asks how much such foresight is worth relative to the best reactive handover, and what sensing accuracy is needed to harvest it. We formulate cost-aware cell selection with knowledge of the future signal-to- noise ratio as a sequential decision problem, define the value of foresight through a policy-independent bound, and develop an ISAC-assisted handover framework in which a radio unit senses blockers with its own communication waveform and a simulated Open RAN xApp plans handovers. Ray-traced experiments in a 28 GHz street canyon, reported on held-out scenarios, show that, with a short look-ahead, perfect foresight closes most of the gap between service-aware (Layer-3) reactive handover and an instantaneous oracle. Harvesting this value, however, requires the user and nearby blockers to be localized to about a decimeter, well beyond what our radar tracker and meter- level user positioning provide; with realistic errors, even an uncertainty-aware planner largely defers to reactive handover.

Closest papers

Nearest neighbours by meaning across the whole index.

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.71
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

Agentic Digital Twin-Assisted Multimodal Predictive Handover

eess.SP ·2026-10-24 ·Afan Ali, Ali Arshad Nasir, Naveed Iqbal, Daniel Benevides da Costa
similarity 0.65
Abstract · 6 pages, 6 figures, conference

Rapid mobility, blockage, and propagation changes can invalidate instantaneous handover decisions in dense mid-band and millimeter-wave (mmWave) networks. We therefore propose a flexible, model-agnostic \emph{Agentic Digital Twin (DT)} framework for predictive cell handover. The DT generates synchronized multimodal states, while three agents autonomously select forecasts, plan handover actions, and adapt decisions using execution feedback. The proposed Agentic DT provided the best collective balance among handover activity, the reliability of the selected links, and the accuracy of target next-generation Node B (gNB) selection relative to the best available future link. It reduced average handovers from $11.0$ for Event~A3 to $8.0$ per trajectory while maintaining $98.2\%$ ray-path availability.

0.25

Scalable Extended-Target Handover in Distributed Integrated Sensing and Communication

eess.SP ·2026-09-22 ·Liping Bai, Yu Ge, Ali Al Khansa, Hyowon Kim, Erik Leitinger +1 more
similarity 0.64
Abstract · 15 pages and 9 figures in total; includes 2 pages of supplementary material

Distributed integrated sensing and communication (DISAC) networks require multi-target tracking methods whose per-node computation and inter-base-station communication remain bounded as both the network and target populations grow. Existing multisensor fusion methods provide a strong theoretical foundation, but scalability is seldom treated as the primary design objective. We develop a grouped-measurement belief-propagation multi-target tracking (MTT) method and combine it with a proposed event-triggered target-handover protocol. When a tracked target is predicted to become observable at another base station, the owner transfers a predicted track message while retaining its local copy. Under bounded local workload and neighbor degree, we show that all variants of the proposed handover methods have network-size-independent per-node loads. Simulations demonstrate that handover reduces boundary track loss relative to uncoordinated processing and approaches coordinated-processing accuracy with lower communication overhead.

0.27

Integrated Sensing and Communication in 3GPP: Standardization, Performance Evaluation, and Experimental Validation Toward 6G

eess.SP ·2026-10-16 ·Gosan Noh, Gebremeskel Seiley Abraha, Joshua Yabana, Nathaniel Foli, Michael Ankomah Asare +8 more
similarity 0.59
Abstract

Integrated sensing and communication (ISAC) is evolving from a primarily physical-layer research into a standardized cellular-network capability spanning channel modeling, radio procedures, network architecture, and the delivery of sensing services. We review this progression within the Third Generation Partnership Project (3GPP), from Release 19 service requirements and target-aware channel modeling to the Release 20 New Radio (NR) sensing evaluation framework, radio access network procedures, and system architecture, and discuss future directions toward 6G. We then present two 3GPP-aligned simulation case studies to demonstrate the corresponding evaluation approaches. The first case study compares hard-decision, soft-decision, and hybrid fusion for unmanned aerial vehicle (UAV) sensing using multiple transmission and reception points (TRPs). Detection, false alarms, and conditional position and velocity accuracy are evaluated using receiver-derived angle estimates and separately calibrated method-specific thresholds. The second case study compares ideal and practical sensing-assisted predictive handover with conventional handover, while accounting for sensing error and information age. We further present a testbed-based measurement study that characterizes monostatic and bistatic UAV radar cross sections across frequencies, platforms, and observation angles and provides empirical support for correlated target-response modeling. Finally, we discuss open challenges and future research directions in multi-node fusion, resource and interference management, network evolution, security, privacy, and reproducible evaluation. Together, these components connect calibrated channel models, link- and system-level simulation, real-time prototypes, controlled measurements, and field trials through a staged evaluation roadmap.

0.23

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.58
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Vehicle and UAV Detection and Tracking with LTE Downlink Reference Signals: A Ray-Traced Evaluation on a Mapped Suburban Site with Licensed Base-Station Records

cs.NI ·2026-11-01 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.58
Abstract · 18 pages, 7 figures, 14 tables. Revised version

Passive sensing on the cellular downlink places the receiver at the user equipment and changes nothing in the network. We report simulation results for an LTE band-3 cell-specific reference signal arm on a ray-traced channel. On a synthetic street canyon the arm is compared with an uplink sounding reference signal arm on the same band, target and scorer: missed-detection probabilities of 0.667 and 0.772. On a surveyed site built from OpenStreetMap footprints and the licensed site record, nine receiver positions along the street track the vehicle at coverage between 29.9 % and 61.7 %; a 283 m lap separates target height from trajectory at 1.6 to 30 m; a 137 m lap on the built-up street tracks a vehicle and a 15 m airborne target on every cell, and 8 receivers at 135 m spacing carry one illuminator's coverage over 1140 m of the street. Potential future work includes extending the analysis to multiple illuminators and varying receiver configurations, and confirmation through over-the-air measurements.

0.34

Cross-View Vision-Aided Proactive BS Selection and Beam Prediction for mmWave V2I Communications

eess.SP ·2026-09-01 ·Zijiao Hu, Haiyao Yu, Gaoyang Pang, Guangchen Wang, Litianyi Zhang +4 more
code/data similarity 0.58
Abstract

This paper investigates environmental-sensing-aided proactive base station (BS) selection and beam prediction for millimeter-wave (mmWave) vehicle-to-infrastructure (V2I) wireless systems. We exploit onboard panoramic street-view images and a preloaded satellite map to predict communication-relevant environmental information around the vehicle, including nearby building footprints and heights. The predicted height map provides a compact environmental prior and is combined with historical mobility information to jointly predict the next-slot line-of-sight (LoS) state, transmission rate, and transmit and receive beam selections. On our dataset covering different real-world regions across New South Wales, Australia, the proposed framework achieves 91.4% LoS classification accuracy, 0.638 bps/Hz mean absolute error of data rate prediction, and more than 40% higher transmission rate than the conventional reactive baseline in geographically unseen regions, outperforming all evaluated deployable learning-based baselines. The dataset and code will be released at https://github.com/Huzijiao/Cross-view_V2I

0.25

BeamGuard: Risk-Aware Multimodal Beam Forecasting and Adaptive Virtual Beamwidth Control for 6G mmWave V2I Links

eess.SP ·2026-08-26 ·Abidemi Orimogunje, Dejan Vukobratovic, Sunwoo Kim, Igbafe Orikumhi, Vukan Ninkovic +2 more
published similarity 0.56
Abstract · Accepted for Publication in IEEE Open Journal of the Communications Society . 18 pages, 5 figures, 11 Tables

Reliable beam management is a central challenge for 6G millimeter-wave (mmWave) vehicle-to-infrastructure (V2I) links, where narrow beams provide high array gain but are vulnerable to mobility-induced misalignment, blockage, and domain variation. BeamGuard is a multimodal sensing-aided beam-management framework that combines exteroceptive sensing with optional partial in-band mmWave power observations to forecast future beam distributions and select adaptive virtual beamwidth actions for reliable V2I control. It fuses camera, radar, LiDAR, GPS, and mmWave power observations with a temporal multimodal forecaster, then converts the predicted posterior into a beam center and virtual codebook-level beamwidth through a risk-aware planner. Here, virtual beamwidth denotes adjacent-beam coverage in the codebook index space rather than physical analog wide-beam synthesis. BeamGuard supports sensor-only operation for beam-training overhead reduction, limited in-band operation with masked beam-power entries, and full hybrid operation with sensing and communication-side measurements. We evaluate BeamGuard on DeepSense 6G Scenarios 32 and 33, with additional held-out tests on Scenarios 31 and 34, covering day--night training, transfer, limited adaptation, ablations, budget sweeps, and lightweight baselines. The full-hybrid anchor, used as the complete-system reference, achieves Top-1/Top-3/Top-5 accuracies of approximately \(0.393/0.778/0.897\), while the planner attains a threshold-based outage probability of about \(0.0060\) with a gain ratio of about \(0.895\). Matched-budget baselines further show that BeamGuard improves over multilayer perceptron, recurrent, and temporal convolutional predictors under comparable in-band observation settings. These results demonstrate robust, overhead-aware beam management through multimodal forecasting and risk-aware virtual beamwidth control.

0.64