CS Paper Radar

BeamGuard: Risk-Aware Multimodal Beam Forecasting and Adaptive Virtual Beamwidth Control for 6G mmWave V2I Links

Abidemi Orimogunje, Dejan Vukobratovic, Sunwoo Kim, Igbafe Orikumhi, Vukan Ninkovic, Evariste Twahirwa, Gaspard Gashema

eess.SP ·submitted 2026-08-26 06:45 UTC · v1
published

Abstract

Reliable beam management is a central challenge for 6G millimeter-wave (mmWave) vehicle-to-infrastructure (V2I) links, where narrow beams provide high array gain but are vulnerable to mobility-induced misalignment, blockage, and domain variation. BeamGuard is a multimodal sensing-aided beam-management framework that combines exteroceptive sensing with optional partial in-band mmWave power observations to forecast future beam distributions and select adaptive virtual beamwidth actions for reliable V2I control. It fuses camera, radar, LiDAR, GPS, and mmWave power observations with a temporal multimodal forecaster, then converts the predicted posterior into a beam center and virtual codebook-level beamwidth through a risk-aware planner. Here, virtual beamwidth denotes adjacent-beam coverage in the codebook index space rather than physical analog wide-beam synthesis. BeamGuard supports sensor-only operation for beam-training overhead reduction, limited in-band operation with masked beam-power entries, and full hybrid operation with sensing and communication-side measurements. We evaluate BeamGuard on DeepSense 6G Scenarios 32 and 33, with additional held-out tests on Scenarios 31 and 34, covering day--night training, transfer, limited adaptation, ablations, budget sweeps, and lightweight baselines. The full-hybrid anchor, used as the complete-system reference, achieves Top-1/Top-3/Top-5 accuracies of approximately \(0.393/0.778/0.897\), while the planner attains a threshold-based outage probability of about \(0.0060\) with a gain ratio of about \(0.895\). Matched-budget baselines further show that BeamGuard improves over multilayer perceptron, recurrent, and temporal convolutional predictors under comparable in-band observation settings. These results demonstrate robust, overhead-aware beam management through multimodal forecasting and risk-aware virtual beamwidth control.

Comment
Accepted for Publication in IEEE Open Journal of the Communications Society . 18 pages, 5 figures, 11 Tables

Closest papers

Nearest neighbours by meaning across the whole index.

Confidence-Guided Adaptive Beam Selection for Vision-Aided Beam Tracking in mmWave Systems

eess.SP ·2026-10-15 ·Sohani Munteha Hiam, Mohammad Soleymani, Rafael F. Schaefer
published similarity 0.64
Abstract · Accepted at IEEE Communications Letter

Vision-aided beam tracking reduces mmWave beam-training overhead by predicting beam indices from camera observations. Fixed top-$K$ selection, however, assigns the same candidate beam budget to all predictions, ignoring uncertainty variations across samples and horizons. This letter proposes confidence-guided adaptive candidate selection: predictor logits are temperature-calibrated, and the smallest top-ranked beam set whose cumulative probability reaches a target threshold is retained under a maximum budget. On DeepSense~6G Scenario~8, over five random seeds and at matched overhead, the policy improves candidate set accuracy by up to 3.80 percentage points, increases normalized received power by 0.32 percentage points, and reduces outage probability by 2.06 percentage points without retraining the predictor.

0.37

Cross-View Vision-Aided Proactive BS Selection and Beam Prediction for mmWave V2I Communications

eess.SP ·2026-09-01 ·Zijiao Hu, Haiyao Yu, Gaoyang Pang, Guangchen Wang, Litianyi Zhang +4 more
code/data similarity 0.63
Abstract

This paper investigates environmental-sensing-aided proactive base station (BS) selection and beam prediction for millimeter-wave (mmWave) vehicle-to-infrastructure (V2I) wireless systems. We exploit onboard panoramic street-view images and a preloaded satellite map to predict communication-relevant environmental information around the vehicle, including nearby building footprints and heights. The predicted height map provides a compact environmental prior and is combined with historical mobility information to jointly predict the next-slot line-of-sight (LoS) state, transmission rate, and transmit and receive beam selections. On our dataset covering different real-world regions across New South Wales, Australia, the proposed framework achieves 91.4% LoS classification accuracy, 0.638 bps/Hz mean absolute error of data rate prediction, and more than 40% higher transmission rate than the conventional reactive baseline in geographically unseen regions, outperforming all evaluated deployable learning-based baselines. The dataset and code will be released at https://github.com/Huzijiao/Cross-view_V2I

0.25

WM4ISAC: World Model for Proactive ISAC Under Dynamic Blockage

eess.SP ·2026-10-06 ·Zichao Xiao, Linlong Wu, Bhavani Shankar Mysore R
publishedtheory similarity 0.60
Abstract · Accepted to IEEE ISAC 2026

Dynamic blockage severely degrades vehicular integrated sensing and communication (ISAC), since narrow millimeter-wave beams must be adjusted before the line-of-sight (LoS) link is blocked or misaligned. This paper proposes WM4ISAC, a proactive ISAC framework built on a world model that learns a reusable latent dynamics model of the traffic environment from downlink radar heatmaps, rather than directly mapping observations to beam indices. The proposed framework uses a vision (V) module to compress sensing observations, an action-conditioned memory (M) module to predict latent environment evolution, and lightweight event heads to evaluate LoS alignment, blockage, and scatter-assisted non-line-of-sight (NLoS) alignment for candidate beams. A codebook-level controller then uses these event predictions to proactively switch between LoS and NLoS beams without knowing the future user or blocker states. Simulations under dynamic blockage show that WM4ISAC improves the mean rate by $28.9\%$ over current LoS tracking, raises the 5\%-tile rate from $0.9$ Mbps to $30.5$ Mbps, and reaches $88.7\%$ of the perfect-information upper bound.

0.32

Radar-Only Long-Term Beam Prediction in mmWave Vehicular Networks: An Empirical Study of Doppler Input and Cross-Modal Distillation

eess.SP ·2026-10-14 ·Jeongwan Kang, Miguel Bordallo López, Nhan Thanh Nguyen, Junhyeong Kim, Sunwoo Kim
similarity 0.59
Abstract · 13 pages, 6 figures, 3 tables; supplementary material (11 pages) as an ancillary file. This work has been submitted to the IEEE for possible…

Sensing-aided beam prediction could cut the beam-training overhead of millimeter-wave vehicular links, and two design choices could strengthen a radar-only predictor: a Doppler-resolved input and knowledge distilled from a camera during training. We measure what each is worth in received power rather than in top-1 accuracy, whose differences of a few points amount to only tenths of a decibel. We use real DeepSense 6G measurements, mainly at one roadside site, and one convolutional-recurrent predictor family evaluated open-loop up to 0.67 s ahead. Adding a range-Doppler map to the range-angle map lowers the mean beam-selection loss by 0.28 dB (95% bootstrap interval [0.14, 0.41]). The gain comes from the Doppler content, not from the extra input, and replicates, as pre-specified, at a second base station, although holding the last measured beam beats both predictors there. Cross-modal knowledge distillation from a motion-mask vision-radar teacher, by contrast, changes received power by -0.01 dB ([-0.07, +0.06]). The tested teacher, student, fusion and distillation variants show the same null in the metric each was scored on. Where distillation helps, in an exploratory run with few training passes, a radar-only teacher trained on all training passes reproduces most of the gain. For this predictor family and the full training set, the measurable gain at the link comes from Doppler-resolved radar content; no tested route for transferring training-only visual information adds a resolved gain.

0.55

RadioSight: Predictive mmWave XR Network Optimization from Dynamic Neural Radio Fields

cs.NI ·2026-08-30 ·Lihao Zhang, Paul Kudyba, Zhenlin An, Haijian Sun
top venue similarity 0.59
Abstract · Accepted to ACM MobiCom 2026. 21 pages, 20 figures, 3 tables

Next-generation extended reality (XR) networks rely on mmWave communication for multi-gigabit throughput, yet highly directional links are vulnerable to user mobility and blockages, causing frequent outages under reactive beam management. Emerging neural radio fields can predict radio propagation, but prior work remains limited to offline channel reconstruction. We introduce RadioSight, a real-time multi-modal radio field system for predictive mmWave optimization and proactive Multi-User MIMO beamforming. RadioSight combines backward beam-tracing with real-time semantic object synchronization to anticipate RF geometry changes without full model retraining. Implemented as an edge-executable pipeline for commercial 28 GHz arrays, RadioSight determines each scheduling window's beams during the preceding window without exhaustive beam sweeps. Experiments show that RadioSight reduces beam-search error by up to ~50%, improves median throughput by 2x, and enhances link stability.

0.55

Robust Beam Prediction for V2X Networks with Multi-Modal Sensing

cs.LG ·2026-09-09 ·Chen Shang, Dinh Thai Hoang, Diep N. Nguyen, Jiadong Yu
published similarity 0.59
Abstract · 6 pages, 3 figures

Integrated sensing and communication (ISAC) provides a promising foundation for beam prediction in future vehicle-to-everything (V2X) networks. However, existing sensing-assisted beamforming methods still rely heavily on radio-frequency sensing, which may become unreliable in complex vehicular environments. Meanwhile, the growing availability of heterogeneous sensors, such as cameras and LiDAR, offers new opportunities to improve beam prediction through richer environmental perception. Motivated by this, this paper proposes a multi-modal beam prediction framework for V2X networks. Specifically, we develop BeamTransFuser, a hierarchical Transformer-based architecture that progressively fuses camera, LiDAR, radar, and GPS observations for robust beam prediction. In addition, to handle possible missing modalities in practical deployment, we introduce a generative module that reconstructs missing modality features from the available observations. Experimental results on a real-world multi-modal V2X dataset show that the proposed framework consistently outperforms representative baselines, while the generative module further improves robustness under incomplete sensing conditions.

0.32

ISAC-Assisted Proactive Handover in mmWave Networks: Value of Foresight and Localization Requirements

eess.SY cs.NIeess.SP ·2026-11-02 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.56
Abstract

Millimeter-wave (mmWave) links can lose tens of decibels within milliseconds when a person or vehicle crosses the line of sight, and reactive handover recovers only after the outage has begun. Integrated sensing and communication (ISAC) promises to let the network see blockers coming and move users to another cell in advance. This paper asks how much such foresight is worth relative to the best reactive handover, and what sensing accuracy is needed to harvest it. We formulate cost-aware cell selection with knowledge of the future signal-to- noise ratio as a sequential decision problem, define the value of foresight through a policy-independent bound, and develop an ISAC-assisted handover framework in which a radio unit senses blockers with its own communication waveform and a simulated Open RAN xApp plans handovers. Ray-traced experiments in a 28 GHz street canyon, reported on held-out scenarios, show that, with a short look-ahead, perfect foresight closes most of the gap between service-aware (Layer-3) reactive handover and an instantaneous oracle. Harvesting this value, however, requires the user and nearby blockers to be localized to about a decimeter, well beyond what our radar tracker and meter- level user positioning provide; with realistic errors, even an uncertainty-aware planner largely defers to reactive handover.

0.43

Mobility- and Feedback-Aware Multi-Level Conflict-Triggered Hybrid Beamforming for Multi-User mmWave UAV Systems

eess.SP ·2026-09-14 ·Thuan Van Le, Nguyen Cong Luong, Xingwang Li, Vo Nguyen Quoc Bao, Ngo Hoang Tu
similarity 0.56
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

This paper investigates hybrid beamforming for multi-user large multiple-input multiple-output millimeter-wave unmanned aerial vehicle (UAV) downlink systems under mobility-induced channel aging and delayed beam-training feedback. Analog beam selection from compact delayed reports is a partial-observation decision, while additional candidate evaluations consume processing time and reduce the useful payload interval. We propose a mobility- and feedback-aware multi-level refinement strategy, termed MLR-TG, to improve robustness without always-on candidate search. Candidate subsets are ranked by a predicted net utility constructed from quantized complex coefficients of the reported codewords and the UAV mobility state, while the transmission regularized zero-forcing precoder is computed once from pilot-estimated effective channel state information (CSI) after analog selection. The refinement level is adaptively selected according to conflict severity and aging sensitivity. The selection rule is a two-statistic approximation of predicted-utility maximization, employs a system-size-invariant conflict score, and is calibrated offline on training data disjoint from evaluation. Simulations on a three-dimensional air-to-ground model with UAV attitude dynamics and common channel trajectories show that MLR-TG reduces system outage probability by 26.7% and improves the 5th-percentile user rate by 53.9% relative to greedy sector beamforming, while net spectral efficiency remains within 0.96%. Compared with always-on global top-3 refinement, MLR-TG improves net spectral efficiency by 5.5% while evaluating 77.9% fewer candidates, and remains within 3.4% of a noncausal-CSI level oracle in net spectral efficiency while requiring 86.9% fewer feedback bits than full-CSI reporting.

0.20