CS Paper Radar

Confidence-Guided Adaptive Beam Selection for Vision-Aided Beam Tracking in mmWave Systems

Sohani Munteha Hiam, Mohammad Soleymani, Rafael F. Schaefer

eess.SP ·submitted 2026-10-15 13:46 UTC · v1
published

Abstract

Vision-aided beam tracking reduces mmWave beam-training overhead by predicting beam indices from camera observations. Fixed top-$K$ selection, however, assigns the same candidate beam budget to all predictions, ignoring uncertainty variations across samples and horizons. This letter proposes confidence-guided adaptive candidate selection: predictor logits are temperature-calibrated, and the smallest top-ranked beam set whose cumulative probability reaches a target threshold is retained under a maximum budget. On DeepSense~6G Scenario~8, over five random seeds and at matched overhead, the policy improves candidate set accuracy by up to 3.80 percentage points, increases normalized received power by 0.32 percentage points, and reduces outage probability by 2.06 percentage points without retraining the predictor.

Comment
Accepted at IEEE Communications Letter

Closest papers

Nearest neighbours by meaning across the whole index.

BeamGuard: Risk-Aware Multimodal Beam Forecasting and Adaptive Virtual Beamwidth Control for 6G mmWave V2I Links

eess.SP ·2026-08-26 ·Abidemi Orimogunje, Dejan Vukobratovic, Sunwoo Kim, Igbafe Orikumhi, Vukan Ninkovic +2 more
published similarity 0.64
Abstract · Accepted for Publication in IEEE Open Journal of the Communications Society . 18 pages, 5 figures, 11 Tables

Reliable beam management is a central challenge for 6G millimeter-wave (mmWave) vehicle-to-infrastructure (V2I) links, where narrow beams provide high array gain but are vulnerable to mobility-induced misalignment, blockage, and domain variation. BeamGuard is a multimodal sensing-aided beam-management framework that combines exteroceptive sensing with optional partial in-band mmWave power observations to forecast future beam distributions and select adaptive virtual beamwidth actions for reliable V2I control. It fuses camera, radar, LiDAR, GPS, and mmWave power observations with a temporal multimodal forecaster, then converts the predicted posterior into a beam center and virtual codebook-level beamwidth through a risk-aware planner. Here, virtual beamwidth denotes adjacent-beam coverage in the codebook index space rather than physical analog wide-beam synthesis. BeamGuard supports sensor-only operation for beam-training overhead reduction, limited in-band operation with masked beam-power entries, and full hybrid operation with sensing and communication-side measurements. We evaluate BeamGuard on DeepSense 6G Scenarios 32 and 33, with additional held-out tests on Scenarios 31 and 34, covering day--night training, transfer, limited adaptation, ablations, budget sweeps, and lightweight baselines. The full-hybrid anchor, used as the complete-system reference, achieves Top-1/Top-3/Top-5 accuracies of approximately \(0.393/0.778/0.897\), while the planner attains a threshold-based outage probability of about \(0.0060\) with a gain ratio of about \(0.895\). Matched-budget baselines further show that BeamGuard improves over multilayer perceptron, recurrent, and temporal convolutional predictors under comparable in-band observation settings. These results demonstrate robust, overhead-aware beam management through multimodal forecasting and risk-aware virtual beamwidth control.

0.64

Radar-Only Long-Term Beam Prediction in mmWave Vehicular Networks: An Empirical Study of Doppler Input and Cross-Modal Distillation

eess.SP ·2026-10-14 ·Jeongwan Kang, Miguel Bordallo López, Nhan Thanh Nguyen, Junhyeong Kim, Sunwoo Kim
similarity 0.62
Abstract · 13 pages, 6 figures, 3 tables; supplementary material (11 pages) as an ancillary file. This work has been submitted to the IEEE for possible…

Sensing-aided beam prediction could cut the beam-training overhead of millimeter-wave vehicular links, and two design choices could strengthen a radar-only predictor: a Doppler-resolved input and knowledge distilled from a camera during training. We measure what each is worth in received power rather than in top-1 accuracy, whose differences of a few points amount to only tenths of a decibel. We use real DeepSense 6G measurements, mainly at one roadside site, and one convolutional-recurrent predictor family evaluated open-loop up to 0.67 s ahead. Adding a range-Doppler map to the range-angle map lowers the mean beam-selection loss by 0.28 dB (95% bootstrap interval [0.14, 0.41]). The gain comes from the Doppler content, not from the extra input, and replicates, as pre-specified, at a second base station, although holding the last measured beam beats both predictors there. Cross-modal knowledge distillation from a motion-mask vision-radar teacher, by contrast, changes received power by -0.01 dB ([-0.07, +0.06]). The tested teacher, student, fusion and distillation variants show the same null in the metric each was scored on. Where distillation helps, in an exploratory run with few training passes, a radar-only teacher trained on all training passes reproduces most of the gain. For this predictor family and the full training set, the measurable gain at the link comes from Doppler-resolved radar content; no tested route for transferring training-only visual information adds a resolved gain.

0.56

Cross-View Vision-Aided Proactive BS Selection and Beam Prediction for mmWave V2I Communications

eess.SP ·2026-09-01 ·Zijiao Hu, Haiyao Yu, Gaoyang Pang, Guangchen Wang, Litianyi Zhang +4 more
code/data similarity 0.60
Abstract

This paper investigates environmental-sensing-aided proactive base station (BS) selection and beam prediction for millimeter-wave (mmWave) vehicle-to-infrastructure (V2I) wireless systems. We exploit onboard panoramic street-view images and a preloaded satellite map to predict communication-relevant environmental information around the vehicle, including nearby building footprints and heights. The predicted height map provides a compact environmental prior and is combined with historical mobility information to jointly predict the next-slot line-of-sight (LoS) state, transmission rate, and transmit and receive beam selections. On our dataset covering different real-world regions across New South Wales, Australia, the proposed framework achieves 91.4% LoS classification accuracy, 0.638 bps/Hz mean absolute error of data rate prediction, and more than 40% higher transmission rate than the conventional reactive baseline in geographically unseen regions, outperforming all evaluated deployable learning-based baselines. The dataset and code will be released at https://github.com/Huzijiao/Cross-view_V2I

0.25

RadioSight: Predictive mmWave XR Network Optimization from Dynamic Neural Radio Fields

cs.NI ·2026-08-30 ·Lihao Zhang, Paul Kudyba, Zhenlin An, Haijian Sun
top venue similarity 0.58
Abstract · Accepted to ACM MobiCom 2026. 21 pages, 20 figures, 3 tables

Next-generation extended reality (XR) networks rely on mmWave communication for multi-gigabit throughput, yet highly directional links are vulnerable to user mobility and blockages, causing frequent outages under reactive beam management. Emerging neural radio fields can predict radio propagation, but prior work remains limited to offline channel reconstruction. We introduce RadioSight, a real-time multi-modal radio field system for predictive mmWave optimization and proactive Multi-User MIMO beamforming. RadioSight combines backward beam-tracing with real-time semantic object synchronization to anticipate RF geometry changes without full model retraining. Implemented as an edge-executable pipeline for commercial 28 GHz arrays, RadioSight determines each scheduling window's beams during the preceding window without exhaustive beam sweeps. Experiments show that RadioSight reduces beam-search error by up to ~50%, improves median throughput by 2x, and enhances link stability.

0.55

Few-Shot Beam Selection for Embodied AI via In-Context Learning and Conformal Prediction

eess.SP ·2026-11-05 ·Weicao Deng, Ruihan Li, Feihang Xu, Min Li
similarity 0.56
Abstract · 6 pages, 4 figures. Accepted by the 2026 IEEE International Symposium on Information Theory Workshop (ISIT 2026 Workshop) on Reliable Machin…

Millimeter-wave (mmWave) communications are essential for supporting massive multimodal sensory data exchange in Embodied Artificial Intelligence (EAI) systems. However, fast and reliable beam selection for mmWave communication remains a critical bottleneck due to the prohibitive overhead associated with conventional beam training. Although location-aided beam prediction offers a promising alternative, its performance is often limited by localization errors and the need for extensive training data. To address these challenges, we propose a novel framework termed In-Context Learning driven Cross-Validation Conformal Prediction (ICL+CVCP) for beam prediction. The proposed framework utilizes the training-free adaptation capability of ICL, enabling effective operation with only a small number of demonstration samples and eliminating the need for large-scale data collection and model fine-tuning. In addition, the CVCP module constructs compact, distribution-free candidate beam sets that provably contain the optimal beam with a user-defined probability. Experimental results confirm that ICL+CVCP consistently satisfies the desired empirical coverage while significantly reducing pilot overhead and computational latency, thereby meeting the stringent reliability and efficiency requirements of EAI applications.

0.28

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.56
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Freshness-Aware Constrained Sensing-Aided Beam Prediction with Knowledge Distillation

eess.SP ·2026-09-01 ·Abolfazl Zakeri, Nhan Thanh Nguyen, Ahmed Alkhateeb, Markku Juntti
similarity 0.55
Abstract · Submitted for possible publication

Beam prediction leveraging environmental data reduces over-the-air beam training overhead. Existing frameworks, however, assume continuous access to fresh sensory data, an assumption that breaks down under sensing budget constraints or sensor failures. To make this more practical, this paper proposes a sensing-aided beam prediction framework that operates under an average sensing rate constraint. We incorporate the age of information (AoI) directly into the beam prediction pipeline as a synthetic input modality: the age of the most recently captured data is encoded and fused with visual features through a gating mechanism. This provides the predictor with explicit context information about input sensory data reliability. We formalize and examine three fixed sampling policies, accumulated, uniform, and randomized, under the average sensing budget. We further develop a knowledge distillation (KD) framework that operates as a robustness regularizer rather than a pure model compression method. In particular, the high-capacity teacher is trained unconstrained on fully sampled data, and its representational knowledge is transferred to a compact student deployed under the sensing budget. We conduct numerical experiments on the DeepSense 6G data set. The results show that AoI fusion nearly doubles top-1 accuracy at strict sensing budgets, and age-aware models achieve near-optimal top-3 accuracy with only 20% of the data. Furthermore, we find that the teacher training regime is a more consequential design choice than the distillation loss function.

0.37

RayAR: Autoregressive Dominant Path Generation for Low-Overhead MIMO Beam Alignment

eess.SP ·2026-10-31 ·Junxi Huang, Xiucheng Wang, Nan Cheng, Kailong Wang, Jiang Guo +1 more
similarity 0.54
Abstract

Beam alignment in multiple-input multiple-output (MIMO) systems requires selecting suitable transmit and receive beam pairs with limited measurement overhead. Although 3GPP Release 18 investigates beam prediction from partial measurements, collecting these measurements still incurs probing overhead. Geometry can focus this probing through the departure and arrival directions of dominant paths, whose identification requires accounting for coupled diffraction interactions. To address this challenge, we propose RayAR, an autoregressive method that generates dominant propagation paths from urban geometry. RayAR conditions candidate ranking on the path prefix, local diffraction geometry, and receiver reachability, updating this context after each selection until the receiver becomes visible. The completed path's departure and arrival directions rank beam pairs for probing, allowing the pair with the highest received power to be selected from a small candidate set. Under 3GPP Release 18 beam-management metrics, RayAR reduces probing by 96.88\% relative to exhaustive sweeping and achieves the highest optimal-pair hit rate among compared methods at the same budget. Real-world measurements further demonstrate the accuracy of this geometric guidance, with simulation-trained RayAR achieving the lowest departure and arrival angular errors among compared methods without fine-tuning and a mean arrival-direction error of 9.07$^\circ$.

0.36