CS Paper Radar

RayAR: Autoregressive Dominant Path Generation for Low-Overhead MIMO Beam Alignment

Junxi Huang, Xiucheng Wang, Nan Cheng, Kailong Wang, Jiang Guo, Yuxiang Zhang

eess.SP ·submitted 2026-10-31 02:36 UTC · v1

Abstract

Beam alignment in multiple-input multiple-output (MIMO) systems requires selecting suitable transmit and receive beam pairs with limited measurement overhead. Although 3GPP Release 18 investigates beam prediction from partial measurements, collecting these measurements still incurs probing overhead. Geometry can focus this probing through the departure and arrival directions of dominant paths, whose identification requires accounting for coupled diffraction interactions. To address this challenge, we propose RayAR, an autoregressive method that generates dominant propagation paths from urban geometry. RayAR conditions candidate ranking on the path prefix, local diffraction geometry, and receiver reachability, updating this context after each selection until the receiver becomes visible. The completed path's departure and arrival directions rank beam pairs for probing, allowing the pair with the highest received power to be selected from a small candidate set. Under 3GPP Release 18 beam-management metrics, RayAR reduces probing by 96.88\% relative to exhaustive sweeping and achieves the highest optimal-pair hit rate among compared methods at the same budget. Real-world measurements further demonstrate the accuracy of this geometric guidance, with simulation-trained RayAR achieving the lowest departure and arrival angular errors among compared methods without fine-tuning and a mean arrival-direction error of 9.07$^\circ$.

Closest papers

Nearest neighbours by meaning across the whole index.

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.61
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

Receiver-Resolution APS-PDP Maps for Wireless Channels: Benchmarking and Coarse-to-Fine Modeling

cs.AI eess.SP ·2026-11-07 ·Peilin Zheng, Haozhe Jia, Xiucheng Wang, Wenshuo Chen, Nan Cheng
benchmark similarity 0.59
Abstract · 18 pages, 6 figures

Angle Power Spectrum (APS) and Power Delay Profile (PDP) are receiver-facing spectra that govern beam selection and wideband equalization. Most ray-tracing benchmarks provide supervision as variable-size multipath component lists. This format does not match practical receivers, whose angular and delay resolutions are limited by array aperture and system bandwidth. As a result, learning targets are ambiguous and evaluations can change with reconstruction conventions. We introduce UrbanADPSMap, a benchmark that converts ray-traced supervision into fixed-grid APS and PDP targets by explicitly modeling bandwidth-limited and aperture-limited response kernels. By fixing the receiver-domain kernels, discretization, and validity mask, UrbanADPSMap removes reconstruction-induced target ambiguity and stabilizes downstream evaluation across methods. Built on this benchmark, we propose SpecFlowAR, a coarse-to-fine generator based on multi-scale autoregressive flow matching. The model first captures coarse dispersion structure and then refines beam-relevant peaks and low-power tails. The number of function evaluations controls the sampling budget, enabling latency and quality to be adjusted for dense spectrum queries. Experiments on the test set show that SpecFlowAR reduces BPL@5 to 2.03 dB under a unified NFE=80 budget, while improving beam utility and reducing errors of 3GPP dispersion statistics.

0.29

RadioSight: Predictive mmWave XR Network Optimization from Dynamic Neural Radio Fields

cs.NI ·2026-08-30 ·Lihao Zhang, Paul Kudyba, Zhenlin An, Haijian Sun
top venue similarity 0.59
Abstract · Accepted to ACM MobiCom 2026. 21 pages, 20 figures, 3 tables

Next-generation extended reality (XR) networks rely on mmWave communication for multi-gigabit throughput, yet highly directional links are vulnerable to user mobility and blockages, causing frequent outages under reactive beam management. Emerging neural radio fields can predict radio propagation, but prior work remains limited to offline channel reconstruction. We introduce RadioSight, a real-time multi-modal radio field system for predictive mmWave optimization and proactive Multi-User MIMO beamforming. RadioSight combines backward beam-tracing with real-time semantic object synchronization to anticipate RF geometry changes without full model retraining. Implemented as an edge-executable pipeline for commercial 28 GHz arrays, RadioSight determines each scheduling window's beams during the preceding window without exhaustive beam sweeps. Experiments show that RadioSight reduces beam-search error by up to ~50%, improves median throughput by 2x, and enhances link stability.

0.55

Vehicle and UAV Detection and Tracking with LTE Downlink Reference Signals: A Ray-Traced Evaluation on a Mapped Suburban Site with Licensed Base-Station Records

cs.NI ·2026-11-01 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.58
Abstract · 18 pages, 7 figures, 14 tables. Revised version

Passive sensing on the cellular downlink places the receiver at the user equipment and changes nothing in the network. We report simulation results for an LTE band-3 cell-specific reference signal arm on a ray-traced channel. On a synthetic street canyon the arm is compared with an uplink sounding reference signal arm on the same band, target and scorer: missed-detection probabilities of 0.667 and 0.772. On a surveyed site built from OpenStreetMap footprints and the licensed site record, nine receiver positions along the street track the vehicle at coverage between 29.9 % and 61.7 %; a 283 m lap separates target height from trajectory at 1.6 to 30 m; a 137 m lap on the built-up street tracks a vehicle and a 15 m airborne target on every cell, and 8 receivers at 135 m spacing carry one illuminator's coverage over 1140 m of the street. Potential future work includes extending the analysis to multiple illuminators and varying receiver configurations, and confirmation through over-the-air measurements.

0.34

A Sub-Aperture-Based Ray-Tracing Framework for Near-Field U-MIMO THz Communications

eess.SP ·2026-10-28 ·Federico Ruggeri, Sotiris Droulias, Jiming Chen, Angeliki Alexiou, Jie Zhang
similarity 0.58
Abstract · 5 pages, 5 figures, submitted to EUCaP27

Terahertz (THz) communications are characterized by antennas with large apertures and extended near-field (NF) region, offering the opportunity to develop adaptable beam manipulation strategies, particularly related to ultra-massive MIMO (U-MIMO). While Ray-Tracing (RT) offers an attractive alternative to full-wave methods, conventional ray-based approaches are generally formulated under far-field (FF) assumptions. We propose a technique that extends RT to the NF regime, enabling ray-based NF characterization of transmitting arrays. We model the transmitting array as an antenna aperture and develop a RT framework that partitions the transmitting aperture into sub-apertures emitting FF contributions which can be propagated via geometric optics (GO). We develop a Ray-Launching algorithm based on the proposed framework and assess its beam-reconstruction accuracy against full-wave propagation. The results demonstrate that, through tunable aperture partitioning, the proposed approach can reproduce beam manipulation effects characteristic of NF U-MIMO THz communications using GO ray propagation.

0.35

Beam-STeP: Generative Site-Specific Beam Prediction with Spatio-Temporal Priors

eess.SP ·2026-10-14 ·Ziyue Wang, Zongyao Zhao, Zhaolin Wang, Yuanwei Liu
similarity 0.58
Abstract

A generative site-specific beam prediction (Beam-STeP) method is proposed. Spatial priors from site-specific propagation and mobility information are jointly exploited with temporal priors from historical beam observations for beam prediction. To address the beam prediction ambiguity from multimodal spatio-temporal priors, the generative model is adopted, where a history-conditioned diffusion model is proposed to learn the multimodal conditional distribution of future beamforming vectors. Multiple beam candidates are sampled from the distribution using a denoising diffusion implicit model (DDIM). The candidate with the highest received power is then selected for transmission. Simulation results across three urban scenarios demonstrate that: i) Beam-STeP generally achieves higher normalized beamforming gains than the baselines under the same probing budget, particularly as beam prediction progresses; ii) site-specific propagation and mobility priors improve recursive beam prediction performance; and iii) DDIM sampling enables a flexible gain-latency trade-off.

0.19

Physics-Guided Bayesian Optimization for High-Dimensional Mixed-Variable MIMO Base Station Design

eess.SP cs.NI ·2026-10-01 ·Koki Kanzaki, Koya Sato
similarity 0.58
Abstract · 6 pages, 4 figures. This work has been submitted to the IEEE for possible publication

This paper proposes a physics-guided Bayesian optimization for high-dimensional mixed-variable multiple-input and multiple-output (MIMO) base station (BS) design. The considered problem jointly selects a subset of candidate sites for BS deployment and optimizes the azimuth angles, downtilt angles, and transmit power spectral densities of the BSs, while each configuration is evaluated using computationally expensive site-specific ray tracing. To efficiently optimize the system configuration, the proposed method constructs a low-cost physics-based proxy from precomputed propagation information. The proxy-estimated communication coverage is used as the Gaussian process (GP) prior mean, and a residual GP with three-dimensional physical features learns the discrepancy between the proxy and full evaluations. Ray-tracing-based evaluations in two urban scenarios show that the proposed method achieves up to approximately 15 percentage points higher coverage than conventional and high-dimensional optimization baselines under the same evaluation budget.

0.28

Link Both Views: Cross-Image Routing Attention for Dual-Endpoint V2I Beam-Pair Power Prediction

eess.SP cs.LG ·2026-10-13 ·Shiliang Lu, Lu Bai, Ziwei Huang, Xiang Cheng
similarity 0.57
Abstract

For sensing-aided communications, single-endpoint sensing offers only a partial view of propagation, motivating link-centric sensing across both endpoints. We propose cross-image routing attention (CIRA) for sparse association and mutual enhancement of propagation-relevant features from dual-endpoint RGB images. Building on CIRA, CiFormer predicts millimeter-wave (mmWave) beam-pair power matrices for vehicle-to-infrastructure (V2I) communications. Experiments show that CiFormer reduces mean absolute error and improves top-1 beam-pair selection accuracy by 3.15 percentage points over the strongest baseline. Visualizations and ablation studies support dual-endpoint sensing and selective cross-view interaction in capturing propagation-relevant dependencies, suggesting broader applications in wireless tasks beyond beam prediction.

0.20