CS Paper Radar

Digital Twin-Conditioned RSS-Fingerprint Localization in Cell-Free Millimeter-Wave Networks

Varun S. Advani, Khalid Kanaan, Ahmed Nasser, Mohamed Y. Selim, Ahmed M. Eltawil

cs.NI eess.SP ·submitted 2026-10-14 21:01 UTC · v1

Abstract

Digital twins (DTs) can generate dense synthetic fingerprints for localization via ray tracing, yet the sim-to-real domain gap limits their direct use, particularly in cell-free millimeter-wave (mmWave) deployments where distributed geometries and blockage-induced sparsity widen the mismatch. We propose DT-conditioned (DTCond), a framework that fuses real and DT beam-domain fingerprints as complementary inputs through per-domain encoders, learnable per-access point (AP) attention, and calibrated uncertainty. We derive oracle and pipeline Cramér-Rao bounds (CRBs) for DT-aided fingerprint localization, proving that DT information strictly tightens the positioning bound whenever spatial structure is preserved, with a heteroscedastic refinement that tightens the bound by a further 9.1%. On a real 28 GHz cell-free testbed, the deployable two-stage pipeline, which reads the DT fingerprint at a coarse k-nearest neighbor (k-NN) estimate, achieves 0.284 m mean error against 0.313 m for real-only k-NN. With the DT fingerprint read at the true position (oracle input), DT conditioning achieves 0.186 m mean error, validated through a ten-method ablation against domain-adaptation (DA) and transfer-learning baselines, and a 48% improvement on unseen regions. Multi-user self-attention provides 31-41% per-user gain for emulated simultaneous users, and progressive calibration reduces the measurement budget by 50%. As a use case, localization drives network configuration in closed loop. Between beam sweeps, a DT updated from measured RSS and read at the tracked position estimate selects the 3 of 81 beam pairs that each AP trains. With 49 calibration anchors in the update, the mean beam-selection loss stays below 1 dB over 2 m of motion, whereas reusing the last sweep loses 2.7 dB after 1 m.

Comment
16 pages, 14 figures, 7 tables. Under review at IEEE Journal on Selected Areas in Communications

Closest papers

Nearest neighbours by meaning across the whole index.

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.65
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.60
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

Digital Twin-Assisted Fast Beam Alignment for mmWave MIMO Networks

cs.IT cs.LGcs.NI ·2026-10-31 ·Muhammad Kamran Saeed, Ashfaq Khokhar
hot direction similarity 0.60
Abstract

Millimeter-wave (mmWave) communication relies on directional beam sweeping for initial access, which incurs substantial latency and signaling overhead as antenna arrays grow large and deployments become denser. Machine-learning-based beam prediction can reduce this overhead, but its effectiveness depends on training data that accurately reflects the deployment environment, a requirement that is difficult to meet in practice. This paper presents a latency-aware beam management architecture that integrates digital-twin-assisted prediction, regionbased localization, weighted ensemble learning, and explainability-driven beam pruning into a unified framework. A digital twin (DT) generates site-specific ray-traced channel knowledge offline, enabling environment-aware beam prediction without exhaustive real-world measurements and supporting both initial access and beam tracking. The proposed ensemble learning scheme combines a base classifier and a specialist classifier through reliability-weighted fusion to improve prediction accuracy and robustness, while explainable artificial intelligence (XAI)-based attribution pruning reduces the beam codebook to a small subset of the most informative beams for beam allocation. To capture the distributional mismatch between the DT and real-world environments: the network was trained on imperfect digital-twin data but evaluated on real-world surrobase data. Results show that the proposed method achieves 96.80% top-1 and 98.36% top-3 beam prediction accuracy, while reducing over-the-air sounding overhead by nearly an order of magnitude relative to exhaustive sweeping, outperforming convolutional and deep neural network baselines from prior work.

0.34

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.60
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Integrated Sensing and Communication via Channel Knowledge Maps Built from Beam Feedback Coefficients

eess.SP ·2026-10-29 ·Chongda Huang, Yue Xiao, Gang Wu, Vladimir Poulkov, Xianfu Lei +1 more
similarity 0.59
Abstract

Channel knowledge maps (CKMs) support wireless localization by linking channel features to user locations. Detailed channel fingerprints, however, can require substantial storage. This paper proposes a CKM-based localization framework that uses beam feedback coefficients collected during communication. These coefficients serve as compact location fingerprints within the beam management process, without requiring full channel feedback or additional sensing measurements. Using a coarse position prior, the base station searches nearby CKM entries and refines the location estimate through local interpolation. We analyze the relationship between spatial fingerprint variation and localization accuracy, and evaluate the effect of feedback quantization. Simulations show favorable storage--accuracy trade-offs relative to dense and sparsified spectral fingerprinting in the tested multipath environments.

0.33

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.58
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Low-Complexity Wideband Channel Estimation for ISAC in Analog Millimeter-Wave Systems

eess.SP ·2026-10-23 ·Hamza Touati, Raffaele Viterbo, Mattia Brambilla, Sandra Roger, Carmen Botella-Mascarell
published similarity 0.57
Abstract · Accepted for publication in the 2026 IEEE 1st Annual Integrated Sensing and Communication Conference (ISAC)

Accurate wideband channel estimation is a key enabler for millimeter-wave (mmWave) integrated sensing and communication (ISAC) systems. In the narrowband scenario, the Transformed Spatial Domain Channel Estimation (TSDCE) method was previously shown to provide fast and accurate angle estimation with substantially lower complexity than conventional compressed-sensing approaches based on orthogonal matching pursuit (OMP). However, wideband ISAC scenarios additionally require delay estimation, making joint angle-delay sparse recovery computationally expensive due to the multidimensional dictionary search. In this paper, we propose a wideband extension of TSDCE, namely TSDCE-TD, which incorporates time-domain support and decouples angle and delay estimation. Two variations are proposed for delay estimation: TSDCE-TD (Dict), which uses a one-dimensional delay dictionary, and TSDCE-TD (FFT), which applies Fast Fourier Transform (FFT) zero-padding interpolation. Path estimates are iteratively refined through successive interference cancellation and alternating angle-delay updates. Simulation results show that the proposed methods outperform OMP-based baselines under practical dictionary sizes, while achieving comparable performance at high-resolution settings with substantially lower computational complexity. Moreover, the angle-delay estimates obtained using the proposed approach enable accurate single-anchor indoor localization in a ray-traced environment, achieving sub-20 cm positioning errors and satisfying practical indoor positioning requirements.

0.27

A Ray-Traced Digital Twin for 5G NR Positioning with OpenAirInterface

cs.IT ·2026-10-09 ·Nima Chaharbaghi, Florian Kaltenberger, Bartosz Podrygajlo, Rakesh Mundlamuri, Roberto Verdone
similarity 0.55
Abstract · submitted at 22nd Wireless On-demand Network systems and Services Conference

Evaluating 5G positioning on a physical testbed ties every measurement to one propagation environment and one antenna layout, so any question about an alternative deployment requires a new field campaign. We present a ray-traced digital twin of the GEO-5G testbed at EURECOM that drives an unmodified OpenAirInterface (OAI) 5G stack with per-antenna channels computed by Sionna-RT over a 3D model of the site. The distributed gNB antennas are modelled as independent radio devices rather than as elements of a compact array, which preserves the per-antenna absolute delays on which time-difference-of-arrival (TDoA) positioning depends. With them preserved, the twin drives OAI's SRS-based UL-TDoA pipeline to metre-level accuracy consistent with that reported for the physical deployment. We then use the twin to answer a question the physical testbed cannot. Widening the carrier truncates the tail of the horizontal error distribution without improving a typical position, and leaves the vertical error untouched, because the latter is limited by the array geometry rather than by the measurement. That limit is predictable from the antenna coordinates alone, and a height-diverse layout reduces the RMS height error by a factor of four.

0.20