CS Paper Radar

Positioning with Flexible Reflectors: Solution and Performance Analysis

Jiajun He, Han Yu, Danyan Lin, Gaofeng Pan, Hing Cheung So, Stefano Buzzi, Hien Quoc Ngo

cs.IT ·submitted 2026-08-14 10:58 UTC · v1
publishedtheory

Abstract

Flexible reflectors (FRs) have emerged as a low-cost and energy-efficient solution for reshaping electromagnetic propagation environments across a wide range of applications. This paper investigates FR-swarm-assisted target localization in scenarios where line-of-sight (LoS) paths are unavailable. By leveraging the virtual LoS paths created by the FRs, a simple yet accurate estimator is proposed for localization under severe blockage conditions. To characterize the performance limits of the proposed scheme, we derive the Cramer-Rao lower bound (CRLB) and use it to optimize the positions and orientations of the FRs. Furthermore, by accounting for random FR deployment, we characterize the CRLB distribution and reveal how different network configurations affect localization accuracy. Simulation results demonstrate that the developed scheme closely approaches the CRLB performance, while the derived analytical results provide useful guidelines for FR deployment and network design.

Closest papers

Nearest neighbours by meaning across the whole index.

Robustness Guarantees for Optimal RIS Placement in Self-Localization Under Placement Errors

eess.SP ·2026-09-23 ·Mahdi Koloushani, Omid Rezaei, Seyed Mohammad Karbasi, Mohammad Mahdi Naghsh, Mohammad Mahdi Nayebi
theory similarity 0.61
Abstract

This paper studies the effect of Reconfigurable Intelligent Surface (RIS) placement errors on optimal RIS deployment for Time-of-Flight (ToF)-based self-localization. We consider a setup in which a source transmits a signal, receives the RIS-reflected echo, and estimates its own position from the corresponding ToF measurements. Under the conditions of moderate, i.i.d. Gaussian RIS position errors and i.i.d. Gaussian ToF noise, we demonstrate that the placement uncertainty manifests as a geometry-independent scaling factor in the Cramér-Rao Bound (CRB). Consequently, we prove that the optimal RIS placement remains unchanged by the presence of RIS position errors. This result is established for A-, D-, and E-optimality criteria. Simulation results verify the analysis and show that optimized RIS deployments retain their advantage even in the presence of placement uncertainty.

0.20

Turning Multipath into Positioning Information: Persistent Electromagnetic-Twin DoA Localization

eess.SP ·2026-10-29 ·Tuo Wu, Zhentian Zhang, Ye Tian, Hing Cheung So
similarity 0.61
Abstract · 13 pages, 11 figures

Reflected paths can support localization when line-of-sight (LoS) links are blocked, but their usefulness depends on how accurately the stored model predicts their directions. This paper develops electromagnetic-twin (ET) direction-of-arrival (DoA) localization with a persistent, physically calibrated path-angle field. A nominal floor plan supplies virtual-path geometry, and sparse reference probes at known positions learn a compact directional correction. Field order and regularization are selected from calibration data alone. For each user, unordered DoAs are processed by joint position estimation and one-to-one path association, using assignment-aware multistart search and robust Gauss--Newton refinement. New trusted probes update the stored correction through recursive least squares (RLS), without reprocessing all previous measurements. The analysis establishes calibration rank conditions, objective descent, and conditional information gains from reflected paths, while also distinguishing the decay of initialization bias from the convergence of localization error. Synthetic experiments use 500 queries per operating point. At 50% LoS blockage and $1.5^\circ$ DoA error, the calibrated ET achieves 0.39 m root-mean-square error, versus 0.55 m for nominal geometry. After a wall change, its final error is 0.43 m, versus 0.63 m for a frozen calibrated map. Equal-evidence comparisons show competitive calibrated alternatives and faster abrupt-change recovery with sliding-window updates than with the configured RLS. The results support reusable directional calibration, not a universally superior map or update rule, and validation is limited to synthetic first-order reflections with trusted calibration labels.

0.39

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.59
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

NLOS-Aware TDOA-Based UAV Localization: Cramér-Rao Bounds, Measurement Modeling, and Experimental Validation

eess.SP ·2026-10-21 ·Cole Dickerson, Saad Masrur, Özgür Özdemir, Ismail Güvenç
similarity 0.58
Abstract · Submitted to IEEE Transactions on Aerospace and Electronic Systems (TAES) on October 21st, 2026

Passive time-difference-of-arrival (TDOA) localization is well suited for tracking non-cooperative unmanned aerial vehicles (UAVs) that do not report their positions. However, its accuracy degrades under the mixed line-of-sight (LOS) and non-line-of-sight (NLOS) propagation that is typical of low-altitude flight. In this paper, we develop NLOS-aware Cramér--Rao lower bounds (CRLBs) and an empirically calibrated measurement model for TDOA-based UAV localization, and we evaluate both with measurements from five UAV flights on the Aerial Experimentation and Research Platform for Advanced Wireless (AERPAW). The analysis yields an identifiability condition that relates the number of sensors to the number of NLOS links, together with a bias-induced error floor that a wider bandwidth cannot remove. The model parameters are estimated by matching simulated and measured error distributions. Experimental results show that the error depends most strongly on the number of sensors in LOS, while a higher altitude and a wider bandwidth lower the median error. Relocating a sensor that is always in NLOS into the open flight area can lower the median horizontal bound by two orders of magnitude if the relocated sensor is in LOS. The fitted model reproduces the median errors of the 2.5 MHz and 5 MHz flights but underestimates the heaviest error tails. Finally, rejecting outlier fixes lowers the error far more than Kalman or particle filtering, because the remaining error is dominated by bias.

0.30

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.56
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Optimal Movable-Antenna Control for Multi-Path Sensing Guided by Prior AoA Statistic

cs.IT ·2026-08-10 ·Jaehong Kim, Changsheng You, Jihong Park, Seung-Woo Ko
benchmark similarity 0.56
Abstract

Multi-path sensing, which aims to extract the geometric attributes of multiple propagation paths, is expected to be a key functionality of 6G. A movable antenna (MA) can enable this functionality by synthesizing an aperture through mechanical motion. However, existing MA-based sensing methods typically rely on exhaustive scanning over the entire movable region, resulting in significant control overhead and sensing latency, which limit their practicality for agile sensing. To address this challenge, this paper develops a prior-guided agile multi-path sensing framework that leverages weak prior angle-of-arrival (AoA) statistics as side information. The proposed framework is built on two key steps. First, the movable plate's three-dimensional orientation is optimized only once to configure a mechanically feasible scan region that enhances path visibility while preserving inter-path discriminability, guided by Fisher information analysis. Second, given the optimal plate orientation, the MA performs only two linear scans, whose non-collinear spatial phase projections are fused with the prior AoA statistics through a maximum a posteriori (MAP)-based estimator to recover the elevation and azimuth AoAs of multiple paths. The estimated AoAs are subsequently used to extract the times-of-arrival (ToAs) by enhancing the target path component while suppressing interference from other paths. With only one orientation adjustment and two linear scans, the proposed framework enables agile multi-path sensing with significantly reduced control overhead and latency, while achieving AoA and ToA estimation accuracy close to the single-path benchmark.

0.04

Physical-Layer Aspects of Repeater-Assisted MIMO

eess.SP ·2026-09-24 ·Diana P. M. Osorio, Kohei Ueda, Anubhab Chowdhury, Hiroki Iimori, Yuto Hama +2 more
similarity 0.56
Abstract · 6 pages, 4 figures, submitted to the IEEE for possible publication

Network-controlled repeaters (NCRs) are emerg- ing as low-cost, band-selective active scatterers that can re- shape the wireless propagation environment without backhaul or tight phase synchronization. We study physical-layer design for repeater-assisted multiple-input multiple-output (RA-MIMO) networks, such as hardware impairments, gain and activation control, duplexing, channel-state information acquisition, and wideband delay effects. We then discuss integrated sensing and communication (ISAC), where repeaters can extend non- line-of-sight (NLoS) visibility, improve target observability, and enhance weak-echo detection. These gains, however, are limited by amplified noise, clutter, feedback, and calibration errors, motivating joint optimization and gain control frameworks for swarm repeater deployments within ISAC.

0.26

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.56
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50