CS Paper Radar

CFAR Detection on Non-Coherently Integrated Angular Maps for mmWave Radio SLAM

Paolo Tosi, Ossi Kaltiokallio, Marcus Henninger, Silvio Mandelli, Mikko Valkama

eess.SP ·submitted 2026-11-10 16:00 UTC · v1

Abstract

Reliable multipath detection is essential for millimeter-wave simultaneous localization and mapping (SLAM), where propagation paths reflecting off the environment provide geometric constraints beyond the dominant line-of-sight component. This paper develops constant false alarm rate (CFAR)-based detectors for beam-swept bistatic integrated sensing and communications (ISAC). Starting from conventional CFAR on the I/Q datacube, we derive a modified detector for non-coherently integrated angular power maps, where the post-integration noise statistics differ from those assumed by standard cell-averaging CFAR. To improve practicality, we introduce a multi-cell cell-under-test formulation and a plus-shaped training window that reduces computational cost while accounting for sidelobe structure. The proposed methods are evaluated on experimental 60 GHz indoor measurements using a snapshot-SLAM estimator. Compared with a singular value decomposition (SVD)-based detector, the proposed CFAR approaches reduce the overall positioning RMSE from 0.30 m to 0.24-0.26 m, with the largest improvement in non-line-of-sight snapshots. The multi-cell non-coherent detector further lowers the computational complexity without degrading positioning accuracy, demonstrating its suitability for practical multipath radio-SLAM.

Comment
6 pages, 4 figures, 1 table. This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.64
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

Distributed ISAC-Enabled Multimodal Recovery of Missing 2-D LiDAR Measurements

eess.SY ·2026-09-19 ·Mohammed E Eltayeb
similarity 0.63
Abstract

Recovering missing regions in 2-D LiDAR scans is crucial for maintaining geometric awareness in environmental sensing. LiDAR-only reconstruction relies on measurements surrounding the missing region and can degrade as the unobserved sector grows or the surface geometry becomes more complex. This paper presents a distributed integrated sensing and communication (ISAC) framework that uses directional 60-GHz beam-training measurements from multiple receivers to assist in the recovery of missing regions in 2-D LiDAR scans. Transmitter and receiver positions, beam directions, and relative beam-power thresholding are used to construct an RF-derived surface prior without requiring RF time-of-flight measurements. The resulting RF-derived range estimates are then fused with LiDAR measurements to estimate the missing geometry. The proposed framework is evaluated in an indoor environment using LiDAR and 60-GHz phased-array measurements from 55 receiver viewpoints comprising 37,620 beam-pair power measurements across 72 controlled missing-sector cases. The results show that RF-assisted reconstruction provides larger accuracy gains as the missing-sector width increases. For the 80-degree missing-sector case investigated in this paper, RF+polar fusion is shown to reduce the mean absolute error (MAE) from 2.271 m for polar LiDAR interpolation to 0.617 m, corresponding to a 72.8% reduction. The results further show that useful RF-assisted recovery can be maintained even with fewer beam-pair measurements under limited beam training. These findings demonstrate that directional communication measurements can support environmental sensing by providing complementary geometric information for missing LiDAR regions.

0.11

LiDAR-Derived Surface Priors for Multimodal Sensing-Assisted NLoS Beam Search in Indoor 60-GHz Networks

eess.SY ·2026-08-18 ·Amod Ashtekar, Dalton Davis, Rafaela Lomboy, Omar Ibrahim, Raj Sai Sohel Bandari +1 more
similarity 0.61
Abstract

Highly directional 60-GHz Internet-of-Things (IoT) links can exploit naturally occurring indoor surfaces to sustain connectivity under blockage. Identifying viable non-line-of-sight (NLoS) paths, however, can require extensive RF beam training. This paper investigates whether LiDAR can reduce this search overhead by providing a surface-aware prior without assuming a direct mapping between optical return and mmWave reflection. The proposed framework uses LiDAR-derived geometry and return statistics to rank candidate propagation directions, while RF measurements remain responsible for final beam selection. The experimental validation is organized in three stages to separate descriptor robustness, cross-modal association, and beam-search performance. Controlled LiDAR measurements first quantify how geometric and radiometric surface descriptors vary with acquisition geometry. Matched LiDAR and 60-GHz measurements in an L-shaped corridor then determine whether these descriptors are associated with the measured surface-mediated RF response under a prescribed NLoS interaction. Finally, a separate room-scale campaign evaluates the resulting prior using exhaustive TX-RX beam maps without prescribing the underlying propagation mechanism. The measurements show that descriptor reliability depends on acquisition geometry and point-cloud representation, and that LiDAR and RF surface responses exhibit cross-modal association without supporting deterministic RF-power prediction. In the room experiment, local three-ring 3-D planarity retains a beam within 3 dB of exhaustive search at 74.5% of the measured locations while reducing RF beam-pair probing by 72% relative to exhaustive probing over the candidate search region. These results establish LiDAR-derived local surface structure as a communication-oriented prior for concentrating RF probing and reducing mmWave beam-search uncertainty.

0.20

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.57
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

6G ISAC Drone Detection: Signal Processing and Experimental Validation at FR1

eess.SP ·2026-11-03 ·Enrique T. R. Pinto, Marcus Henninger, Lucas Giroto, Markku Juntti, Silvio Mandelli
similarity 0.57
Abstract

Integrated sensing and communications (ISAC) enables mobile networks to detect passive targets such as drones at minimal additional cost. However, in ISAC, a small drone must be detected against strong ground clutter with the limited radio resources left by communications. In this paper, we propose two ISAC target detectors: a coherent detector, which combines all frames and beam dwells of a revisit, and a non-coherent detector, robust to inter-frame clock phase drift. The algorithms leverage per-dwell clutter whitening and the adaptive coherence estimator (ACE) detection statistic to improve performance. Both detectors estimate the range, radial velocity, and azimuth of targets in real time on a laptop graphics processing unit (GPU). Measurements with an FR1 ISAC proof-of-concept system based on a commercial base station show that the coherent detector outperforms the non-coherent one and recovers the full track.

0.32

Spectral-Convolutional Factorized Transformer for Joint Multipath Parameter Estimation: Applications to mmWave Positioning and Radio SLAM

eess.SP cs.AI ·2026-11-01 ·Yaya Etiabi, Wessam Ajib, Halima Elbiaze
similarity 0.57
Abstract

Future 6G wireless networks are expected to evolve toward AI-native systems that support intelligent, environment-aware services, including positioning and mapping. Current research has already integrated AI into several aspects of communication, particularly wireless channel estimation. However, most learning-based channel estimators focus on communication-oriented objectives rather than explicitly estimating multipath parameters such as delay, angle of arrival (AoA), and angle of departure (AoD). These parameters provide essential geometric information for downstream tasks including positioning and radio simultaneous localization and mapping (SLAM). In this work, we propose a Spectral-Convolutional Factorized Transformer (SCFT) for joint multipath component (MPC) estimation from noisy complex channel estimates and physical beam-pair descriptors. SCFT combines local spectral convolution, permutation-equivariant beam-set attention, and a query-based Transformer decoder to detect and classify line-of-sight and non-line-of-sight paths and estimate their observed delays, AoAs, and AoDs. Experiments on realistic ray-tracing data show that SCFT reduces the generalized optimal sub-pattern assignment error by 13.1% compared with ResNet, the strongest competing baseline. We further demonstrate this advantage in independent snapshot positioning and radio SLAM, where SCFT reduces position RMSE by 18.5% and 65.0%, respectively, relative to ResNet. These findings highlight the importance of explicitly recovering multipath geometry, as improvements in MPC estimation can translate into substantial gains in downstream tasks.

0.22

Human Mobility Sensing Using Wall-Reflected Beamformed Millimeter-Wave Communication Signals

eess.SY ·2026-11-04 ·Tony DiMichele, Raees Matheen Mullah, Christian Lopez Garcia, Zahra Najafi, Mohammed E. Eltayeb
similarity 0.55
Abstract

Existing millimeter-wave (mmWave) communication beam patterns spatially weight human-scattered signals and shape the received-power signatures induced by human motion. We exploit these beam-shaped signatures for device-free walkingpace and walk-direction classification using a wall-reflected 60.8-GHz link with closely spaced phased arrays and fixed communication beamforming vectors. Human movement alters the interference between wall-reflected and scattered signals, producing power oscillations surrounding a central blockage fade. A beam-dependent interference model provides a physical interpretation of these signatures. Using received-power statistics from a continuous-tone experiment, we extract fade duration for walking-pace classification and pre/post-fade asymmetries for walk-direction classification. Measurements comprise 144 crossings from three participants along perpendicular and diagonal trajectories. Under leave-one-participant-out validation, logistic regression achieves 86.1% binary and 79.2% three-class walking pace accuracy, and 77.1% travel-direction accuracy. The results demonstrate mobility sensing using fixed communication beams without channel estimation, Doppler processing, or dedicated radar hardware

0.27

A Tutorial on Infrastructure Self-Calibration for Radio-Based Indoor Positioning

eess.SP ·2026-11-11 ·Paul Schwarzbach
code/data similarity 0.55
Abstract

Radio positioning needs the positions of its anchors, access points, base stations, or reconfigurable intelligent surfaces, and manual surveying is costly and error-prone. Calibrating this infrastructure from its own measurements is one estimation problem, studied in at least four communities as self-calibration, auto-positioning, anchor self-localization, network localization, or radio simultaneous localization and mapping. This tutorial teaches the problem through one factor graph. The measurement topology sets its factors, the reference information enters as priors, and other measurement models add nuisance states. The tutorial shows what ranges can identify, from rigidity to the motion a mobile device must contribute, and presents multidimensional scaling, nonlinear least squares, recursive filters, and convex relaxations as inference engines over this graph. One session of a ten-anchor ultra-wideband deployment is carried through every step, and recordings from a second, harsher deployment and a public partial mesh serve as contrasts. The examples illustrate three lessons. On a full mesh, choose a robust loss and set its scale first, and calibrate with the engine of the positioning system, since the engines then reach similar errors. On thinned or partial meshes, test the result at surveyed check points, because the start decides which minimum a solver reaches. On a line-of-sight deployment, estimate range offsets, which lower the error floor that a systematic ranging bias sets and a robust loss cannot remove. A decision tree and a table of their effects turn them into deployment guidance. Code and result tables are openly released, and the data are published separately.

0.32