CS Paper Radar

A Tutorial on Infrastructure Self-Calibration for Radio-Based Indoor Positioning

Paul Schwarzbach

eess.SP ·submitted 2026-11-11 14:01 UTC · v1
code/data

Abstract

Radio positioning needs the positions of its anchors, access points, base stations, or reconfigurable intelligent surfaces, and manual surveying is costly and error-prone. Calibrating this infrastructure from its own measurements is one estimation problem, studied in at least four communities as self-calibration, auto-positioning, anchor self-localization, network localization, or radio simultaneous localization and mapping. This tutorial teaches the problem through one factor graph. The measurement topology sets its factors, the reference information enters as priors, and other measurement models add nuisance states. The tutorial shows what ranges can identify, from rigidity to the motion a mobile device must contribute, and presents multidimensional scaling, nonlinear least squares, recursive filters, and convex relaxations as inference engines over this graph. One session of a ten-anchor ultra-wideband deployment is carried through every step, and recordings from a second, harsher deployment and a public partial mesh serve as contrasts. The examples illustrate three lessons. On a full mesh, choose a robust loss and set its scale first, and calibrate with the engine of the positioning system, since the engines then reach similar errors. On thinned or partial meshes, test the result at surveyed check points, because the start decides which minimum a solver reaches. On a line-of-sight deployment, estimate range offsets, which lower the error floor that a systematic ranging bias sets and a robust loss cannot remove. A decision tree and a table of their effects turn them into deployment guidance. Code and result tables are openly released, and the data are published separately.

Closest papers

Nearest neighbours by meaning across the whole index.

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
code/data similarity 0.64
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.20

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

eess.SP cs.NI ·2026-09-10 ·Koki Kanzaki, Katsuya Suto, Koya Sato
similarity 0.64
Abstract · 16 pages, 11 figures. This work has been submitted to the IEEE for possible publication

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

0.38

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.63
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Descriptor: UWB Anchor Self-Calibration Dataset (UWB-ASC)

eess.SP ·2026-11-08 ·Paul Schwarzbach
survey similarity 0.63
Abstract

Anchor self-calibration estimates the positions of fixed nodes of an indoor radio positioning or localization system from observations among the nodes and to mobile devices. It replaces the survey of every anchor, which is costly and goes stale when anchors move. The UWB Anchor Self-Calibration Dataset (UWB-ASC) is a testing ground for such methods, recorded in one industrial hall with ultra-wideband (UWB) two-way ranging. It has three parts. The first is two measured deployments. In the line-of-sight (LOS) deployment, 10 anchors range with a walking tag tracked by motion capture. In the non-line-of-sight (NLOS) deployment, 12 nodes range among obstructions, and one of them roves over surveyed markers in 20 quasi-static sessions. Both deployments also hold static sessions, and a total station surveyed every fixed node. The second part is a seeded range simulator that draws synthetic ranges on the surveyed geometry with adjustable error components, from noise-free ranges to NLOS errors, for benchmarks at controlled error levels. Its 81 frozen draws in 5 conditions serve as the reference. The third part is a set of readers that convert the ranges among the static nodes of two public UWB datasets, TWR-CLOUD-Bern and selfloc, into the same format without redistribution. All parts share open Parquet and YAML files, in which topology views select the ranges for each class of calibration method. Raw recordings with rebuild scripts, quality reports, and field labels of the line of sight complete the dataset.

0.28

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.63
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39

ChronoChart: Setup-Agnostic Channel Charting for Label-Free Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Majid Sharghi Foroushani, Jonas Pirkl, Jonathan Ott, Maximilian Stahlke, George Yammine +2 more
published similarity 0.62
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Accurate radio-based indoor localization remains challenging in multipath-rich and dynamic indoor environments. Supervised fingerprinting methods achieve high positioning accuracy by learning mappings from radio channel measurements to physical locations, but require costly position labels and frequent recalibration. Channel Charting (CC) addresses this limitation by learning low-dimensional representations of Channel State Information (CSI) without position labels, yielding channel charts in which nearby points correspond to nearby physical locations. However, prominent CC methods rely on setup-specific dissimilarity metrics, such as ADP-, CIRA-, or PDR-based distances, and on precomputed $O(n^2)$ distance matrices, limiting scalability and transferability across radio systems. We propose ChronoChart, a timestamp-supervised CC framework that requires only CSI and timestamps without prior knowledge for training. Our method jointly optimizes complementary objectives: a triplet loss using temporally derived positive and negative samples to establish coarse global structure, a temporal-proximity loss that promotes smooth trajectories in the chart, and a joint-embedding loss that enforces consistency between representations of different augmentations. Evaluated on real-world 5G, MIMO, and passive UWB data, our method matches or exceeds prior CC baselines that depend on tailored distance metrics, and remains scalable and applicable across heterogeneous radio systems.

0.23

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.61
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Meter-Level Wi-Fi RTT Localization on a Production Enterprise WLAN

cs.NI ·2026-09-12 ·Enguang Fan, Binh Minh Tran, Klara Nahrstedt
top venue similarity 0.60
Abstract

Wi-Fi Fine Time Measurement (FTM) promises indoor localization by reusing access points (APs) already deployed for connectivity, but prior evaluations mostly use APs purpose-deployed or calibrated for ranging, leaving it unclear whether a production enterprise WLAN can provide useful localization without localization-specific infrastructure. We evaluate Wi-Fi round-trip time (RTT) localization on IllinoisNet, a live campus WLAN whose APs were placed for coverage and capacity. Using five commodity Android phones at 10 static locations across a 50 m x 30 m office floor spanning LOS, NLOS, and multipath conditions, weighted nonlinear least squares achieves a median error of 1.21 m and a 90th-percentile error of 2.68 m, with no AP replacement, repositioning, or ranging calibration. Residuals vary in magnitude and sign across APs and propagation conditions, suggesting a single global correction is insufficient and motivating AP-aware software calibration rather than new localization-specific infrastructure.

0.51