CS Paper Radar

Meter-Level Wi-Fi RTT Localization on a Production Enterprise WLAN

Enguang Fan, Binh Minh Tran, Klara Nahrstedt

cs.NI ·submitted 2026-09-12 08:12 UTC · v1
top venue

Abstract

Wi-Fi Fine Time Measurement (FTM) promises indoor localization by reusing access points (APs) already deployed for connectivity, but prior evaluations mostly use APs purpose-deployed or calibrated for ranging, leaving it unclear whether a production enterprise WLAN can provide useful localization without localization-specific infrastructure. We evaluate Wi-Fi round-trip time (RTT) localization on IllinoisNet, a live campus WLAN whose APs were placed for coverage and capacity. Using five commodity Android phones at 10 static locations across a 50 m x 30 m office floor spanning LOS, NLOS, and multipath conditions, weighted nonlinear least squares achieves a median error of 1.21 m and a 90th-percentile error of 2.68 m, with no AP replacement, repositioning, or ranging calibration. Residuals vary in magnitude and sign across APs and propagation conditions, suggesting a single global correction is insufficient and motivating AP-aware software calibration rather than new localization-specific infrastructure.

DOI
10.1145/3795866.3844758

Closest papers

Nearest neighbours by meaning across the whole index.

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.62
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Interpretable Physics Informed WiFi Indoor Localization: Learning an Effective Access Point Geometry and Using It to Prune

cs.AI cs.LG ·2026-09-26 ·Arshia Eftekhari zadeh, Rezvan Nasiri, Hadi Moradi
similarity 0.61
Abstract

Deep learning models can achieve high accuracy for indoor localization, but their black-box nature limits interpretability and the reuse of learned information. We propose a hierarchical deep learning framework for WiFi fingerprint-based indoor localization that jointly predicts user location and learns an effective geometry of the surrounding access points (APs). Physics-informed decoders infer this geometry directly from RSSI measurements and labelled user positions, without requiring the true AP coordinates during training. The learned geometry is then used to rank and prune APs. On the UJIIndoorLoc dataset, the proposed chained model achieves a mean 3D localization error of 7.07 m, reducing error by 26% to 36% compared with baseline models. Previously published methods evaluated on the same official split report errors 10.6% to 31.0% higher. Pruning 35% or 50% of the APs causes only a small loss in localization accuracy. The inferred geometry also enables Fisher-information-based AP ranking even when fingerprint databases do not contain surveyed AP coordinates. Experiments on the Tampere/TUT and UTSIndoorLoc datasets show that geometry-guided AP selection performs comparably to selectors built directly from labelled data. These results show that physics-informed interpretability can improve indoor localization while also supporting effective feature selection.

0.07

A Tutorial on Infrastructure Self-Calibration for Radio-Based Indoor Positioning

eess.SP ·2026-11-11 ·Paul Schwarzbach
code/data similarity 0.60
Abstract

Radio positioning needs the positions of its anchors, access points, base stations, or reconfigurable intelligent surfaces, and manual surveying is costly and error-prone. Calibrating this infrastructure from its own measurements is one estimation problem, studied in at least four communities as self-calibration, auto-positioning, anchor self-localization, network localization, or radio simultaneous localization and mapping. This tutorial teaches the problem through one factor graph. The measurement topology sets its factors, the reference information enters as priors, and other measurement models add nuisance states. The tutorial shows what ranges can identify, from rigidity to the motion a mobile device must contribute, and presents multidimensional scaling, nonlinear least squares, recursive filters, and convex relaxations as inference engines over this graph. One session of a ten-anchor ultra-wideband deployment is carried through every step, and recordings from a second, harsher deployment and a public partial mesh serve as contrasts. The examples illustrate three lessons. On a full mesh, choose a robust loss and set its scale first, and calibrate with the engine of the positioning system, since the engines then reach similar errors. On thinned or partial meshes, test the result at surveyed check points, because the start decides which minimum a solver reaches. On a line-of-sight deployment, estimate range offsets, which lower the error floor that a systematic ranging bias sets and a robust loss cannot remove. A decision tree and a table of their effects turn them into deployment guidance. Code and result tables are openly released, and the data are published separately.

0.32

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
code/data similarity 0.60
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.20

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.59
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.59
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.59
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

Continuous-Time Set-Transformers for Asynchronous WiFi-IMU Indoor Localization

cs.LG cs.AI ·2026-11-09 ·Mohamed Bachar, Ilyass Abouelaziz, Yuehua Ding
published similarity 0.58
Abstract

Indoor localization commonly combines WiFi received signal strength indicator (RSSI) fingerprints with inertial measurements. However, these sensor streams are sampled asynchronously at different rates; therefore, observations rarely align in time and may be missing or stale. Most existing methods resample the data onto a shared clock and process each modality using a separate branch. We instead present a continuous-time transformer that represents observations as an unordered set of timestamped tokens. Each token encodes its measurement, modality, and elapsed time since acquisition. A single attention block jointly fuses information across modalities and time, avoiding both resampling and modality-specific branches while remaining invariant to token order. During training, we randomly mask entire modalities and individual observations, enabling the model to operate under missing or outdated inputs. We validate the modality-specific encoders on their respective benchmarks and evaluate the fused model on both simulated and real datasets, including a crosssession dataset collected on unseen days. The proposed approach improves upon an open WiFi fingerprinting baseline under cross-session drift, remains competitive with learned fusion and dead-reckoning baselines, and degrades gracefully as observations become missing or stale. These results suggest that a single continuoustime transformer provides a practical framework for indoor localization from asynchronous sensors.

0.29