CS Paper Radar

ChronoChart: Setup-Agnostic Channel Charting for Label-Free Indoor Localization

Majid Sharghi Foroushani, Jonas Pirkl, Jonathan Ott, Maximilian Stahlke, George Yammine, Tobias Feigl, Christopher Mutschler

eess.SP cs.LG ·submitted 2026-10-18 11:40 UTC · v1
published

Abstract

Accurate radio-based indoor localization remains challenging in multipath-rich and dynamic indoor environments. Supervised fingerprinting methods achieve high positioning accuracy by learning mappings from radio channel measurements to physical locations, but require costly position labels and frequent recalibration. Channel Charting (CC) addresses this limitation by learning low-dimensional representations of Channel State Information (CSI) without position labels, yielding channel charts in which nearby points correspond to nearby physical locations. However, prominent CC methods rely on setup-specific dissimilarity metrics, such as ADP-, CIRA-, or PDR-based distances, and on precomputed $O(n^2)$ distance matrices, limiting scalability and transferability across radio systems. We propose ChronoChart, a timestamp-supervised CC framework that requires only CSI and timestamps without prior knowledge for training. Our method jointly optimizes complementary objectives: a triplet loss using temporally derived positive and negative samples to establish coarse global structure, a temporal-proximity loss that promotes smooth trajectories in the chart, and a joint-embedding loss that enforces consistency between representations of different augmentations. Evaluated on real-world 5G, MIMO, and passive UWB data, our method matches or exceeds prior CC baselines that depend on tailored distance metrics, and remains scalable and applicable across heterogeneous radio systems.

Comment
To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Closest papers

Nearest neighbours by meaning across the whole index.

PACC: Propagation-Aware Channel Charting with Physics-Guided Metric Learning

eess.SP ·2026-08-22 ·Binpu Shi, Ruihan Li, Min Li
similarity 0.73
Abstract

Channel charting has emerged as a promising paradigm that maps high-dimensional channel state information into a low-dimensional latent space, facilitating tasks such as radio environment sensing and beam management. However, existing methods often rely on precise user locations or timestamp-based pseudo-labels, which are difficult to obtain in privacy-sensitive scenarios and rapidly varying wireless environments. To address these limitations, we propose propagation-aware channel charting with physics-guided metric learning (PACC), a location-free framework that constructs channel-domain supervision from propagation characteristics without requiring explicit geographic information. Specifically, PACC designs a propagation-aware dissimilarity metric that adapts to line-of-sight and non-line-of-sight propagation conditions, thereby preserving both local neighborhood relationships and the intrinsic geometry of the radio environment. Simulation results demonstrate that PACC consistently outperforms both classical dimensionality-reduction methods and state-of-the-art learning-based channel-charting approaches under diverse propagation conditions.

0.28

Masked Latent Prediction of CSI for Indoor Localization in Integrated Sensing and Communication Systems

eess.SP ·2026-09-08 ·Ibtissam Labriji, Mahdi Maleki, Pavan Koteshwar Srinath
similarity 0.68
Abstract · Submitted to IEEE ISAC 2026. 4 figures

Channel State Information (CSI)-based fingerprinting can enable accurate indoor localization but suffers from domain shift, limited labeled data, and degraded performance in multipath-rich environments. To address these challenges, we propose a self-supervised localization framework built on a Joint Embedding Predictive Architecture (JEPA). Each CSI time snapshot is treated as a token, and the encoder is pre-trained by predicting the latent embeddings of masked snapshots from the visible ones, learning robust channel representations without any labels. The encoder is then frozen, and only a lightweight regression head is trained on a small set of labeled positions to estimate the user location. We evaluate the framework on the measured DICHASUS-005x dataset, a single-antenna transmitter received by a 32-antenna array in a multipath-rich indoor environment. With a 50% masking ratio, the proposed method reduces the mean localization error from 0.90 m to 0.42 m (a 53% reduction, or 0.48 m) relative to a supervised Convolutional Neural Network (CNN) baseline trained on raw CSI. Owing to its label-efficient, frozen-encoder design, the framework aligns with integrated sensing and communication (ISAC) objectives, enabling reliable sensing with minimal labeling and compute overhead.

0.13

Collaborative In-Context Learning for Indoor Radio Map Estimation

cs.LG cs.AI ·2026-10-21 ·Yuanzhe Peng, Jie Xu
publishedbenchmarkhot direction similarity 0.65
Abstract · Accepted as a regular paper at the 2026 IEEE International Conference on Big Data (IEEE BigData 2026)

Indoor radio map estimation (RME) is essential for wireless applications such as coverage planning, localization, and network deployment. However, most existing methods follow a supervised learning paradigm that requires costly labeled data and task-specific model training. Moreover, indoor environments involve privacy-sensitive information, such as building layouts and structures, that often cannot be centralized. To address these challenges, we make the first attempt to formulate indoor RME as a collaborative in-context learning (ICL) problem. We propose Poly-Ripple, a framework in which multiple clients perform ICL using large autoregressive vision models (LAVMs) without model updates. Each client is prompted by its private demonstrations and predicts the radio map for the same scene query. To capture the causal structure of wireless propagation outward from the transmitter (Tx), we adopt ripple-ordered autoregressive modeling. We further introduce importance-aware aggregation to exploit heterogeneous contextual knowledge distributed across clients under the context length constraint. We provide theoretical analysis and conduct extensive experiments on a public indoor RME benchmark. The experimental results show that Poly-Ripple consistently outperforms representative ICL baselines, while aligning with our theoretical analysis.

0.41

Interpretable Physics Informed WiFi Indoor Localization: Learning an Effective Access Point Geometry and Using It to Prune

cs.AI cs.LG ·2026-09-26 ·Arshia Eftekhari zadeh, Rezvan Nasiri, Hadi Moradi
similarity 0.64
Abstract

Deep learning models can achieve high accuracy for indoor localization, but their black-box nature limits interpretability and the reuse of learned information. We propose a hierarchical deep learning framework for WiFi fingerprint-based indoor localization that jointly predicts user location and learns an effective geometry of the surrounding access points (APs). Physics-informed decoders infer this geometry directly from RSSI measurements and labelled user positions, without requiring the true AP coordinates during training. The learned geometry is then used to rank and prune APs. On the UJIIndoorLoc dataset, the proposed chained model achieves a mean 3D localization error of 7.07 m, reducing error by 26% to 36% compared with baseline models. Previously published methods evaluated on the same official split report errors 10.6% to 31.0% higher. Pruning 35% or 50% of the APs causes only a small loss in localization accuracy. The inferred geometry also enables Fisher-information-based AP ranking even when fingerprint databases do not contain surveyed AP coordinates. Experiments on the Tampere/TUT and UTSIndoorLoc datasets show that geometry-guided AP selection performs comparably to selectors built directly from labelled data. These results show that physics-informed interpretability can improve indoor localization while also supporting effective feature selection.

0.07

Foundation Models for Wireless Localization: Pretraining, Adaptation, and Utilization

eess.SP ·2026-08-31 ·Guangjin Pan, Jiajia Guo, Zheng Xing, Hui Chen, Chao-Kai Wen +2 more
similarity 0.64
Abstract · 4 pages, 1 table. This work has been submitted to the IEEE for possible publication

Accurate wireless localization is a key enabler for 6G networks, yet remains challenging under diverse and rapidly changing propagation conditions. Model-based methods degrade when multipath channels are non-resolvable and model mismatches occur, while supervised deep learning demands large labeled datasets and generalizes poorly to new deployments. Inspired by foundation models (FMs) in language and vision, this article presents a unified framework for FM-based wireless localization that learns transferable channel representations from large-scale unlabeled channel state information and adapts to new environments with minimal or even no supervision. We review the fundamentals of FMs, compare the FM paradigm with existing localization approaches, and introduce a three-stage framework spanning large-scale pretraining, localization-oriented fine-tuning, and context-augmented inference, together with the location-aware applications it enables. Ray-tracing-based case studies show improved positioning accuracy and cross-environment generalization. Finally, we present an outlook on key research directions toward AI-native networks for wireless localization.

0.21

Supervised Device Charting with CSI Measurements from Commercial 5G NR User Equipments

eess.SP cs.IT ·2026-09-21 ·Mischa Vasylyev, Frederik Zumegen, Reinhard Wiesmayr, Christoph Studer
similarity 0.64
Abstract · This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

Radio frequency fingerprint identification (RFFI) is a promising approach to distinguish physical wireless devices using hardware-induced signal imperfections. Conventional RFFI methods only provide discrete device labels and no human-interpretable representation of the relations among received signals. We propose supervised device charting, which maps location-insensitive channel-state information (CSI) fingerprints to a low-dimensional chart that visualizes cluster compactness, overlap, and outliers. We evaluate the method with real-world 5G New Radio (5G NR) measurements from six commercial smartphones and introduce the neighbor label error rate (NLER) to quantify class-separation accuracy. Our results demonstrate that two- and three-dimensional device charts provide an interpretable visualization of the learned RFFI representation. For three-dimensional device charts, the NLER is 0.22% for same-day measurements and 7.38% for measurements from the next day. The device charts reveal a cross-day distribution shift and map the held-out device close to the known device of the same model. Increasing the device chart dimensions further improves cluster separation at the expense of interpretability.

0.21

Integrated Sensing and Communication via Channel Knowledge Maps Built from Beam Feedback Coefficients

eess.SP ·2026-10-29 ·Chongda Huang, Yue Xiao, Gang Wu, Vladimir Poulkov, Xianfu Lei +1 more
similarity 0.63
Abstract

Channel knowledge maps (CKMs) support wireless localization by linking channel features to user locations. Detailed channel fingerprints, however, can require substantial storage. This paper proposes a CKM-based localization framework that uses beam feedback coefficients collected during communication. These coefficients serve as compact location fingerprints within the beam management process, without requiring full channel feedback or additional sensing measurements. Using a coarse position prior, the base station searches nearby CKM entries and refines the location estimate through local interpolation. We analyze the relationship between spatial fingerprint variation and localization accuracy, and evaluate the effect of feedback quantization. Simulations show favorable storage--accuracy trade-offs relative to dense and sparsified spectral fingerprinting in the tested multipath environments.

0.33

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.63
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13