CS Paper Radar

Supervised Device Charting with CSI Measurements from Commercial 5G NR User Equipments

Mischa Vasylyev, Frederik Zumegen, Reinhard Wiesmayr, Christoph Studer

eess.SP cs.IT ·submitted 2026-09-21 07:31 UTC · v1

Abstract

Radio frequency fingerprint identification (RFFI) is a promising approach to distinguish physical wireless devices using hardware-induced signal imperfections. Conventional RFFI methods only provide discrete device labels and no human-interpretable representation of the relations among received signals. We propose supervised device charting, which maps location-insensitive channel-state information (CSI) fingerprints to a low-dimensional chart that visualizes cluster compactness, overlap, and outliers. We evaluate the method with real-world 5G New Radio (5G NR) measurements from six commercial smartphones and introduce the neighbor label error rate (NLER) to quantify class-separation accuracy. Our results demonstrate that two- and three-dimensional device charts provide an interpretable visualization of the learned RFFI representation. For three-dimensional device charts, the NLER is 0.22% for same-day measurements and 7.38% for measurements from the next day. The device charts reveal a cross-day distribution shift and map the held-out device close to the known device of the same model. Increasing the device chart dimensions further improves cluster separation at the expense of interpretability.

Comment
This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

Closest papers

Nearest neighbours by meaning across the whole index.

ChronoChart: Setup-Agnostic Channel Charting for Label-Free Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Majid Sharghi Foroushani, Jonas Pirkl, Jonathan Ott, Maximilian Stahlke, George Yammine +2 more
published similarity 0.64
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Accurate radio-based indoor localization remains challenging in multipath-rich and dynamic indoor environments. Supervised fingerprinting methods achieve high positioning accuracy by learning mappings from radio channel measurements to physical locations, but require costly position labels and frequent recalibration. Channel Charting (CC) addresses this limitation by learning low-dimensional representations of Channel State Information (CSI) without position labels, yielding channel charts in which nearby points correspond to nearby physical locations. However, prominent CC methods rely on setup-specific dissimilarity metrics, such as ADP-, CIRA-, or PDR-based distances, and on precomputed $O(n^2)$ distance matrices, limiting scalability and transferability across radio systems. We propose ChronoChart, a timestamp-supervised CC framework that requires only CSI and timestamps without prior knowledge for training. Our method jointly optimizes complementary objectives: a triplet loss using temporally derived positive and negative samples to establish coarse global structure, a temporal-proximity loss that promotes smooth trajectories in the chart, and a joint-embedding loss that enforces consistency between representations of different augmentations. Evaluated on real-world 5G, MIMO, and passive UWB data, our method matches or exceeds prior CC baselines that depend on tailored distance metrics, and remains scalable and applicable across heterogeneous radio systems.

0.23

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.62
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

Calibrated RF-Fingerprinting Under Interference With Heterogeneous Transmission Protocols

cs.LG ·2026-09-17 ·Tariq Abdul-Quddoos, Xiangfang Li, Lijun Qian
publishedtheory similarity 0.62
Abstract

Radio Frequency(RF)-Fingerprinting is a spectrum monitoring technique that identifies specific transmitters based on hardware impairments imprinted within the emitted signal. Although widely researched, studies almost exclusively consider scenarios where only one transmitter is emitting at a time, limiting real world applicability. In this work, we further the study of RF-Fingerprinting by considering co-channel interference, with multiple emitted signals interfering with each other, overlapping in time and frequency. Specifically, we formulate this problem as a multi-label classification problem and employ a 1D convolutional neural network (CNN). Furthermore, the models are calibrated such that the confidence thresholds for the label probabilities are derived, with guarantees on the upper bound on the average number of False Negatives, providing a degree of confidence in not missing a true spectrum policy violation. The proposed method is validated using real world data from the POWDER 5G testbed on devices transmitting 802.11a(Wi-Fi), 4G LTE, and 5G NR waveforms. The results show accuracy as high as 97% and as low as 73% after calibration depending on channel conditions. Also calibrating for various average false negatives upper bounds achieves micro recall scores of approximately (1 - calibrated false negatives) with the calibration robust to out-of-distribution interference, demonstrating the potential of the proposed method in a realistic high contention wireless environment

0.38

Entropy-Based Wireless Technology Recognition

eess.SP ·2026-10-16 ·Mohammad Alhellani, Eli De Poorter, Mamoun Guenach, Adnan Shahid
similarity 0.60
Abstract

Wireless Technology Recognition (WTR) enables identifying wireless technologies from received radio signals and is important for spectrum monitoring and management systems. Existing approaches either rely on handcrafted signal features with limited robustness or computationally intensive Deep Learning (DL) models operating on high-dimensional In-phase and Quadrature (IQ) samples or spectrograms. In this paper, we investigate a different hypothesis: wireless technologies can be distinguished through the temporal evolution of their local time-frequency complexity. To capture this behavior, we propose a lightweight WTR framework based on two-dimensional dispersion entropy. Entropy values are extracted from successive spectrogram regions to characterize the evolution of local spectrogram complexity throughout a transmission and summarized into a compact feature representation for classification using a Multilayer Perceptron (MLP). The framework is evaluated on seven wireless technologies, namely IEEE 802.11ah, IEEE 802.15.4 SUN-FSK, IEEE 802.15.4 SUN-OFDM, LoRa, IEEE 802.11n, LTE, and 5G NR, at Signal-to-Noise Ratios (SNRs) ranging from -20 dB to 40 dB. Experimental results show that the proposed approach consistently outperforms IQ-based and Short-Time Fourier Transform (STFT)-based Convolutional Neural Network (CNN) baselines, particularly at low and moderate SNRs. Averaged across all evaluated SNR levels, it achieves 82.73% accuracy, corresponding to improvements of 23.8% and 14.6% over the IQ-based and STFT-based CNN approaches, respectively. Furthermore, the approach maintains its recognition advantage with data-augmented training while requiring substantially shorter training times. The results demonstrate that temporal evolution of local spectrogram complexity provides a robust technology-specific fingerprint and an effective, computationally efficient representation for WTR.

0.21

C$^2$T-OpenMax: A Novel Open-Set WiFi RF Fingerprinting Method via Center Constrained Learning and Confidence-Guided Tail Modeling

cs.CR ·2026-09-02 ·Yuanyu Zhang, Junjie Yang, Ji He, Shuangrui Zhao, Lele Zheng +1 more
similarity 0.59
Abstract

Radio frequency fingerprinting (RFF) enables device authentication from transmitter-specific hardware imperfections, but practical deployment requires cross-environment open-set recognition. Data augmentation improves environmental generalization, yet may yield dispersed, low-confidence known-class representations that distort the class statistics used by OpenMax. To address this problem, we propose C$^2$T-OpenMax, an enhanced OpenMax framework combining center-constrained learning with confidence-guided tail modeling. The former improves intra-class compactness, making class-wise representations more suitable for distance-based modeling. The latter retains only correctly classified, high-confidence logits for mean activation vector estimation and Weibull fitting, reducing bias from ambiguous boundary samples. Together, the two modules refine representation geometry and OpenMax construction while preserving augmentation benefits. Experiments on a public WiFi CSI dataset show that C$^2$T-OpenMax achieves the highest open-set accuracy in seven of eight location groups and outperforms all baselines in area under the receiver operating characteristic curve (AUROC) and open-set classification rate (OSCR) across every tested openness level. Under the largest-openness setting, it improves accuracy by 12.31%, AUROC by 0.0887, and OSCR by 0.0856 over the augmented OpenMax baseline.

0.26

SFPF: Spatio-Frequency Polarization Fingerprint for Anomalous Wireless Device Detection

cs.CR ·2026-09-18 ·Xiaoxuan Huang, Jinlong Xu, Daoyuan Shen, Meng Zhang, Dong Wei
similarity 0.57
Abstract

Periodic inspection of deployed wireless devices is necessary because unauthorized hardware replacement may preserve communication functions, credentials, and logical identity, making anomalous devices difficult to detect. Such inspections are conducted under controlled measurement conditions to verify that each device remains consistent with its enrolled hardware state. Conventional radio-frequency fingerprint (RFF) may provide insufficient separation when replacement hardware closely resembles legitimate hardware, while a polarization fingerprint (PF) constructed at one observation direction may miss spatially nonuniform polarization changes. This paper proposes the spatio-frequency polarization fingerprint (SFPF), which jointly represents complex polarization responses over multiple frequencies and observation directions; conventional PF is its fixed-direction slice. We derive SFPF formation from hardware-dependent modal excitation, directional far-field radiation, and polarization projection. A first-order sensitivity analysis shows that the response to the same hardware change varies with both frequency and direction, motivating joint spatio-frequency acquisition. Electromagnetic simulations confirm the nonuniform spatio-frequency sensitivity and show that, under the same observation budget, SFPF improves normalized distance, Fisher score, and the inter-/intra-class ratio over PF by 17.7%, 45.8%, and 11.3%, respectively. Experiments show that SFPF consistently outperforms RFF and PF over 0--20~dB. At 15--20~dB, SFPF achieves anomalous-device F1 scores of 87.3--90.4% and AUROC values of 85.4--95.5%.

0.29

PACC: Propagation-Aware Channel Charting with Physics-Guided Metric Learning

eess.SP ·2026-08-22 ·Binpu Shi, Ruihan Li, Min Li
similarity 0.56
Abstract

Channel charting has emerged as a promising paradigm that maps high-dimensional channel state information into a low-dimensional latent space, facilitating tasks such as radio environment sensing and beam management. However, existing methods often rely on precise user locations or timestamp-based pseudo-labels, which are difficult to obtain in privacy-sensitive scenarios and rapidly varying wireless environments. To address these limitations, we propose propagation-aware channel charting with physics-guided metric learning (PACC), a location-free framework that constructs channel-domain supervision from propagation characteristics without requiring explicit geographic information. Specifically, PACC designs a propagation-aware dissimilarity metric that adapts to line-of-sight and non-line-of-sight propagation conditions, thereby preserving both local neighborhood relationships and the intrinsic geometry of the radio environment. Simulation results demonstrate that PACC consistently outperforms both classical dimensionality-reduction methods and state-of-the-art learning-based channel-charting approaches under diverse propagation conditions.

0.28

Masked Latent Prediction of CSI for Indoor Localization in Integrated Sensing and Communication Systems

eess.SP ·2026-09-08 ·Ibtissam Labriji, Mahdi Maleki, Pavan Koteshwar Srinath
similarity 0.56
Abstract · Submitted to IEEE ISAC 2026. 4 figures

Channel State Information (CSI)-based fingerprinting can enable accurate indoor localization but suffers from domain shift, limited labeled data, and degraded performance in multipath-rich environments. To address these challenges, we propose a self-supervised localization framework built on a Joint Embedding Predictive Architecture (JEPA). Each CSI time snapshot is treated as a token, and the encoder is pre-trained by predicting the latent embeddings of masked snapshots from the visible ones, learning robust channel representations without any labels. The encoder is then frozen, and only a lightweight regression head is trained on a small set of labeled positions to estimate the user location. We evaluate the framework on the measured DICHASUS-005x dataset, a single-antenna transmitter received by a 32-antenna array in a multipath-rich indoor environment. With a 50% masking ratio, the proposed method reduces the mean localization error from 0.90 m to 0.42 m (a 53% reduction, or 0.48 m) relative to a supervised Convolutional Neural Network (CNN) baseline trained on raw CSI. Owing to its label-efficient, frozen-encoder design, the framework aligns with integrated sensing and communication (ISAC) objectives, enabling reliable sensing with minimal labeling and compute overhead.

0.13