CS Paper Radar

Calibrated RF-Fingerprinting Under Interference With Heterogeneous Transmission Protocols

Tariq Abdul-Quddoos, Xiangfang Li, Lijun Qian

cs.LG ·submitted 2026-09-17 17:44 UTC · v1
publishedtheory

Abstract

Radio Frequency(RF)-Fingerprinting is a spectrum monitoring technique that identifies specific transmitters based on hardware impairments imprinted within the emitted signal. Although widely researched, studies almost exclusively consider scenarios where only one transmitter is emitting at a time, limiting real world applicability. In this work, we further the study of RF-Fingerprinting by considering co-channel interference, with multiple emitted signals interfering with each other, overlapping in time and frequency. Specifically, we formulate this problem as a multi-label classification problem and employ a 1D convolutional neural network (CNN). Furthermore, the models are calibrated such that the confidence thresholds for the label probabilities are derived, with guarantees on the upper bound on the average number of False Negatives, providing a degree of confidence in not missing a true spectrum policy violation. The proposed method is validated using real world data from the POWDER 5G testbed on devices transmitting 802.11a(Wi-Fi), 4G LTE, and 5G NR waveforms. The results show accuracy as high as 97% and as low as 73% after calibration depending on channel conditions. Also calibrating for various average false negatives upper bounds achieves micro recall scores of approximately (1 - calibrated false negatives) with the calibration robust to out-of-distribution interference, demonstrating the potential of the proposed method in a realistic high contention wireless environment

Closest papers

Nearest neighbours by meaning across the whole index.

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.63
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

RF Fingerprinting of DSP Implementations using Machine Learning: An Over-the-Air Case Study

eess.SP cs.LG ·2026-10-11 ·Stefan Scholl
similarity 0.63
Abstract

Radio frequency fingerprinting aims to identify transmitters by exploiting small differences in the emitted signal waveform. Common approaches exploit hardware-dependent imperfections for that purpose. This work instead investigates whether differences between digital signal processing implementations of a transmitter can be identified from their radiated signals. As a practical case study, five different software-based DSP implementations for generating a 2-FSK RTTY communication waveform are considered. In a monitoring receiver, a classifier can identify these DSP implementations using convolutional neural networks that are trained on augmented software-generated signals represented as raw IQ, power spectrum or instantaneous frequency. The trained networks are evaluated on over-the-air recordings obtained using a shortwave transceiver and a software-defined radio receiver. The best neural network combines IQ and the power spectrum representation and achieves an accuracy of up to 90%. The study further examines the influence of the signal SNR and the observation bandwidth on the classification accuracy. The results demonstrate that DSP implementations leave distinguishable characteristics in the transmitted signals and suggest that DSP-dependent fingerprinting can provide complementary information for specific emitter identification systems.

0.22

Supervised Device Charting with CSI Measurements from Commercial 5G NR User Equipments

eess.SP cs.IT ·2026-09-21 ·Mischa Vasylyev, Frederik Zumegen, Reinhard Wiesmayr, Christoph Studer
similarity 0.62
Abstract · This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

Radio frequency fingerprint identification (RFFI) is a promising approach to distinguish physical wireless devices using hardware-induced signal imperfections. Conventional RFFI methods only provide discrete device labels and no human-interpretable representation of the relations among received signals. We propose supervised device charting, which maps location-insensitive channel-state information (CSI) fingerprints to a low-dimensional chart that visualizes cluster compactness, overlap, and outliers. We evaluate the method with real-world 5G New Radio (5G NR) measurements from six commercial smartphones and introduce the neighbor label error rate (NLER) to quantify class-separation accuracy. Our results demonstrate that two- and three-dimensional device charts provide an interpretable visualization of the learned RFFI representation. For three-dimensional device charts, the NLER is 0.22% for same-day measurements and 7.38% for measurements from the next day. The device charts reveal a cross-day distribution shift and map the held-out device close to the known device of the same model. Increasing the device chart dimensions further improves cluster separation at the expense of interpretability.

0.21

Interpretable Feature Learning for RF Fingerprinting via Polar MKANs

eess.SP cs.LG ·2026-08-20 ·Mikhail Krasnov, Ljupcho Milosheski, Carolina Fortuna
benchmark similarity 0.59
Abstract · 5 pages, 5 figures, 3 tables

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

0.36

Entropy-Based Wireless Technology Recognition

eess.SP ·2026-10-16 ·Mohammad Alhellani, Eli De Poorter, Mamoun Guenach, Adnan Shahid
similarity 0.58
Abstract

Wireless Technology Recognition (WTR) enables identifying wireless technologies from received radio signals and is important for spectrum monitoring and management systems. Existing approaches either rely on handcrafted signal features with limited robustness or computationally intensive Deep Learning (DL) models operating on high-dimensional In-phase and Quadrature (IQ) samples or spectrograms. In this paper, we investigate a different hypothesis: wireless technologies can be distinguished through the temporal evolution of their local time-frequency complexity. To capture this behavior, we propose a lightweight WTR framework based on two-dimensional dispersion entropy. Entropy values are extracted from successive spectrogram regions to characterize the evolution of local spectrogram complexity throughout a transmission and summarized into a compact feature representation for classification using a Multilayer Perceptron (MLP). The framework is evaluated on seven wireless technologies, namely IEEE 802.11ah, IEEE 802.15.4 SUN-FSK, IEEE 802.15.4 SUN-OFDM, LoRa, IEEE 802.11n, LTE, and 5G NR, at Signal-to-Noise Ratios (SNRs) ranging from -20 dB to 40 dB. Experimental results show that the proposed approach consistently outperforms IQ-based and Short-Time Fourier Transform (STFT)-based Convolutional Neural Network (CNN) baselines, particularly at low and moderate SNRs. Averaged across all evaluated SNR levels, it achieves 82.73% accuracy, corresponding to improvements of 23.8% and 14.6% over the IQ-based and STFT-based CNN approaches, respectively. Furthermore, the approach maintains its recognition advantage with data-augmented training while requiring substantially shorter training times. The results demonstrate that temporal evolution of local spectrogram complexity provides a robust technology-specific fingerprint and an effective, computationally efficient representation for WTR.

0.21

IriSig-Spoof: A Real-World Benchmark for Time-Robust Satellite RF Fingerprinting and Spoofing Detection

cs.CR ·2026-08-19 ·Shichang Guo, Yuanyu Zhang, Shuangrui Zhao, Ji He, Pinchang Zhang +1 more
benchmarkdataset similarity 0.58
Abstract

Low Earth orbit (LEO) satellite Internet is becoming critical communications infrastructure, yet its open wireless links remain vulnerable to satellite impersonation and signal spoofing. Radio frequency fingerprinting (RFF) offers a potential defense by exploiting transmitter-specific hardware imperfections manifested in received signals. However, the reliability of existing satellite RFF methods remains difficult to assess because no unified dataset and benchmark support temporal, open-set, and cross-scenario evaluation. To address this gap, we introduce IriSig-Spoof, a real-world Iridium dataset comprising 5.17 million messages collected from 66 satellites over 32 days, together with software-defined radio (SDR)-generated spoofing signals from indoor and outdoor settings. We further establish three benchmark tasks: temporal robustness evaluation, open-set RFF identification with unknown-signal rejection, and cross-scenario spoofing detection. Experiments using a multi-scale attention convolutional neural network (MACNN) show that temporal robustness varies across configurations, with the best configuration achieving 97.75% average cross-day accuracy. In open-set evaluation, MACNN achieves an area under the receiver operating characteristic curve (AUROC) of 0.9715, while showing that effective unknown-signal rejection does not necessarily ensure reliable identity assignment. Cross-scenario experiments reveal differences at low false-positive rates. IriSig-Spoof provides a reproducible basis for evaluating robust RFF methods under temporal variation and changing attack conditions.

0.40

Toward Interference-Agnostic RF Source Separation

cs.AI eess.SP ·2026-11-13 ·Maxence Albert, Raphaël Duroselle, Thibaud Ehret, Olivier Boeffard, Jean-François Bonastre
similarity 0.58
Abstract · 5 pages, 3 figures, 1 tabs. Submitted to ICASSP2027

Separating a radio-frequency signal of interest from a co-channel interference is mostly addressed with specialized separators, each trained for one pair of signal and interference types and therefore relying on a label that a heavily jammed receiver cannot identify. We show that this reliance is not benign: applied to an interference it was not trained on, such a separator usually fails to recover the signal, and in most of the cases we measure it leaves the signal worse than no processing at all. We then train a single separator over every pair, giving it no indication at test time of which one it faces, on two architectures with no component in common: the convolutional WaveNet of the ICASSP 2024 RF Challenge, and a band-split transformer that we adapt from music source separation. Both behave the same way. At the size of one specialized model, the unified separator stays close to the whole models it replaces, keeping the bit error rate close on almost every pair, better on one and worse on another. On an interference absent from every training set, it does as well as the best specialized model, without anyone having to choose which one to deploy.

0.24

C$^2$T-OpenMax: A Novel Open-Set WiFi RF Fingerprinting Method via Center Constrained Learning and Confidence-Guided Tail Modeling

cs.CR ·2026-09-02 ·Yuanyu Zhang, Junjie Yang, Ji He, Shuangrui Zhao, Lele Zheng +1 more
similarity 0.57
Abstract

Radio frequency fingerprinting (RFF) enables device authentication from transmitter-specific hardware imperfections, but practical deployment requires cross-environment open-set recognition. Data augmentation improves environmental generalization, yet may yield dispersed, low-confidence known-class representations that distort the class statistics used by OpenMax. To address this problem, we propose C$^2$T-OpenMax, an enhanced OpenMax framework combining center-constrained learning with confidence-guided tail modeling. The former improves intra-class compactness, making class-wise representations more suitable for distance-based modeling. The latter retains only correctly classified, high-confidence logits for mean activation vector estimation and Weibull fitting, reducing bias from ambiguous boundary samples. Together, the two modules refine representation geometry and OpenMax construction while preserving augmentation benefits. Experiments on a public WiFi CSI dataset show that C$^2$T-OpenMax achieves the highest open-set accuracy in seven of eight location groups and outperforms all baselines in area under the receiver operating characteristic curve (AUROC) and open-set classification rate (OSCR) across every tested openness level. Under the largest-openness setting, it improves accuracy by 12.31%, AUROC by 0.0887, and OSCR by 0.0856 over the augmented OpenMax baseline.

0.26