CS Paper Radar

RF Fingerprinting of DSP Implementations using Machine Learning: An Over-the-Air Case Study

Stefan Scholl

eess.SP cs.LG ·submitted 2026-10-11 09:47 UTC · v1

Abstract

Radio frequency fingerprinting aims to identify transmitters by exploiting small differences in the emitted signal waveform. Common approaches exploit hardware-dependent imperfections for that purpose. This work instead investigates whether differences between digital signal processing implementations of a transmitter can be identified from their radiated signals. As a practical case study, five different software-based DSP implementations for generating a 2-FSK RTTY communication waveform are considered. In a monitoring receiver, a classifier can identify these DSP implementations using convolutional neural networks that are trained on augmented software-generated signals represented as raw IQ, power spectrum or instantaneous frequency. The trained networks are evaluated on over-the-air recordings obtained using a shortwave transceiver and a software-defined radio receiver. The best neural network combines IQ and the power spectrum representation and achieves an accuracy of up to 90%. The study further examines the influence of the signal SNR and the observation bandwidth on the classification accuracy. The results demonstrate that DSP implementations leave distinguishable characteristics in the transmitted signals and suggest that DSP-dependent fingerprinting can provide complementary information for specific emitter identification systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Calibrated RF-Fingerprinting Under Interference With Heterogeneous Transmission Protocols

cs.LG ·2026-09-17 ·Tariq Abdul-Quddoos, Xiangfang Li, Lijun Qian
publishedtheory similarity 0.63
Abstract

Radio Frequency(RF)-Fingerprinting is a spectrum monitoring technique that identifies specific transmitters based on hardware impairments imprinted within the emitted signal. Although widely researched, studies almost exclusively consider scenarios where only one transmitter is emitting at a time, limiting real world applicability. In this work, we further the study of RF-Fingerprinting by considering co-channel interference, with multiple emitted signals interfering with each other, overlapping in time and frequency. Specifically, we formulate this problem as a multi-label classification problem and employ a 1D convolutional neural network (CNN). Furthermore, the models are calibrated such that the confidence thresholds for the label probabilities are derived, with guarantees on the upper bound on the average number of False Negatives, providing a degree of confidence in not missing a true spectrum policy violation. The proposed method is validated using real world data from the POWDER 5G testbed on devices transmitting 802.11a(Wi-Fi), 4G LTE, and 5G NR waveforms. The results show accuracy as high as 97% and as low as 73% after calibration depending on channel conditions. Also calibrating for various average false negatives upper bounds achieves micro recall scores of approximately (1 - calibrated false negatives) with the calibration robust to out-of-distribution interference, demonstrating the potential of the proposed method in a realistic high contention wireless environment

0.38

BladeSEI: A Multi-Channel and Multi-Day Dataset for Robust Specific Emitter Identification of Radars

eess.SP ·2026-11-13 ·Ryan White, Robert Jones, Hassan Habib, Matthew A. Ritchie, Victoria Nockles +1 more
similarity 0.62
Abstract · 7 pages, 8 figures

This paper introduces "BladeSEI", a multi-channel receiver, multi-day dataset of radar pulses recorded over-the-air from 12 Software Defined Radios (SDRs) for the purpose of Specific Emitter Identification (SEI). The aim of this dataset is to enable investigation into robust SEI techniques that are able to generalise across different receiver channels and recording sessions. The dataset consists of two waveform types per emitter, a 50 microsecond chirped pulse of 40 MHz bandwidth and a 10 microsecond unmodulated pulse. Pulses are captured simultaneously on four synchronised analogue-to-digital converter (ADC) channels of a multi-channel receiver over three recording sessions on two days: a baseline session, an identical repeat on the following day, and a session in which the emitters were thermally conditioned to alter their operating temperature. Initial results using Principal Component Analysis (PCA), Inception and ResNet based classifiers, trained and tested on a single ADC channel and recording session, show that the BladeRF emitters can be discriminated at high signal-to-noise ratio (SNR), with ResNet achieving a macro-F1 above 0.98 at 25 dB for both waveforms, and performance degrading towards random guessing at 0 dB.

0.31

Entropy-Based Wireless Technology Recognition

eess.SP ·2026-10-16 ·Mohammad Alhellani, Eli De Poorter, Mamoun Guenach, Adnan Shahid
similarity 0.59
Abstract

Wireless Technology Recognition (WTR) enables identifying wireless technologies from received radio signals and is important for spectrum monitoring and management systems. Existing approaches either rely on handcrafted signal features with limited robustness or computationally intensive Deep Learning (DL) models operating on high-dimensional In-phase and Quadrature (IQ) samples or spectrograms. In this paper, we investigate a different hypothesis: wireless technologies can be distinguished through the temporal evolution of their local time-frequency complexity. To capture this behavior, we propose a lightweight WTR framework based on two-dimensional dispersion entropy. Entropy values are extracted from successive spectrogram regions to characterize the evolution of local spectrogram complexity throughout a transmission and summarized into a compact feature representation for classification using a Multilayer Perceptron (MLP). The framework is evaluated on seven wireless technologies, namely IEEE 802.11ah, IEEE 802.15.4 SUN-FSK, IEEE 802.15.4 SUN-OFDM, LoRa, IEEE 802.11n, LTE, and 5G NR, at Signal-to-Noise Ratios (SNRs) ranging from -20 dB to 40 dB. Experimental results show that the proposed approach consistently outperforms IQ-based and Short-Time Fourier Transform (STFT)-based Convolutional Neural Network (CNN) baselines, particularly at low and moderate SNRs. Averaged across all evaluated SNR levels, it achieves 82.73% accuracy, corresponding to improvements of 23.8% and 14.6% over the IQ-based and STFT-based CNN approaches, respectively. Furthermore, the approach maintains its recognition advantage with data-augmented training while requiring substantially shorter training times. The results demonstrate that temporal evolution of local spectrogram complexity provides a robust technology-specific fingerprint and an effective, computationally efficient representation for WTR.

0.21

SVM + CFAR + OR: A Hybrid Machine-Learning-CFAR Receiver for Low-False-Alarm PRACH Preamble Detection in 5G NR and Beyond

eess.SP ·2026-11-05 ·Filip Ferenc, Michal Szczachor
similarity 0.57
Abstract · 12 page, 10 figures

The physical random access channel (PRACH) enables initial access between user equipment and the base station, making reliable preamble detection essential for cellular networks. Growing device density in 5G and beyond-5G networks, massive machine-type communication, and the shift towards machine-learning-driven radio interfaces challenge conventional analytical detectors, particularly in complex radio environments and at low signal-to-noise ratios. This article formulates preamble detection as a 64-class classification problem and introduces two model-agnostic contributions: a robust adaptive threshold implementing the constant false alarm rate (CFAR) principle in the classifier decision-score domain (MAD-CFAR), and a hybrid receiver combining a learned detector with a conventional power-delay-profile CFAR detector through a logical OR rule. The learned branch is evaluated using two models trained on the same GPU-generated dataset: a support vector machine (SVM) with principal component analysis and a lightweight one-dimensional convolutional neural network (CNN). On a held-out test set, the SVM achieves 98.58% accuracy (macro-AUC 0.9991), while the CNN reaches 99.29% accuracy (macro-AUC 1.0000) at lower inference cost and memory footprint. MAD-CFAR reduces the learned branch's false alarm rate to near zero on the noise calibration campaign. The OR hybrid retains the analytical detector's low, standard-compliant false alarm rate while extending detection capability. Across six propagation channels and 258 conformance-style tests, the SVM-based hybrid improves low-SNR sensitivity by several decibels without increasing missed detections relative to the analytical detector. Under the same false alarm constraint, the CNN is competitive in some channels but currently trails the SVM in high-delay-spread multipath conditions.

0.39

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.56
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

From Identification to Discovery: Holistic RF Fingerprinting via Learning-Aided Quantization

eess.SP ·2026-10-05 ·Omer Hazan, Gil Paryanti, Nir Shlezinger
similarity 0.55
Abstract · Under review for publication in the IEEE

Radio frequency fingerprint identification (RFFI) enables device identification and authentication by exploiting transmitter-specific hardware impairments embedded in received RF signals. Existing RFFI methods are typically designed for a specific operating regime, such as closed-set identification, open-set recognition (OSR), or discovery of new devices, and often treat these tasks as separate algorithmic components. In this paper, we propose a holistic RFFI framework that jointly supports closed-set identification, OSR, and novel class discovery (NCD) within a single expandable architecture. The proposed method formulates RFFI as vector quantization in a learned latent feature space, where registered devices are represented by labeled codewords. This representation enables closed-set identification through codeword assignment, OSR through uncertainty measures induced by the codebook geometry, and NCD by using the latent representations and open-set uncertainty of rejected samples to organize them into new device identities. We further develop a multi-stage training procedure that combines supervised representation learning, latent-space refinement, codebook initialization, and vector-quantization-aware optimization. Experimental results on LoRa and WiFi RFFI datasets demonstrate that the proposed framework achieves accurate identification of registered devices, reliable detection of unseen transmitters, and effective discovery and registration of new device classes, highlighting the benefits of coupling the different RFFI tasks.

0.16

HFEMCNet: A Compact Hybrid Frequency Enriched Multi Channel Network for Automatic Modulation Classification

eess.SP cs.LG ·2026-08-25 ·Qamar Ijaz, Nayyer Aafaq
benchmark similarity 0.55
Abstract · 13 pages, 13 figures, 6 tables

Automatic modulation classification (AMC) of received radio signals is prudent for further signal processing tasks such as communication monitoring, cognitive radio operation, and interference mitigation in the electromagnetic spectrum. Traditional methods often rely on handcrafted features and struggle under complex channel conditions, whereas deep learning (DL) architectures can learn discriminative representations directly from raw signals. In this work, we propose HFEMCNet, a novel compact hybrid frequency-enriched multi-channel network that jointly exploits spatiotemporal dependencies and frequency domain information derived via Fast Fourier Transform (FFT). HFEMCNet integrates raw IQ samples with hierarchical spectral features to produce a rich signal representation, which is processed by convolutional layers for spatial feature extraction and Long Short-Term Memory (LSTM) units for temporal modeling. Experimental evaluation on benchmark datasets RML2016.10a, RML2016.10b, and over-the-air RML2018.01a demonstrates that HFEMCNet significantly outperform contemporary state-of-theart DL models in classification accuracy while achieving a reduced parameter count, smaller memory footprint, and lower tail-latency, making it suitable for real-time deployment on resource-constrained platforms. These results highlight the effectiveness of combining hybrid architectures with frequencydomain enrichment for robust and efficient AMC.

0.14

Interpretable Feature Learning for RF Fingerprinting via Polar MKANs

eess.SP cs.LG ·2026-08-20 ·Mikhail Krasnov, Ljupcho Milosheski, Carolina Fortuna
benchmark similarity 0.54
Abstract · 5 pages, 5 figures, 3 tables

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

0.36