CS Paper Radar

C$^2$T-OpenMax: A Novel Open-Set WiFi RF Fingerprinting Method via Center Constrained Learning and Confidence-Guided Tail Modeling

Yuanyu Zhang, Junjie Yang, Ji He, Shuangrui Zhao, Lele Zheng, Yulong Shen

cs.CR ·submitted 2026-09-02 02:32 UTC · v1

Abstract

Radio frequency fingerprinting (RFF) enables device authentication from transmitter-specific hardware imperfections, but practical deployment requires cross-environment open-set recognition. Data augmentation improves environmental generalization, yet may yield dispersed, low-confidence known-class representations that distort the class statistics used by OpenMax. To address this problem, we propose C$^2$T-OpenMax, an enhanced OpenMax framework combining center-constrained learning with confidence-guided tail modeling. The former improves intra-class compactness, making class-wise representations more suitable for distance-based modeling. The latter retains only correctly classified, high-confidence logits for mean activation vector estimation and Weibull fitting, reducing bias from ambiguous boundary samples. Together, the two modules refine representation geometry and OpenMax construction while preserving augmentation benefits. Experiments on a public WiFi CSI dataset show that C$^2$T-OpenMax achieves the highest open-set accuracy in seven of eight location groups and outperforms all baselines in area under the receiver operating characteristic curve (AUROC) and open-set classification rate (OSCR) across every tested openness level. Under the largest-openness setting, it improves accuracy by 12.31%, AUROC by 0.0887, and OSCR by 0.0856 over the augmented OpenMax baseline.

Closest papers

Nearest neighbours by meaning across the whole index.

From Identification to Discovery: Holistic RF Fingerprinting via Learning-Aided Quantization

eess.SP ·2026-10-05 ·Omer Hazan, Gil Paryanti, Nir Shlezinger
similarity 0.70
Abstract · Under review for publication in the IEEE

Radio frequency fingerprint identification (RFFI) enables device identification and authentication by exploiting transmitter-specific hardware impairments embedded in received RF signals. Existing RFFI methods are typically designed for a specific operating regime, such as closed-set identification, open-set recognition (OSR), or discovery of new devices, and often treat these tasks as separate algorithmic components. In this paper, we propose a holistic RFFI framework that jointly supports closed-set identification, OSR, and novel class discovery (NCD) within a single expandable architecture. The proposed method formulates RFFI as vector quantization in a learned latent feature space, where registered devices are represented by labeled codewords. This representation enables closed-set identification through codeword assignment, OSR through uncertainty measures induced by the codebook geometry, and NCD by using the latent representations and open-set uncertainty of rejected samples to organize them into new device identities. We further develop a multi-stage training procedure that combines supervised representation learning, latent-space refinement, codebook initialization, and vector-quantization-aware optimization. Experimental results on LoRa and WiFi RFFI datasets demonstrate that the proposed framework achieves accurate identification of registered devices, reliable detection of unseen transmitters, and effective discovery and registration of new device classes, highlighting the benefits of coupling the different RFFI tasks.

0.16

Interpretable Physics Informed WiFi Indoor Localization: Learning an Effective Access Point Geometry and Using It to Prune

cs.AI cs.LG ·2026-09-26 ·Arshia Eftekhari zadeh, Rezvan Nasiri, Hadi Moradi
similarity 0.60
Abstract

Deep learning models can achieve high accuracy for indoor localization, but their black-box nature limits interpretability and the reuse of learned information. We propose a hierarchical deep learning framework for WiFi fingerprint-based indoor localization that jointly predicts user location and learns an effective geometry of the surrounding access points (APs). Physics-informed decoders infer this geometry directly from RSSI measurements and labelled user positions, without requiring the true AP coordinates during training. The learned geometry is then used to rank and prune APs. On the UJIIndoorLoc dataset, the proposed chained model achieves a mean 3D localization error of 7.07 m, reducing error by 26% to 36% compared with baseline models. Previously published methods evaluated on the same official split report errors 10.6% to 31.0% higher. Pruning 35% or 50% of the APs causes only a small loss in localization accuracy. The inferred geometry also enables Fisher-information-based AP ranking even when fingerprint databases do not contain surveyed AP coordinates. Experiments on the Tampere/TUT and UTSIndoorLoc datasets show that geometry-guided AP selection performs comparably to selectors built directly from labelled data. These results show that physics-informed interpretability can improve indoor localization while also supporting effective feature selection.

0.07

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.59
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

Supervised Device Charting with CSI Measurements from Commercial 5G NR User Equipments

eess.SP cs.IT ·2026-09-21 ·Mischa Vasylyev, Frederik Zumegen, Reinhard Wiesmayr, Christoph Studer
similarity 0.59
Abstract · This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

Radio frequency fingerprint identification (RFFI) is a promising approach to distinguish physical wireless devices using hardware-induced signal imperfections. Conventional RFFI methods only provide discrete device labels and no human-interpretable representation of the relations among received signals. We propose supervised device charting, which maps location-insensitive channel-state information (CSI) fingerprints to a low-dimensional chart that visualizes cluster compactness, overlap, and outliers. We evaluate the method with real-world 5G New Radio (5G NR) measurements from six commercial smartphones and introduce the neighbor label error rate (NLER) to quantify class-separation accuracy. Our results demonstrate that two- and three-dimensional device charts provide an interpretable visualization of the learned RFFI representation. For three-dimensional device charts, the NLER is 0.22% for same-day measurements and 7.38% for measurements from the next day. The device charts reveal a cross-day distribution shift and map the held-out device close to the known device of the same model. Increasing the device chart dimensions further improves cluster separation at the expense of interpretability.

0.21

Interpretable Feature Learning for RF Fingerprinting via Polar MKANs

eess.SP cs.LG ·2026-08-20 ·Mikhail Krasnov, Ljupcho Milosheski, Carolina Fortuna
benchmark similarity 0.59
Abstract · 5 pages, 5 figures, 3 tables

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

0.36

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.58
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Calibrated RF-Fingerprinting Under Interference With Heterogeneous Transmission Protocols

cs.LG ·2026-09-17 ·Tariq Abdul-Quddoos, Xiangfang Li, Lijun Qian
publishedtheory similarity 0.57
Abstract

Radio Frequency(RF)-Fingerprinting is a spectrum monitoring technique that identifies specific transmitters based on hardware impairments imprinted within the emitted signal. Although widely researched, studies almost exclusively consider scenarios where only one transmitter is emitting at a time, limiting real world applicability. In this work, we further the study of RF-Fingerprinting by considering co-channel interference, with multiple emitted signals interfering with each other, overlapping in time and frequency. Specifically, we formulate this problem as a multi-label classification problem and employ a 1D convolutional neural network (CNN). Furthermore, the models are calibrated such that the confidence thresholds for the label probabilities are derived, with guarantees on the upper bound on the average number of False Negatives, providing a degree of confidence in not missing a true spectrum policy violation. The proposed method is validated using real world data from the POWDER 5G testbed on devices transmitting 802.11a(Wi-Fi), 4G LTE, and 5G NR waveforms. The results show accuracy as high as 97% and as low as 73% after calibration depending on channel conditions. Also calibrating for various average false negatives upper bounds achieves micro recall scores of approximately (1 - calibrated false negatives) with the calibration robust to out-of-distribution interference, demonstrating the potential of the proposed method in a realistic high contention wireless environment

0.38

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.57
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13