CS Paper Radar

Toward Interference-Agnostic RF Source Separation

Maxence Albert, Raphaël Duroselle, Thibaud Ehret, Olivier Boeffard, Jean-François Bonastre

cs.AI eess.SP ·submitted 2026-11-13 09:37 UTC · v1

Abstract

Separating a radio-frequency signal of interest from a co-channel interference is mostly addressed with specialized separators, each trained for one pair of signal and interference types and therefore relying on a label that a heavily jammed receiver cannot identify. We show that this reliance is not benign: applied to an interference it was not trained on, such a separator usually fails to recover the signal, and in most of the cases we measure it leaves the signal worse than no processing at all. We then train a single separator over every pair, giving it no indication at test time of which one it faces, on two architectures with no component in common: the convolutional WaveNet of the ICASSP 2024 RF Challenge, and a band-split transformer that we adapt from music source separation. Both behave the same way. At the size of one specialized model, the unified separator stays close to the whole models it replaces, keeping the bit error rate close on almost every pair, better on one and worse on another. On an interference absent from every training set, it does as well as the best specialized model, without anyone having to choose which one to deploy.

Comment
5 pages, 3 figures, 1 tabs. Submitted to ICASSP2027

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Where to Split: Dynamic Band Splitting for Audio Source Separation

cs.SD ·2026-10-10 ·Bingzhe Zhang, Kai Li, Xiaolin Hu
code/datacommunity pick similarity 0.63
Abstract · 25 pages, 11 figures, including appendices. Code and audio demos: https://cslikai.cn/Dynamic-Band-Splitting

Audio source separation models must preserve fine spectral structure while keeping the cost of the separator tractable. Band-split architectures reduce this cost by manually partitioning the spectrum into predefined frequency bands and encoding each band as a token, but the same boundaries are used for every mixture. Because informative spectral structure varies with source content, fixed boundaries can merge discriminative components or spend tokens where little resolution is needed. We introduce Dynamic Band Splitting (DBS), an end-to-end framework that adapts boundary locations and band widths to each mixture under a fixed band-token budget. DBS predicts content-conditioned boundary scores within frequency blocks, selects a prescribed number of boundaries using hard Top-$K$, and applies content-dependent pooling to obtain compact band tokens. After separation, it smooths and expands these tokens to the original STFT grid, refines them along frequency, and decodes complex masks with a frequency-shared head. DBS improved separation over the corresponding static models on DnR v2, MUSDB18-HQ, and EchoSet, with DBS-BSRNN achieving relative gain of 29.0% in average SI-SDR on DnR v2. These results and boundary analyses on DnR v2 show that content-adaptive frequency partitioning benefits multiple separator backbones under a fixed band-token budget. Code and audio demos are available at https://cslikai.cn/Dynamic-Band-Splitting

0.37

FlowSep-RF: Rectified Flow Matching for Single-Channel Radio-Frequency Signal Separation

eess.SP cs.LG ·2026-10-14 ·Mohamed Kamel, Tamer Nadeem
similarity 0.62
Abstract · 5 pages. Preprint. Under review

Single-channel radio-frequency (RF) signal separation is important for interference mitigation when a signal of interest overlaps with a co-channel interferer in time and frequency. Classical matched filtering and LMMSE receivers are limited under structured non-Gaussian interference, while diffusion and score-based methods often require iterative sampling or optimization. We propose FlowSep-RF, a rectified flow matching framework that learns a clean-endpoint transport from the received mixture to the signal of interest. The model combines time-domain IQ samples with frequency-domain features and recovers the separated waveform using one endpoint velocity evaluation. We evaluate FlowSep-RF on QPSK mixtures with OFDM-BPSK, OFDM-QPSK, and RFChallenge CommSignal2 interference against classical, discriminative, and generative baselines. FlowSep-RF achieves the lowest average BER and MSE among evaluated baselines across all three settings with one-step inference.

0.32

Clearing the Underbrush: AI-Enhanced RF Interference Suppression

cs.LG cs.AIeess.SP ·2026-08-25 ·Rahul Jain, Pierre Trepagnier, Rick Gentile, Joey Botero, Alexia Schulz
published similarity 0.60
Abstract · 7 pages, 10 figures, Accepted to the 2026 IEEE Military Communications Conference (MILCOM)

AI-based structured interference rejection has grown more popular because deep learning approaches can outperform traditional methods by jointly considering the signal of interest (SOI) and the signal mixture (SOI plus interference). This work builds on a previous AI-enabled approach utilizing autoregressive transformer-based models by adding a Finite Scalar Quantization (FSQ) tokenizer layer which aims to improve the interference rejection performance while keeping overall latency to a minimum. Additionally, we experiment with other inference optimization techniques with the goal of speeding up inference without much accuracy loss. We explore this space with an experiment where the SOI is a digitally modulated radio frequency (RF) signal and the structured interference is a digital television signal, an extremely common type of Orthogonal Frequency-Division Multiplexing (OFDM) transmission. Our results achieve low latency and increased interference rejection over traditional techniques and prior work with other AI-enabled methods. We demonstrate the benefits of the AI-enabled approaches via audio metrics such as Perceptual Evaluation of Speech Quality (PESQ). Additionally, we explore a variety of applications and detail how our interference rejection algorithm may be used in operationally-relevant scenarios.

0.27

SubRoformer: Subband Time-Domain Representation for Music Source Separation

eess.AS cs.SDeess.SP ·2026-11-05 ·Chunyat Wu, Chuang Ding, Paris Smaragdis, Qiuqiang Kong
code/data similarity 0.58
Abstract · 13 pages, 4 figures, 5 tables. Submitted to IEEE/ACM Transactions on Audio, Speech, and Language Processing

Music source separation extracts vocals and instruments from a mixed recording, enabling remixing, content production, and music analysis. Existing systems commonly operate on waveforms or full-band spectrograms. Waveform inputs contain many samples even in short segments, whereas a single spectrogram resolution imposes a shared time-frequency resolution trade-off across frequency ranges. We propose SubRoFormer, a Transformer-based system comprising a subband module and a residual RoFormer module. The subband module decomposes the mixture into frequency-localized, lower-rate signals for separation. It then reconstructs the target waveforms from the estimated subbands. The residual RoFormer module models temporal and cross-band relationships on temporally compressed features. It combines this context with fine-rate features through gated residual fusion to estimate source-specific complex masks. On the MUSDB18-HQ test set, training only on MUSDB18-HQ yields an average signal-to-distortion ratio (SDR) of 10.63 dB across four stems using target-specific models, achieving state-of-the-art performance among the compared systems without extra training data. With 500 additional training songs, a single model jointly separating all four stems achieves an average SDR of 11.59 dB, establishing state-of-the-art performance among the compared single-model multi-stem systems trained with extra data. Code and checkpoints are released at https://github.com/ArchiMickey/SubRoformer.

0.29

Calibrated RF-Fingerprinting Under Interference With Heterogeneous Transmission Protocols

cs.LG ·2026-09-17 ·Tariq Abdul-Quddoos, Xiangfang Li, Lijun Qian
publishedtheory similarity 0.58
Abstract

Radio Frequency(RF)-Fingerprinting is a spectrum monitoring technique that identifies specific transmitters based on hardware impairments imprinted within the emitted signal. Although widely researched, studies almost exclusively consider scenarios where only one transmitter is emitting at a time, limiting real world applicability. In this work, we further the study of RF-Fingerprinting by considering co-channel interference, with multiple emitted signals interfering with each other, overlapping in time and frequency. Specifically, we formulate this problem as a multi-label classification problem and employ a 1D convolutional neural network (CNN). Furthermore, the models are calibrated such that the confidence thresholds for the label probabilities are derived, with guarantees on the upper bound on the average number of False Negatives, providing a degree of confidence in not missing a true spectrum policy violation. The proposed method is validated using real world data from the POWDER 5G testbed on devices transmitting 802.11a(Wi-Fi), 4G LTE, and 5G NR waveforms. The results show accuracy as high as 97% and as low as 73% after calibration depending on channel conditions. Also calibrating for various average false negatives upper bounds achieves micro recall scores of approximately (1 - calibrated false negatives) with the calibration robust to out-of-distribution interference, demonstrating the potential of the proposed method in a realistic high contention wireless environment

0.38

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

eess.SP ·2026-08-16 ·Lucas Heublein, Inigo Cortes Vidal, Tobias Feigl, Alexander Rügamer, Felix Ott
publishedbenchmark similarity 0.57
Abstract · 15 pages, 14 figures

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

0.58

Iterative Audio Separation with Mixture Consistency via MIMO Model Extension

cs.SD cs.LG ·2026-09-07 ·Yukara Ikemiya, WeiHsiang Liao, Yuki Mitsufuji
similarity 0.57
Abstract

This paper proposes a general framework for stable and effective iterative audio separation with mixture consistency by extending source separation models to a multi-input multi-output (MIMO) configuration. In the field of audio separation, mixture consistency is an essential property for many applications that require accurate phase and timbral information of target sources. While iterative approaches such as diffusion models achieve perceptually superior results in speech enhancement or user-guided target source separation tasks, most existing methods focus on single-step separation with a single-input single-output (SISO) or single-input multi-output (SIMO) configuration through architectural improvements, since mixture-consistent audio separation is generally regarded as a regression problem that admits a unique solution. By extending these architectures to a MIMO configuration, we introduce iterative prediction without compromising the architectural advantages or the characteristics of mixture consistency. We conduct a comprehensive ablation study of combining the framework with discriminators and extending it to a generative model. Experimental results demonstrate significant performance improvements when applying the proposed framework to state-of-the-art separation models.

0.29

Real-Time Music Source Separation on a Low-Power Audio DSP

cs.SD ·2026-09-10 ·Jianan Li, Li Liu, Ken Malsky, Gabby Yi
unusual similarity 0.57
Abstract · 5 pages, 3 figures, 2 tables. Submitted to ICASSP 2027

Real-time music source separation is validated on desktop CPUs and GPUs. Does any published system fit the embedded audio hardware it targets? On a commercial audio DSP (2 MB SRAM, 2.07 GMAC/s measured), none does, and the constraints eliminate different models: memory rules out the 16-51 M parameter TasNet/X-UMX family, per-frame compute rules out RT-STT, needing 5.5x the available MAC rate. Parameter count predicts neither: weight reuse spans 1x to 345x. We then build one that fits. Training on continuous rather than block-padded convolution context proves essential: a model scoring 3.93 dB block-wise otherwise collapses to silence within 2 s frame-by-frame. A gated complex FIR deep filter adds a latency knob, gaining 0.38 dB even when strictly causal. It reaches 4.70 dB cSDR on MUSDB18-HQ and runs in 10.43 ms of an 11.6 ms hop, 0.5-0.7 dB behind systems that do not fit.

0.35